journal article·2021-09

Synthesis, Characterization, Thermal Behavior, and Dielectric Properties of Methacrylate Polymers Containing Imine Bonding

Adnan Solmaz, Zülfiye Ilter, Ismet Kaya

Journal of Electronic Materials· Volume 50· Issue 9
Publisher page

Abstract

Two different Schiff bases, viz. 1-{4-[(5-bromo-2-hydroxybenzyliden)amino]phenyl}ethanone (5-Br-2HBAPE) and 1-{4-[(4-hydroxybenzylidene)amino]phenyl}ethanone (4-HBAPE), have been prepared by condensation of 5-bromosalicylaldehyde and 4-hydroxybenzaldehyde with 4-aminoacetophenone in ethanol at molar ratio of 1:1. Then, Schiff base methacrylate monomers, i.e., 2-(((4-acetylphenyl)imino)methyl)-4-bromophenylmethacrylate (APIMBPM) and 2-(((4-acetylphenyl)imino)methyl)phenylmethacrylate (APIMPM), were synthesized by reaction of each Schiff base compound with methacryloylchloride at 0°C to 5°C. Schiff base methacrylate polymers poly(APIMBPM) and poly(APIMPM) were then prepared by free-radical polymerization in tetrahydrofuran (THF) at 70°C using azobisisobutyronitrile (AIBN) as initiator. The structure of 5-Br-2HBAPE, 4-HBAPE, APIMBPM, APIMPM, poly(APIMBPM), and poly(APIMPM) was confirmed by Fourier-transform infrared (FT-IR) and 1H and 13C nuclear magnetic resonance (NMR) spectroscopy. The thermal behavior of poly(APIMBPM) and poly(APIMPM) was studied by differential scanning calorimetry (DSC) and thermogravimetry (TG). The glass-transition temperature (Tg) of poly(APIMBPM) and poly(APIMPM) was found to be 113°C and 108°C, respectively. The residual amount of poly(APIMBPM) and poly(APIMPM) at 1000°C was found to be 45.60% and 26.35%, respectively. Dielectric and conductivity measurements were carried out on the Schiff base methacrylate polymers by impedance analysis as a function of frequency. The conductivity of poly(APIMBPM) and poly(APIMPM) was found to be 1.30 × 10−9 S cm−1 and 2.14 × 10−9 S cm−1, respectively. Scanning electron microscopy (SEM) was used to investigate the morphology of the Schiff base methacrylate polymers, and their antimicrobial activity against bacteria and fungus was determined by disk diffusion method. Poly(APIMBPM) exhibited good antibacterial property against Klebsiella pneumonia. Poly(APIMBPM) and poly(APIMPM) exhibited good antifungal action against Candida albicans. We thus describe the synthesis of different Schiff base methacrylate polymers and their thermal behavior, electrical properties, and antimicrobial activities.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Synthesis and properties of polymers · Conducting polymers and applications · Inorganic and Organometallic Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. H. Schiff, Eur. J. Org. Chem. 150, 193 (1869).
2. C.M. Sharaby, M.F. Amine, and A.A. Hamed, J. Mol. Struct. 1134, 208 (2017).10.1016/j.molstruc.2016.12.070 ↗
3. C. Redshaw, Catalysts 7, 165 (2017).10.3390/catal7050165 ↗
4. D.W. Roberts, T.W. Schultz, and A.M. Api, Chem. Res. Toxicol. 30, 1309 (2017).10.1021/acs.chemrestox.7b00050 ↗
5. R.J. Dirisio, J.E. Armstrong, M.A. Frank, W.R. Lake, and W.R. McNamara, Dalton Trans. 46, 10418 (2017).10.1039/C7DT01750B ↗
6. K.K. Upadhyay, A. Kumar, S. Upadhyay, and P.C. Mishra, J. Mol. Struct. 873, 5 (2008).10.1016/j.molstruc.2007.02.031 ↗
7. K. Faghihi, and H. Moghanian, Chin. J. Polym. Sci. 28, 695 (2010).10.1007/s10118-010-9119-5 ↗
8. J.W. Nicholson, P.J. Brookman, O.M. Lacy, G.S. Sayers, and A.D. Wilson, J. Biomed. Mater. Res. 22, 623 (1988).10.1002/jbm.820220704 ↗
