journal article·2021-03

Surface-Oxidation-Induced Constrained Volume Expansion of Commercial Silicon Flakes as High-Performance Anode Material for Lithium-Ion Batteries

Hao Tang, Xin Jin, Long Tan, Liekai Liu, Runguang Sun

Journal of Electronic Materials· Volume 50· Issue 3
Publisher page

Abstract

The performance of silicon (Si) material as the anode of lithium-ion batteries (LIBs) depends on its size, structure, morphology, composition, etc. Commercial Si flakes produced by sawing waste Si wafers, which are promising for application as the anode material in LIBs, have been investigated. The Si flakes were thermally treated at 800°C under N2 gas at a flow rate of 150 mL min−1. The limited oxidation reaction between the Si flakes and residual oxygen with the assistance of N2 generated a thin layer of SiOx on their surface, effectively suppressing the volume expansion during Li+ insertion/deinsertion, as evidenced by the well-maintained surface morphology of thermally treated Si electrodes in charge–discharge testing. Indeed, the electrochemical performance of the Si material was greatly enhanced. Capacity as high as 2131.8 mAh g−1 was obtained for thermally treated Si after 30 cycles, whereas pristine Si almost lost its activity. Moreover, the initial coulombic efficiency was greatly increased from 63.1% to 87.9%. Overall, the findings of this work indicate that this approach is appropriate to synthesize high-performance Si anode material that can also be considered as a Si source for further synthesis of Si-based composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Extraction and Separation Processes · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. J. Li and J.R. Dahn, Electrochem. Soc. 154, 156 (2007).10.1149/1.2409862 ↗
2. A. Magasinski, B. Zdyrko, I. Kovalenko, B. Hertzberg, R. Burtovyy, and C.F. Huebner, ACS Appl. Mater. 2, 3004 (2010).10.1021/am100871y ↗
3. H.R. Ji, J.W. Kim, Y.E. Sung, and M. Seung, Electrochem. Solid-State Lett. 7, 306 (2004).
4. H. Wu, G.Y. Zheng, N. Liu, T.J. Carney, Y. Yang, and Y. Cui, Nano Lett. 12, 904 (2012).10.1021/nl203967r ↗
5. L.W. Zhao, S.H. Han, B.K. Na, S. Okada, K. Takneo, and J.I. Yamaki, J. Power Sources 203, 78 (2012).10.1016/j.jpowsour.2011.11.068 ↗
6. T.H. Wang, Y.M. Lee, B.S. Kong, J.S. Seo, and J.W. Choi, Nano Lett. 12, 802 (2012).10.1021/nl203817r ↗
7. L.F. Cui, Y. Yang, C.M. Hsu, and Y. Cui, Nano Lett. 9, 3370 (2009).10.1021/nl901670t ↗
8. Y. He, X.Q. Yu, Y.H. Wang, H. Li, and X.J. Huang, Adv. Mater. 23, 4938 (2011).10.1002/adma.201102568 ↗
9. Z.J. Du, S.N. Ellis, R.A. Dunlap, and M.N. Obrovac, J. Electrochem. Soc. 163, 13 (2016).10.1149/2.0011602jes ↗
10. Z. Edfouf, F. Cuevas, M. Latroche, C. Georges, C. Jordy, G. Caillon, J.C. Jumas, and M.T. Sougrati, J. Power Sources 196, 4762 (2011).10.1016/j.jpowsour.2011.01.046 ↗
