Thermoelectric Properties of Nano/microstructured p-Type Bi0.4Sb1.6Te3 Powders Fabricated by Mechanical Alloying and Vacuum Hot Pressing
Source abstract
Abstract
Two kinds of Bi 0.4 Sb 1.6 Te 3 powder with different particle and grain sizes were fabricated by high-energy ball milling. Powder mixtures with varied weight ratios were consolidated by vacuum hot pressing (HP) to produce nano/ microstructured composites of identical chemical composition. From measurements of the Seebeck coefficient, electrical resistivity, and thermal conductivity of these composites, a figure of merit ( ZT ) value of up to 1.19 was achieved at 373 K for the sample containing 40% nanograin powder. This ZT value is higher than that of monolithic nanostructured Bi 0.4 Sb 1.6 Te 3 . It is further noted that the ZT value of this sample in the temperature range of 450 K to 575 K is in the range of 0.7 to 1.1. Such ZT characteristics are suitable for power generation applications as no other material with a similar high ZT value in this temperature range has been observed until now. The achieved high ZT value can probably be attributed to the unique nano/microstructure, in which the dispersed nanograin powder increases the number of phonon scattering sites, which in turn results in a decrease of the thermal conductivity while simultaneously increasing the electrical conductivity, owing to the existence of the microsized powder that can provide a fast carrier transportation network. These results indicate that the nano/microstructured Bi 0.4 Sb 1.6 Te 3 alloy can serve as a high-performance material for application in thermoelectric devices.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. G. Mahan, B. Sales, and J. Sharp, Phys. Today 50, 42 (1997).10.1063/1.881752 ↗
2. J.H. Son, M.W. Oh, B.S. Kim, S.D. Park, B.K. Min, M.H. Kim, and H.W. Lee, J. Alloy. Compd. 566, 168 (2013).10.1016/j.jallcom.2013.03.062 ↗
3. J. Jiang, L. Chen, S. Bai, and Q. Yao, J. Alloy. Compd. 390, 208 (2005).10.1016/j.jallcom.2004.07.056 ↗
4. V.B. Osvenskiy, V.P. Panchenko, Yu. N. Parkhomenko, A.I. Sorokin, D.I. Bogomolov, V.T. Bublik, and N. Yu. Tabachkova, J. Alloy. Compd. (in press).
5. X.A. Fan, J.Y. Yang, W. Zhu, S.Q. Bao, X.K. Duan, C.J. Xiao, and K. Li, J. Alloy. Compd. 461, 9 (2008).10.1016/j.jallcom.2007.07.007 ↗
6. J.S. Lee, T.S. Oh, and D.B. Hyun, J. Mater. Sci. 35, 881 (2000).10.1023/A:1004790106241 ↗
7. P. Pichanusakorn and P. Bandaru, Mater. Sci. Eng. R 67, 19 (2010).10.1016/j.mser.2009.10.001 ↗
8. D.L. Medlin and G.J. Snyder, Curr. Opin. Colloid Interface Sci. 14, 226 (2009).10.1016/j.cocis.2009.05.001 ↗
9. L.D. Chen, X.Y. Huang, M. Zhou, X. Shi, and W.B. Zhang, J. Appl. Phys. 99, 064305 (2006).10.1063/1.2180432 ↗
10. L.-D. Zhao, B.-P. Zhang, W.-S. Liu, and J.-F. Li, J. Appl. Phys. 105, 023704 (2009).10.1063/1.3063694 ↗
11. Y. Li, J. Jiang, G. Xu, W. Li, L. Zhou, Y. Li, and P. Cui, J. Alloy. Compd. 480, 954 (2009).10.1016/j.jallcom.2009.02.097 ↗