Enhanced Mechanical Properties of Li2O-Al2O3-SiO2 Photostructurable Glass by SrO Doping
Source abstract
Abstract
Li2O-Al2O3-SiO2 (LAS) photostructurable glasses (PSGs) are promising substrate materials with excellent three-dimensional shaping control. In this study, we prepared SrO-doped LAS-PSGs with different SrO content. The effect of SrO content on the dielectric and mechanical properties of the LAS-PSGs was investigated by deconvoluting (four-component) their Raman bands. The LAS-PSG sample with 1 wt% SrO exhibited enhanced mechanical properties: the enhanced surface micro-hardness of 568.20 HV, and the improved flexural strength of 157.23 MPa while maintaining a low dielectric loss of 4.1 × 10−3. These improvements of mechanical properties can be attributed to the increased relative fraction of Q3 units (Qn: n bridging oxygen bonds in a [SiO4] tetrahedral unit) in this sample. This is due to Q3 units being able to enhance the network structure of LAS-PSGs with little effect on [SiO4] tetrahedral units connections.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Glass properties and applications · Advanced ceramic materials synthesis · Luminescence Properties of Advanced Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Y. Kuang, D. Xiao, J. Zhou, W. Li, Z. Hou, H. Cui, and X. Wu, J. Micromech. Microeng. 28, 095004 (2018).10.1088/1361-6439/aac405 ↗
2. B. Peng, W. Hou, and Q. Xu, Opt. Commun. 424, 107 (2018).10.1016/j.optcom.2018.04.033 ↗
3. V. Sukumaran, T. Bandyopadhyay, V. Sundaram, and R. Tummala, IEEE Trans. Compon. Pack. Manuf. Technol. 2, 1426 (2012).10.1109/TCPMT.2012.2204392 ↗
4. V. Sukumaran, G. Kumar, K. Ramachandran, Y. Suzuki, K. Demir, Y. Sato, T. Seki, V. Sundaram, and R.R. Tummala, IEEE Trans. Compon. Pack. Manuf. Technol. 4, 786 (2014).10.1109/TCPMT.2014.2303427 ↗
5. J. Stillman, J. Judy, and H. Helvajian, Proc. SPIE 6882, 68820J (2008).10.1117/12.761895 ↗
6. L. Wenyin, W. Xuezhong, X. Dingbang, H. Zhanqiang, C. Zhihua, W. Xinghua, and Z. Jian, Microelectron. Eng. 165, 52 (2016).10.1016/j.mee.2016.09.001 ↗
7. T. Liang, J. Zhang, H. Chen, P. Zhang, H. Zhao, and G. Gan, Ceram. Int. 44, 8756 (2018).10.1016/j.ceramint.2018.01.209 ↗
8. H. Zhao, J. Zhang, H. Chen, T. Liang, and M. Wei, Ceram. Int. 44, 20821 (2018).10.1016/j.ceramint.2018.08.085 ↗
9. G.-H. Zhang, W.-W. Zheng, and K.-C. Chou, Mater. Trans. B. 48, 1134 (2017).10.1007/s11663-017-0916-x ↗
10. R. Wang, J. Zhou, B. Li, and L. Li, J. Alloy. Compd. 490, 204 (2010).10.1016/j.jallcom.2009.09.031 ↗
11. B. Li, S. Wang, and Y. Fang, J. Alloy. Compd. 693, 9 (2017).10.1016/j.jallcom.2016.09.043 ↗
12. F.E. Livingston, P.M. Adams, and H. Helvajian, Appl. Phys. A 89, 97 (2007).10.1007/s00339-007-4197-0 ↗
13. S. Mrotzek, A. Harnisch, D. Hülsenberg, and U. Brokmann, Glass Technol. 45, 97 (2004).
14. M. Wang, J. Cheng, M. Li, and F. He, Phys. B 406, 3865 (2011).10.1016/j.physb.2011.07.014 ↗
15. S. Petrescu, M. Constantinescu, E.M. Anghel, I. Atkinson, M. Olteanu, M. Zaharescu, and J. Non-Cryst, Solids 358, 3280 (2012).
16. A.K. Yadav and P. Singh, RSC Adv. 5, 67583 (2015).10.1039/C5RA13043C ↗
17. D.R. Neuville, Chem. Geol. 229, 28 (2006).10.1016/j.chemgeo.2006.01.008 ↗
18. X. Wang, D.R. Ou, Z. Zhao, and M. Cheng, Ceram. Int. 42, 7514 (2016).10.1016/j.ceramint.2016.01.158 ↗
19. H.R. Fernandes, D.U. Tulyaganov, M.J. Pascual, and J.M.F. Ferreira, Ceram. Int. 40, 129 (2014).10.1016/j.ceramint.2013.05.113 ↗
20. H.R. Fernandes, D.U. Tulyaganov, A. Goel, and J.M.F. Ferreira, J. Eur. Ceram. Soc. 32, 291 (2012).10.1016/j.jeurceramsoc.2011.09.017 ↗
21. H.R. Fernandes, D.U. Tulyaganov, M.J. Pascual, V.V. Kharton, A.A. Yaremchenko, and J.M.F. Ferreira, J. Eur. Ceram. Soc. 32, 2283 (2012).10.1016/j.jeurceramsoc.2012.02.003 ↗
22. R.B. Hilborn, J. Appl. Phys. 36, 1553 (1965).10.1063/1.1703085 ↗
23. D. Szwagierczak, B. Synkiewicz, and J. Kulawik, Ceram. Int. 44, 14495 (2018).10.1016/j.ceramint.2018.05.064 ↗
24. M.K. Mahapatra, K. Lu, and R.J. Bodnar, Appl. Phys. A 95, 493 (2009).10.1007/s00339-008-4926-z ↗
25. C.I. Merzbacher, W.B. White, and J. Non-Cryst, Solids 130, 18 (1991).
26. J. Salem, G. Quinn, and M. Jenkins, Fract. Mech. Ceram. 14, 531 (2005).
27. S.E. Elsaka and A.M. Elnaghy, Dent. Mater. 32, 908 (2016).10.1016/j.dental.2016.03.013 ↗
28. N. Kordani, A.S. Vanini, A. Asadi, and A. Jabbari, Neural Comput. Appl. 23, 2379 (2013).10.1007/s00521-012-1195-8 ↗
29. A. Coldea, M.V. Swain, and N. Thiel, Dent. Mater. 29, 419 (2013).10.1016/j.dental.2013.01.002 ↗
30. B. Strnadel, Int. J. Fract. 50, 17 (1991).10.1007/BF00035212 ↗
31. S. Lauvahutanon, H. Takahashi, M. Shiozawa, N. Iwasaki, Y. Asakawa, M. Oki, W.J. Finger, and M. Arksornnukit, Dent. Mater. 33, 705 (2014).10.4012/dmj.2014-208 ↗
32. M.N. Mandikos, G.P. McGivney, E. Davis, P.J. Bush, and J.M. Carter, J. Prosthet. Dent. 85, 386 (2001).10.1067/mpr.2001.114267 ↗