Humidity Robustness of Plasma-Coated PCBs
Source abstract
Abstract
The reliability of printed circuit boards (PCB) is at risk due to continuous miniaturization. As a result, PCBs are more susceptible to external factors such as humidity, temperature, contamination, etc., which affect their general performance, leading to failure of electronic devices. Therefore, protection of the devices against these factors is gaining greatly in importance. Plasma polymerization is used as a method to form a protective barrier by applying plasma polymer films on PCBs. However, the humidity robustness of such plasma coatings on the PCB surface is unknown. In this work, several methods were used to characterize two types of plasma-coated PCBs based on 1H,1H,2H-perfluorodecyl acrylate precursor (single-layer and stacked coatings) upon exposure to humidity, temperature, and bias voltage. Modulated-temperature differential scanning calorimetry enabled thermal analysis of the plasma coatings. Electrochemical impedance spectroscopy in combination with the gravimetric moisture vapor sorption technique were used to study the interaction of these coatings with moisture and quantify the water uptake. The results revealed an only 2% increase of the capacitance of the coatings due to water uptake. Direct-current (DC) leakage current measurements were used to study the influence of a bias voltage applied between the electrodes on the coated PCBs upon exposure to cyclic climatic conditions. Electrical DC testing revealed the protective character of the stacked coating, which did not fail under the given stress conditions, in contrast to the single-layer plasma coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Copper Interconnects and Reliability · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R. Ambat and M. Jellesen, in European Corrosion Congress EUROCORR (2009), pp. 6–10.
2. P.B.P. Phipps and D.W. Rice, Corrosion Chemistry, ed. P. Beverley and P. Phipps (Chicago: American Chemical Society, 1979), p. 235.10.1021/bk-1979-0089.ch008 ↗
3. H. Conseil, M.S. Jellesen, and R. Ambat, in European Corrosion Congress EUROCORR (2014).
4. V. Verdingovas, M.S. Jellesen, and R. Ambat, J. Electron. Mater. 44, 4 (2015).10.1007/s11664-014-3609-0 ↗
5. K. Piotrowska, V.Verdingovas, M.S. Jellesen, and R. Ambat, in European Corrosion Congress EUROCORR (2015), pp. 1-10.
6. K. Piotrowska, M.S. Jellesen, and R. Ambat, in Proceedings of IMAPS Nordic Conference on Microelectronics Packaging (2018), pp. 72–76.
7. K. Piotrowska, V. Verdingovas, and R. Ambat, J. Mater. Sci. Mater. Electron. 29, 17834 (2018).10.1007/s10854-018-9896-0 ↗
8. M.S. Jellesen, P. Westermann, V. Verdingovas, P. Holm, and R. Ambat, in European Corrosion Congress EUROCORR (2011), pp. 1–14.
9. D. Minzari, F.B. Grumsen, M.S. Jellesen, P. Møller, and R. Ambat, Corros. Sci. 53, 1659 (2011).10.1016/j.corsci.2011.01.009 ↗
10. M.S. Leltesen, P. Westermann, U. Rathinavelu, D. Minzari, P. Møller, and R. Ambat, Corros. Manag. 17, 17 (2008).
11. V. Verdingovas, M.S. Jellesen, and R. Ambat, in European Corrosion Congress EUROCORR (2012), pp. 1–13.
12. A. Kakaroglou, M. Domini, and I. De Graeve, Surf. Coat. Technol. 303, 330 (2016).10.1016/j.surfcoat.2016.02.007 ↗
13. A. Kakaroglou, B. Nisol, T. Hauffman, I. De Graeve, F. Reniers, G. Van Assche, and H. Terryn, Surf. Coat. Technol. 259, 714 (2014).10.1016/j.surfcoat.2014.10.005 ↗
14. H.K. Yasuda, Plasma Polymerization, 1st ed. (London: Academic, 1985).
15. N. Morosoff, in Plasma Deposition, Treatment, and Etching of Polymers, ed. By R. d’Agostino (Academic, 1990), p. 1.10.1016/B978-0-12-200430-8.50007-5 ↗
16. P.G. De Gennes, Rev. Mod. Phys. 57, 827 (1985).10.1103/RevModPhys.57.827 ↗
17. R. Ambat, H. Conseil-Gudla, and V. Verdingovas, in Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, ed. By K. Wandelt (Elsevier, 2018), p. 134.10.1016/B978-0-12-409547-2.13437-7 ↗
18. H. Conseil, M.S. Jellesen, V. Verdingovas, and R. Ambat, in European Corrosion Congress EUROCORR (2013).
19. H. Conseil, M.S. Jellesen, and R. Ambat, in Proceeding of the 16th Electronics Packaging Technology Conference (2014), pp. 355–359.
20. J.B. Jacobsen, J.P. Krog, L. Rimestad, A. Riis, and A.H. Holm, IEEE Ind. Electron. Mag. 8, 51 (2014).10.1109/MIE.2014.2330912 ↗
21. L. Grace, L. Rodriguez, M. Fittipaldi, and C. García, in Proceedings of the American Society for Composites—29th Technical Conference; 16th US-Japan Conference on Composite Materials; ASTM-D30 Meeting (2014).
22. A. Lasia, Electrochemical Impedance Spectroscopy and its Applications (Elsevier, 2014).10.1007/978-1-4614-8933-7 ↗
23. A. Xu, F. Zhang, F. Jin, R. Zhang, B. Luo, and T. Zhang, Int. J. Electrochem. Sci. 9, 5116 (2014).10.1016/S1452-3981(23)08155-5 ↗
24. M. Konieczna, E. Markiewicz, and J. Jurga, Eng. Sci. (2010). https://doi.org/10.1002/pen.21687 .10.1002/pen.21687 ↗
25. S. Gómez-Barreiro, C. Gracia-Fernández, and L.N. Regueira, Dielectric Analysis. Experimental (2005).
26. H. Conseil, V.C. Gudla, M.S. Jellesen, and R. Ambat, IEEE Trans. Compon. Packag. Manuf. Technol. 6, 1379 (2016).10.1109/TCPMT.2016.2590779 ↗
27. A. Millela, R. Di Mundo, F. Palumbo, P. Favia, F. Fracassi, and R. d Agostino, Palsma Process. Polym. 6, 6 (2009).
28. U. Rathinavelu, M.S. Jellesen, P. Moller, and R. Ambat, IEEE Trans. Compon. Packag. Manuf. Technol. 2, 719 (2012).10.1109/TCPMT.2012.2186456 ↗
29. T.Y. Lin, B. Njoman, D. Crouthamel, K.H. Chua, S.Y. Teo, and Y.Y. Ma, Microelectron. Reliab. (2004). https://doi.org/10.1016/j.microrel.2003.08.003 .10.1016/j.microrel.2003.08.003 ↗
30. L. Ma, B. Sood, and M. Pecht, IEEE Trans. Device Mater. Reliab. 11, 66 (2011).10.1109/TDMR.2011.2106785 ↗
31. X. Fan, J. Zhou, and A. Chandra, in Proceedings of Electronic Components and Technology Conference (2008), pp. 1054–1066.