journal article·2016-12

Impact of an Elevated Temperature Environment on Sn-Ag-Cu Interconnect Board Level High-G Mechanical Shock Performance

Tae-Kyu Lee, Zhiqiang Chen, Greg Baty, Thomas R. Bieler, Choong-Un Kim

Journal of Electronic Materials· Volume 45· Issue 12
Publisher page

Abstract

The mechanical stability of Sn-Ag-Cu interconnects with low and high silver content against mechanical shock at room and elevated temperatures was investigated. With a heating element-embedded printed circuit board design, a test temperature from room temperature to 80°C was established. High impact shock tests were applied to isothermally pre-conditioned ball-grid array interconnects. Under cyclic shock testing, degradation and improved shock performances were identified associated with test temperature variation and non-solder mask defined and solder-mask defined pad design configuration differences. Different crack propagation paths were observed, induced by the effect of the elevated temperature test conditions and isothermal aging pre-conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. T. Mattila, J. Hokka, and M. Paulasto-Krockel, J. Electron. Mater. 43, 4090 (2014).10.1007/s11664-014-3298-8 ↗
2. D.R. Frear and P.T. Vianco, Metall. Trans. A 25A, 1509 (1994).10.1007/BF02665483 ↗
3. J. Glazer, Int. Mater. Rev. 40, 65 (1995).10.1179/imr.1995.40.2.65 ↗
4. K. Yazzie, H. Fei, J. Williams, H. Jiang, and N. Chawla, J. Electron. Mater. 38, 2746 (2009).10.1007/s11664-009-0889-x ↗
5. H.G. Song, J.W. Morris Jr., and F. Hua, JOM 56, 30 (2002).10.1007/BF02701846 ↗
6. H.K. Kim and K.N. Tu, Phys. Rev. B 53, 16027 (1996).10.1103/PhysRevB.53.16027 ↗
7. T.-K. Lee, C. Kim, and T. Bieler, J. Electron. Mater. 43, 69 (2014).10.1007/s11664-013-2736-3 ↗
8. T.-K. Lee, B. Zhou, T. Bieler, C. Tseng, and J. Duh, J. Electron. Mater. 42, 215 (2013).10.1007/s11664-012-2340-y ↗
9. T.-K. Lee, W. Xie, and C. Guirguis, in Proceeding of IEEE 65th Electronic Components and Technology Conference (2015), pp. 1560–1565.
10. V. Fiori, K. Ewuame, S. Lallois-Garreignot, H. Jaouen, and C. Tavernier, Microelectron. Reliab. 54, 764 (2014).10.1016/j.microrel.2013.12.022 ↗
11. J. Karppinen, T. Laurila, T. Mattila, and M. Paulasto-Krockel, J. Electron. Mater. 41, 3232 (2012).10.1007/s11664-012-2192-5 ↗
12. B. Noh, J. Yoon, S. Ha, and S. Jung, J. Electron. Mater. 40, 224 (2011).10.1007/s11664-010-1423-x ↗
13. W. Peng and M.E. Marques, J. Electron. Mater. 36, 1679 (2007).10.1007/s11664-007-0260-z ↗
14. JEDEC JC-14 Committee, Board Level Drop Test Method of Components for Handheld Electronic Products (JEDEC Standard JESD22-B111, 2003). www.jedec.org/standards- documents/docs/jesd-22-b111 .
15. J. Savic, M. Nagar, W. Xie, M. Ahmad, D. Senk, A. Bansal, N. Islam, P. Oh, R. Pendse, H. Choi, and S. Lee, in Proceeding of IEEE 62nd Electronic Components and Technology Conference (2012), pp. 450–456.