Viscoplasticity Behavior of a Solder Joint on a Drilled Cu Pillar Bump Under Thermal Cycling Using FEA
Source abstract
Abstract
Although the copper (Cu) pillar bump (CPB) was developed in accordance with recent trends of miniaturized, multifunctional, and high-performance technology, its thermomechanical reliability remains in question. Accordingly, a hole was drilled into a CPB to increase its thermomechanical reliability, and the viscoplasticity behaviors of the two structures were subsequently compared through finite element analysis. In particular, this study applied the Anand model, which addresses both plastic strain and creep strain, as well as a submodeling technique to increase the accuracy of the analysis and decrease the analysis time. In addition, this study confirmed the superiority of the thermomechanical reliability of drilled Cu pillar bump through a hysteresis loop, which showed the equivalent stress versus equivalent inelastic strain of the solder joint interfaces. Moreover, the study compared the inelastic strain energy density values. The results demonstrated that the drilled copper pillar bump does indeed have a smaller inelastic range and a lower inelastic strain energy density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. J. Maria, B. Dang, S.L. Wright, and J.U. Knickerbocker, Proceedings of the 61st Electronic Components and Technology Conference (ECTC) IEEE, 2011). doi: 10.1109/ECTC.2011.5898524 .10.1109/ECTC.2011.5898524 ↗
2. J.H. Lau, Flip Chip Technologies, 1st ed. (New York: McGraw-Hill, 1996), p. 162.
3. H.Y. Son, G.J. Jung, J.K. Lee, and K.W. Paik, Proceedings of the 57th Electronic Components and Technology Conference (ECTC)(IEEE, 2007). doi: 10.1109/ECTC.2007.373900 .10.1109/ECTC.2007.373900 ↗
4. Amkor Technology, Fine Pitch Copper Pillar Flip Chip ( www.amkor.com , 2015). http://www.amkor.com/go/Copper-Pillar-Flip-Chip . Accessed 23 Sept 2015.
5. K.J. Puttlitz and K.A. Stalter, Handbook of Lead-Free Solder Technology for Microelectronic Assemblies, 1st ed. (Boca Raton: CRC Press, 2004), p. 270.10.1201/9780203021484 ↗
6. L. Anand, Int. J. Plast. 1, 213 (1985).10.1016/0749-6419(85)90004-X ↗
7. S.B. Brown, K.H. Kim, and L. Anand, Int. J. Plast. 5, 95 (1989).10.1016/0749-6419(89)90025-9 ↗
8. S. Dongkai, Lead-Free Solder Interconnect Reliability (Geauga: ASM International, 2005), p. 184.
9. M. Goetz and B. Zahn, 2000 IEEWCPMT Int’l Electronics Manufacturing Technology Symposium (2000), p. 70.
10. JEDEC STANDARD, Temperature Cycling JESD22-A104D (Revision of JESD22-A104C, May 2005) (JEDEC Solid State Technology Association, 2009).
11. C. Xu, C. Gang, and S. Masao. Inter Society Conference on Thermal Phenomena (2004), p. 447.
12. N.J. Simon, E.S. Drexler, and R.P. Reed, Properties of Copper and Copper Alloys at Cryogenic Temperatures, NIST Monograph 177 (1992), pp. 6-1–6-17.
13. H.M. Ledbetter, J. Phys. Chem. 6, 1181 (1977).
14. JAHM Material Properties Database, MPDB v6.35 (JAHM Software Inc., North Reading, 2005).
15. T.A. Hahn, J. Appl. Phys. 41, 5096 (1970).10.1063/1.1658614 ↗
16. G.K. White and R.B. Roberts, High Temp High Press. 12, 311 (1980).
17. Y.-W. Cheng and T.A. Siewert, JEM 32, 6 (2003).
18. J.A. Bannantine, J.J. Comer, and J.L. Handrock, Fundamentals of Metal Fatigue Analysis, 1st ed. (Prentice Hall: Upper Saddle River, 1989), p. 52.