journal article·2016-03

Thermal Conductivity Measurement of Liquid-Quenched Higher Manganese Silicides

Shunsuke Nishino, Masanobu Miyata, Keisuke Ohdaira, Mikio Koyano, Tsunehiro Takeuchi

Journal of Electronic Materials· Volume 45· Issue 3
Publisher page

Abstract

Higher manganese silicides (HMSs, MnSiγ, γ ∼ 1.75) show promise for use as low-cost and environmentally friendly thermoelectric materials. To reduce their thermal conductivity, we partially substituted the Mn site with heavy elements using liquid quenching. Fabricated samples possess a curly ribbon-shape with about a 10-μm thickness and 1-mm width, with high surface roughness. In this study, we determined the thermal conductivity of the curly-ribbon-shaped samples using two independent methods: the 3ω method with two heat flow models, and the steady-state method using a physical property measurement system (PPMS; Quantum Design). We succeeded in estimating the thermal conductivity at the temperature range of 100–200 K using the PPMS. The estimated thermal conductivity of non-doped HMSs shows a constant value without temperature dependence of 2.2 ± 0.8 W K−1m−1 at 100–200 K. The difference of thermal conductivities of W-doped and non-doped HMSs was not recognized within the measurement error.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal properties of materials · Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Y. Miyazaki, Y. Saito, K. Hayashi, K. Yubuta, and T. Kajitani, J. Appl. Phys. 50, 035804 (2011).10.7567/JJAP.50.035804 ↗
2. T. Itoh and M. Yamada, J. Electron. Mater. 38, 925 (2009).10.1007/s11664-009-0697-3 ↗
3. Y. Sadia, M. Elegrably, O. Ben-Nun, Y. Marciano, and Y. Gelbstein, J. Nanomater. 2013, 5 (2013).10.1155/2013/701268 ↗
4. Y. Kikuchi, T. Nakajo, K. Hayashi, and Y. Miyazaki, J. Alloys Compd. 616, 263 (2014).10.1016/j.jallcom.2014.07.106 ↗
5. A. Yamamoto, S. Ghodke, H. Miyazaki, M. Inukai, Y. Nishino, M. Matsunami, and T. Takeuchi, Jpn. J. Appl. Phys. (in press).
6. W. Luo, H. Li, Y. Yan, Z. Lin, X. Tang, Q. Zhang, and C. Uher, Intermetallics 19, 404 (2011).10.1016/j.intermet.2010.11.008 ↗
7. W. Luo, H. Li, F. Fu, W. Hao, and X. Tang, J. Electron. Mater. 40, 1233 (2011).10.1007/s11664-011-1612-2 ↗
8. G. Tan, W. Liu, S. Wang, Y. Yan, H. Li, X. Tang, and C. Uher, J. Mater. Chem. A 1, 12657 (2013).10.1039/c3ta13024j ↗
9. G. Tan, Y. Zheng, and X. Tang, Appl. Phys. Lett. 103, 183904 (2013).10.1063/1.4827555 ↗
10. S. Nishino, M. Koyano, K. Suekuni, and K. Ohdaira, J. Electron. Mater. 43, 2151 (2014).10.1007/s11664-014-2993-9 ↗
11. S. Nishino, M. Koyano, and K. Ohdaira, J. Electron. Mater. 44, 2034 (2015).10.1007/s11664-015-3650-7 ↗
12. M. Takashiri, M. Takiishi, S. Tanaka, K. Miyazaki, and H. Tsukamoto, J. Appl. Phys. 101, 074301 (2007).10.1063/1.2717867 ↗
13. D.G. Cahill, Rev. Sci. Instrum. 61, 802 (1990).10.1063/1.1141498 ↗
14. A. Holtzman, E. Shapira, and Y. Selzer, Nanotechnology 23, 495711 (2012).10.1088/0957-4484/23/49/495711 ↗
15. T.Y. Choi, D. Poulikakos, J. Tharian, and U. Sennhauser, Appl. Phys. Lett. 87, 013108 (2005).10.1063/1.1957118 ↗
16. D.W. Oh, A. Jain, J.K. Eaton, K.E. Goodson, and J.S. Lee, Int. J. Heat Fluid Fl. 29, 1456 (2008).10.1016/j.ijheatfluidflow.2008.04.007 ↗
17. X.J. Hu, A.A. Padilla, J. Xu, T.S. Fisher, and K.E. Goodson, J. Heat Transf. 128, 1109 (2006).10.1115/1.2352778 ↗
18. S. Okada and H. Matsumura, Jpn. J. Appl. Phys. 36, 7035 (1997).10.1143/JJAP.36.7035 ↗
19. Flow Science, www.flow3d.com . Accessed 12 Aug 2015.