11. H. Wu, G. Chan, J.W. Choi, L. Ryu, and Y. Cui, Nat. Nanotechnol. 7, 310 (2012).10.1038/nnano.2012.35 ↗
12. K. Stokes, H. Geaney, M. Sheehan, D. Borsa, and K.M. Ryan, Nano Lett. 3, 31 (2019).
13. L.F. Ruffo, C.K. Chan, H. Peng, and Y. Cui, Nano Lett. 9, 491 (2009).10.1021/nl8036323 ↗
14. B. Liu, P. Soares, C. Checkles, Y. Zhao, and G.H. Yu, Nano Lett. 13, 3414 (2013).10.1021/nl401880v ↗
15. F. Xia, S.B. Kim, H. Cheng, J.M. Lee, and W.L. Park, Nano Lett. 13, 3340 (2013).10.1021/nl401629q ↗
16. L.M. Wei, C.X. Chen, Z.Y. Hou, and H. Wei, Science 6, 19 (2016).
17. B. Koo, H. Kim, Y. Cho, K.T. Lee, N.S. Choi, and J. Cho, Angew. Chem. 51, 8762 (2012).10.1002/anie.201201568 ↗
18. D.M. Piper, J.J. Travis, M. Young, S.B. Son, S.C. Kim, and K.H. Oh, Adv. Mater. 26, 1596 (2014).10.1002/adma.201304714 ↗
19. N.S. Choi, K.H. Yew, and K.Y. Lee, J. Power Sources 161, 1254 (2006).10.1016/j.jpowsour.2006.05.049 ↗
20. S. Dalavi, P. Guduru, and B.L. Lucht, J. Electrochem. Soc. 159, 642 (2012).10.1149/2.076205jes ↗
21. L.B. Chen, K. Wang, X.H. Xie, and J.Y. Xie, J. Power Sources 174, 538 (2007).10.1016/j.jpowsour.2007.06.149 ↗
22. Y. Chen, L.F. Liu, J. Xiong, T.Z. Yang, Y. Qin, and C.L. Yan, Adv. Funct. Mater. 25, 6701 (2016).10.1002/adfm.201503206 ↗
23. Z. Jian and H. Wang, Chin. J. Geochem. 22, 38 (2003).10.1007/BF02831544 ↗
24. X. Huang, D. Li, and M. Li, Powder Technol. 331, 54 (2018).10.1016/j.powtec.2018.03.006 ↗
25. I. Kovalenko, B. Zdyrko, A. Magasinski, B. Hertzberg, Z. Milicev, R. Burtovyy, and I. Luzinov, Science 334, 75 (2011).10.1126/science.1209150 ↗
26. M.T. McDowell, W.S. Lee, L. Ryu, H. Wu, W.D. Nix, J.W. Choi, and Y. Cui, Nano Lett. 11, 4018 (2011).10.1021/nl202630n ↗
27. T. Matsumoto, K. Kimura, H. Nishihara, T. Kasukabe, T. Kyotani, and H. Kobayashi, J. Alloys Compd. 720, 529 (2017).10.1016/j.jallcom.2017.05.228 ↗
28. K. Mishra, J. Zheng, R. Patel, L. Estevez, H. Jia, L. Luo, P.Z. El-Khoury, X. Li, X.D. Zhou, and J.G. Zhang, Electrochim. Acta 269, 509 (2018).10.1016/j.electacta.2018.02.166 ↗
29. H.S. Kim, W. Choi, D. Park, K. Kim, W.S. Jung, H. Choi, and J.H. Kim, J. Alloys Compd. 803, 325 (2019).10.1016/j.jallcom.2019.06.270 ↗
30. K. Kang, H.S. Lee, D.W. Han, G.S. Kim, D. Lee, G. Lee, and Y. Mook, Appl. Phys. Lett. 96, 4271 (2010).
31. G. Carbonari, F. Maroni, A. Birrozzi, R. Tossici, F. Croce, and F. Nobili, Electrochim. Acta 281, 676 (2018).10.1016/j.electacta.2018.05.094 ↗
32. Y. Liu, W. Sun, X. Lan, R. Hu, J. Cui, J. Liu, J. Liu, Y. Zhang, and M. Zhu, ACS Appl. Mater. Interfaces. 11, 38727 (2019).10.1021/acsami.9b13024 ↗
33. M.Q. Xu, W.S. Li, X.X. Zuo, J.S. Liu, and X. Xu, J. Power Sources 174, 705 (2007).10.1016/j.jpowsour.2007.06.112 ↗
34. P.R. Abel, Y.M. Lin, H. Celio, A. Heller, and C.B. Mullins, ACS Nano 6, 2506 (2012).10.1021/nn204896n ↗
35. S. Sim, P. Oh, S. Park, and J. Cho, Adv. Mater. 25, 4498 (2013).10.1002/adma.201301454 ↗