journal article·2020-11

Enhanced Current Efficiency of OLEDs with NPB (5 nm)/TCTA (5 nm) Multilayers Sandwiched Between ITO (Anode) and Alq3 (50 nm)/LiF (1 nm)/Al (Cathode)

R. Jbbar, A. Bahari, Duha S. Ahmed

Journal of Electronic Materials· Volume 49· Issue 11
Publisher page

Abstract

In the present work, organic light emitting diodes (OLEDs) with an ultra-thin layer of NPB (5 nm)/TCTA (5 nm)/NPB (5 nm)/TCTA (5 nm)/Alq3 (50 nm)/LiF (1 nm) are fabricated using physical vapor deposition at 1.33 × 10−9 kPa pressure. Each time the synthesized layer was placed on top of the previous layer. Up to five layers were formed between the anode (ITO) and Alq3 (50 nm)/LiF(1 nm)/the cathode (Al) layers, and each time the properties of the diode were investigated using GPS 132A, I–V curves and atomic force microscopy and by analyzing the luminance–voltage (L–V) and current density–voltage (J–V) curves. The obtained results indicate that sample b (ITO/NPB = 5 nm/TCTA = 5 nm/NPB = 5 nm/TCTA = 5 nm/Alq3 = 50 nm/LiF = 1 nm/Al = 100 nm) due to lower threshold voltage (8 V) (lower energy consumption), lower current density (56 A/m2), better brightness (L = 140 cd/m2) and higher current efficiency (2.5) than samples with one-, two-, three- and four-NPB = 5 nm/TCTA = 5 nm layers, which can be suggested in future generations of OLEDs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. V. Fallah, C. Momblona, D. Perez, A. Bahari, M. Sessolo, and H.J. Bolink, Dalton Trans. 48, 30 (2019).10.1039/C8DT03680B ↗
2. R. Hallani, V. Fallah, A.J. Huchaba, G. Galliani, A. Babaei, A. Bahari, M.L. Placa, I. McCulloch, M. Nazeeruddin, M. Sessolo, and H.J. Bolink, J. Mater. Chem. C 6, 12948 (2018).10.1039/C8TC05013A ↗
3. V. Fallah, A. Bahari, and N. Mirnia, Appl. Phys. A 126, 1 (2020).10.1007/s00339-019-3176-6 ↗
4. A.A. Ayobi, N. Mirnia, M. Rezaei, and A. Bahari, J. Mater. Sci. Mater. Electron. 30, 3952 (2019).10.1007/s10854-019-00680-y ↗
5. X. Haitao and Z. Xiang, J. Appl. Phys. 114, 2445051 (2013).10.1063/1.4852835 ↗
6. D. Dastan and A. Banpurkar, J. Mater. Sci. Mater. Electron. 28, 3851 (2017).10.1007/s10854-016-5997-9 ↗
7. A. Hashemi, A. Bahari, and S. Ghasemi, JOM 47, 3717 (2018).
8. S. Hoseinzadeh, R. Ghasemiasl, A. Bahari, and A.H. Ramzani, JOM 47, 3552 (2018).
9. H.-H. Chou and C.-H. Cheng, Adv. Mater. 22, 2468 (2010).10.1002/adma.201000061 ↗
10. J. Daniel and E.P. Gaspar, OLED Fundamentals: Materials, Devices, and Processing of Organic Light-Emitting Diodes, 1st ed. (Boca Raton: CRC Press, 2015), pp. 20–40.
11. M. Shahbazi, A. Bahari, and Sh Ghasemi, Synth. Met. 221, 332 (2016).10.1016/j.synthmet.2016.09.007 ↗
12. H. Uoyama, K. Goushi, K. Shizu, H. Nomura, and C. Adachi, Nature 492, 234 (2012).10.1038/nature11687 ↗
13. D. Shahjari, A. Bahari, P. Gill, and M. Mohsen, Opt. Mater. 64, 376 (2017).10.1016/j.optmat.2017.01.004 ↗
14. M. Segal, M.A. Baldo, R.J. Holmes, S.R. Forrest, and G. Soos, Phys. Rev. B 68, 075211 (2003).10.1103/PhysRevB.68.075211 ↗
15. A. Hashemi, A. Bahari, and Sh Ghasemi, J. Mater. Sci. Mater. Electron. 28, 13313 (2017).10.1007/s10854-017-7167-0 ↗
16. D. Dastan, N. Chaure, and M. Kartha, J. Mater. Sci. Mater. Electron. 28, 7784 (2017).10.1007/s10854-017-6474-9 ↗
17. R. Gholipur, Z. Khorshidi, and A. Bahari, ACS Appl. Mater. Interfaces 9, 12528 (2017).10.1021/acsami.7b02270 ↗
18. J.-F. Chang, W.-R. Chen, S.-M. Huang, Y.-C. Lai, X.-Y. Lai, Y.-W. Yang, and C.-H. Wang, Org. Electron. 27, 84 (2015).10.1016/j.orgel.2015.09.008 ↗
19. A. Hashemi and A. Bahari, Curr. Appl. Phys. 18, 1546 (2018).10.1016/j.cap.2018.09.014 ↗
20. S. Hoseinzadeh, R. Ghasemiasl, A. Bahari, and A.H. Ramzani, J. Mater. Sci. Mater. Electron. 28, 14446 (2017).10.1007/s10854-017-7306-7 ↗