Lithium Ion Secondary Cell Prepared by a Printing Procedure, and Its Application to All-Solid-State Inorganic Lithium Ion Cells
Source abstract
Abstract
We have developed a straightforward printing method for preparation of a lithium secondary cell. LiCo1/3Ni1/3Mn1/3O2 and Li4Ti5O12 viscous printable pastes were used for the cathode and anode, respectively. Electrochemical measurement was used to characterize the capacitance of each cell, and field-emission scanning electron microscopy and particle size measurements were used to characterize particle size and morphology. These film electrodes functioned stably both in a standard liquid electrolyte and in an Li2SiO3 solid electrolyte, although the capacitance of the all-solid-state cell was significantly lower than that of the cell containing liquid electrolyte. When liquid electrolyte was used, the capacity decreased by 36% after 50 cycles. However, the capacity of 0.2 mA h/g remained almost the same even after 50 charge–discharge cycles, demonstrating the stability and strength of the all-solid-state lithium ion cell. It was also found that the cell resistance mostly arose from the electrode/electrolyte interface and not from the bulk electrolyte. Addition of a sol–gel to the solid electrolyte printable paste improved cell performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. M. Hakamada and M. Mabuchi, J. Mater. Res. 24, 301 (2009).10.1557/JMR.2009.0037 ↗
2. J. Fu, J. Am. Ceram. Soc. 80, 1901 (1997).10.1111/j.1151-2916.1997.tb03070.x ↗
3. T. Doi, Y. Iriyama, T. Abe, and Z. Qgumi, J. Power Sources 142, 329 (2005).10.1016/j.jpowsour.2004.10.020 ↗
4. Y. Inaguma, C. Liquan, M. Itoh, T. Nakamura, T. Ichida, H. Ikuta, and M. Wakihara, Solid State Commun. 86, 689 (1993).10.1016/0038-1098(93)90841-A ↗
5. T. Abe, M. Ohtsuka, F. Sagane, Y. Iriyama, and Z. Ogumi, J. Electrochem. Soc. 151, A1950 (2004).10.1149/1.1804813 ↗
6. H. Aono, E. Sugimoto, Y. Sadaoka, N. Imanaka, and G. Adachi, J. Electrochem. Soc. 137, 1023 (1990).10.1149/1.2086597 ↗
7. R. Murugan, V. Thangadurai, and W. Weppner, Angew. Chem. Int. Ed. 46, 7778 (2007).10.1002/anie.200701144 ↗
8. H. Nakano, K. Dokko, J. Sugaya, T. Yasukawa, T. Matsue, and K. Kanamura, Electrochem. Commun. 9, 2013 (2007).10.1016/j.elecom.2007.05.020 ↗
9. M. Nakayama, S. Wada, S. Kuroki, and M. Nogami, Energy Environ. Sci. 3, 1995 (2010).10.1039/c0ee00266f ↗
10. H. Kitaura, A. Hayashi, K. Tadanaga, and M. Tatsumisago, J. Power Sources 189, 145 (2009).10.1016/j.jpowsour.2008.10.005 ↗
11. Y. Nishio, H. Kitaura, A. Hayashi, and M. Tatsumisago, J. Power Sources 189, 629 (2009).10.1016/j.jpowsour.2008.09.064 ↗
12. M. Nagao, H. Kitaura, A. Hayashi, and M. Tatsumisago, J. Power Sources 189, 145 (2009).10.1016/j.jpowsour.2008.09.025 ↗
13. A.D. Robertson, A.W. West, and A.G. Ritchie, Solid State Ion. 104, 1 (1997).10.1016/S0167-2738(97)00429-3 ↗
14. H.Y.P. Hong, Mater. Res. Bull. 13, 117 (1978).10.1016/0025-5408(78)90075-2 ↗
15. J. Xie, N. Imanishi, T. Zhang, A. Hirano, Y. Takeda, and O. Yamamoto, J. Power Sources 189, 365 (2009).10.1016/j.jpowsour.2008.08.015 ↗
16. H. Aono, H. Imanaka, and G.Y. Adachi, Acc. Chem. Res. 27, L78 (1994).10.1021/ar00045a002 ↗
17. R. Mori, T. Ueta, K. Sakai, Y. Niida, Y. Koshiba, L. Lei, K. Nakamae, and Y. Ueda, J. Mater. Sci. 46, 1341 (2011).10.1007/s10853-010-4925-2 ↗
18. M. Ganesan, Ionics 15, 609 (2009).10.1007/s11581-008-0310-4 ↗
19. N. Kamarulzaman, R. Yusoff, N. Kamarudin, N.H. Shaari, N.A. Abdul Aziz, M.A. Bustam, N. Blagojevic, M. Elcombe, M. Blackford, M. Avdeev, and A.K. Arof, J. Power Sources 188, 274 (2009).10.1016/j.jpowsour.2008.10.139 ↗
20. H. Xia, S.B. Tang, and L. Lu, J. Alloys Compd. 449, 296 (2008).10.1016/j.jallcom.2006.02.097 ↗
21. Y.J. Shin, W.J. Choi, Y.S. Hong, S. Yoon, K.S. Ryu, and S.H. Chang, Solid State Ion. 177, 515 (2006).10.1016/j.ssi.2005.11.019 ↗
22. M. Manicham and M. Takata, J. Power Sources 114, 298 (2003).10.1016/S0378-7753(02)00586-4 ↗
23. W. Lu, A. Jansen, D. Dees, and G. Henriksen, J. Mater. Res. 25, 1656 (2010).10.1557/JMR.2010.0214 ↗
24. Y. Li, S. Zhao, C. Nan, and B. Li, J. Alloy Compd. 509, 957 (2011).10.1016/j.jallcom.2010.08.154 ↗
25. A. Mei, X.L. Wang, Y.C. Feng, S.J. Zhao, G.J. Li, H.X. Geng, Y.H. Lin, and C.W. Nan, Solid State Ion. 179, 2255 (2008).10.1016/j.ssi.2008.08.013 ↗
26. A. Nakagawa, N. Kuwata, Y. Matsuda, and J. Kawamura, J. Phys. Soc. Jpn. 79, 98 (2010).10.1143/JPSJS.79SA.98 ↗
27. R.D. Shannon, B.E. Taylor, A.D. English, and T. Berzins, Electrochim. Acta 22, 783 (1977).10.1016/0013-4686(77)80035-2 ↗
28. Y.-W. Hu, I.D. Raistrick, and R.A. Huggins, J. Electrochem. Soc. 124, 1240 (1997).10.1149/1.2133537 ↗
29. A. Sakuda, H. Kitaura, A. Hayashi, K. Tadanaga, and M. Tatsumisago, Electrochem. Solid-State Lett. 11, A1 (2008).10.1149/1.2795837 ↗
30. A. Sakuda, H. Kitaura, A. Hayashi, K. Tadanaga, and M. Tatsumisago, J. Electrochem. Soc. 156, A27 (2009).10.1149/1.3005972 ↗
31. A. Sakuda, H. Kitaura, A. Hayashi, K. Tadanaga, and M. Tatsumisago, J. Power Sources 189, 527 (2009).10.1016/j.jpowsour.2008.10.129 ↗
32. Y. Sakurai, A. Sakuda, H. Kitaura, A. Hayashi, and M. Tatsumisago, Solid State Ion. 182, 59 (2011).10.1016/j.ssi.2010.12.001 ↗
33. M. Smaihi, D. Petit, F. Gourbilleau, F. Chaput, and J.P. Boilot, Solid State Ion. 48, 213 (1991).10.1016/0167-2738(91)90035-A ↗