9. S. Parker, and M. Braden, Biomaterials 10, 91 (1989).10.1016/0142-9612(89)90037-9 ↗
10. J.N. Patel, M.B. Dolia, K.H. Patel, and R.M. Patel, J. Polym. Res. 13, 219 (2006).10.1007/s10965-005-9029-3 ↗
11. Y. Açıkbaş, N. Çankaya, R. Capan, M. Erdoğan, and C. Soykan, J. Macromol. Sci. Part A Pure Appl. Chem. 53, 18 (2016).10.1080/10601325.2016.1110453 ↗
12. M. Grigoras, and C.O. Catanescu, J. Macromol. Sci. Pure Appl. Chem. Polym. C 44, 131 (2007).10.1080/10601320601030657 ↗
13. S.A. Jenekhe, C.J. Yang, H. Vanherzeele, and J.S. Meth, Chem. Mater. 3, 985 (1991).10.1021/cm00018a001 ↗
14. J.H. Flynn, and L.A. Wall, J. Res. Nat. Bur. Stand A Phys Chem. 70A, 487 (1966).10.6028/jres.070A.043 ↗
15. W.W. Wendlandt, Thermal analysis, 3rd ed., (London: Wiley, 1986).
16. C.D. Doyle, J. Appl. Polym. Sci. 5, 285 (1961).10.1002/app.1961.070051506 ↗
17. A.W. Coats, and J.P. Redfen, Nature 201, 68 (1964).10.1038/201068a0 ↗
18. K. Orsolya, P. Bardos, S. Boyadjiev, T. Igricz, Z. Kristof, N. Imre, and M. Szilagyi, J. Therm. Anal. Calorim. 137, 1249 (2019).10.1007/s10973-019-08030-0 ↗
19. B. Asma, M. Afzal, A. Javed, M. Nadeem, and M.M. Hassan, Curr. Appl. Phys. 10, 601 (2010).10.1016/j.cap.2009.08.004 ↗
20. F. Yakuphanoglu, Y.T. Yoo, and M. Okutan, Ann. Phys. 13, 559 (2004).10.1002/andp.200310094 ↗
21. H.Ö. Demir, and S. Özkaya, J. Electron. Mater. 46, 321 (2017).10.1007/s11664-016-4911-9 ↗
22. F. Yakuphanoglu, M. Okutan, Q. Zhuang, and Z. Han, Phys. B 365, 13 (2005).10.1016/j.physb.2005.04.035 ↗
23. S. Wang, X. Yang, T. Zhu, L. Bo, R. Wang, S. Huang, C. Wang, D. Jiang, H. Chen, and R.A. Jones, Dalton Trans. 47, 53 (2018).10.1039/C7DT02576A ↗
24. F. Biryan, and G. Pihtili, J. Therm. Anal. Calorim. 139, 3857 (2020).10.1007/s10973-019-09243-z ↗
25. F. Kolcu, and İ Kaya, RSC Adv. 15, 8973 (2017).10.1039/C6RA28475B ↗
26. S.A. Amer, M. Gaber, and R.M. Issa, Polyhedron 7, 2635 (1988).10.1016/S0277-5387(00)83885-1 ↗
27. J.F. Brown, J. Am. Chem. Soc. 77, 6341 (1955).10.1021/ja01628a078 ↗
28. A.A.A. Emara, Synth. React. Inorg. Met. Org. Chem. 29, 87 (1999).10.1080/00945719909349436 ↗
29. G.C. Levy, and G.L. Nelson, Carbon-13 nuclear magnetic resonance for organic chemists (New York: Wiley-Interscience, 1972).
30. C. Acquah, M.K. Danquah, C.K.S. Moy, M. Anwar, and C.M. Ongkudon, Can. J. Chem. Eng. 95, 1345 (2017).10.1002/cjce.22781 ↗
31. H. Jeske, A. Schirp, and F. Cornelius, Thermochim Act. 543, 165 (2012).10.1016/j.tca.2012.05.016 ↗
32. X. Meng, Y. Huang, H. Yu, and Z. Lv, Polym. Degrad. Stab. 92, 962 (2007).10.1016/j.polymdegradstab.2007.03.005 ↗
33. A. Kurt, and M. Koca, J. Eng. Res. 4, 46 (2016).
34. İ Kaya, and Z.F. Yetkin, J. Electron. Mater. 48, 425 (2019).10.1007/s11664-018-6719-2 ↗
35. D. Sengottuvelu, M. Athianna, and A. Siddeswaran, Spectrochim. Acta Part A Mol. Biomol. Spectr. 246, 118989 (2021).10.1016/j.saa.2020.118989 ↗
36. D.W. van Krevelen, Polymer 16, 615 (1975).10.1016/0032-3861(75)90157-3 ↗
37. A. Açıkses, N. Çömez, and F. Biryan, J. Macromol. Sci. Part A Pure Appl. Chem. 56, 253 (2019).10.1080/10601325.2019.1565547 ↗
38. A. Kaya, Ö. Vural, H. Tecimer, S. Demirezen, and Ş Altındal, Curr. Appl. Phys. 14, 322 (2014).10.1016/j.cap.2013.12.005 ↗
39. X.L. Liu, Y.J. Xu, and M.L. Go, Eur. J. Med. Chem. 43, 1681 (2008).10.1016/j.ejmech.2007.10.007 ↗
40. C.H. Collins and P.M. Lyne, Microbiological Methods (London: Butterworth, 1987).
41. İ Erol, C. Soykan, and S. Kirbag, J. Appl. Polym. Sci. 90, 3244 (2003).10.1002/app.12981 ↗
42. İ Erol, J. Polym. Sci. A Polym. Chem. 42, 3157 (2004).10.1002/pola.20132 ↗