journal article·2019-07

Synthesis of Ag3Sn Submicrometer Particles via an Adapted Polyol Process in View of Their Use As Die-Attach Material in Power Modules

Pauline Canaud, Roland Mahayri, Frédéric Schoenstein, Eric Gautron, Ky-Lim Tan, Thierry Chauveau, Jean-Michel Morelle, Fadila Maroteaux, Noureddine Jouini

Journal of Electronic Materials· Volume 48· Issue 7
Publisher page

Abstract

Intermetallic Ag3Sn was synthesized in the form of submicrometer particles through an adapted two-step polyol process. The precursor salts were tin (II) chloride (SnCl2) and silver nitrate (AgNO3), while the polyol used was ethylene glycol (EG). Sodium hydroxide (NaOH) and sodium borohydride (NaBH4) were selected as alkaline and reducing agents, respectively, and polyvinylpyrrolidone (PVP) was used to prevent the particles from coalescing. In the first step, Ag nanoparticles were obtained when silver nitrate and PVP, dissolved in polyol, were heated at 160°C. The as-obtained Ag nanoparticles served as seeds for the nucleation and growth of the Sn species obtained in the second step. In this second step, the SnCl2 salt, combined with NaOH and NaBH4 as a strong reducing agent, was added to the polyol solution. Stannous ions, which were likely adsorbed at the Ag nanoparticle surface, were reduced to tin metal using the strong reducing power of NaBH4. Then, the Sn atoms diffused inside the Ag nanoparticles producing Ag3Sn submicrometer particles with diameter in the range of 100–200 nm. The submicrometer size of the Ag3Sn particles, as well as its high melting point at approximately 485°C makes this compound a good candidate for a lead-free die-attach material in power module devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies · Electrical Contact Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. T. Lindhqvist and R. Lifset, J. Ind. Ecol. 7, 3 (2008).10.1162/108819803322564299 ↗
2. J.B. Lee, H.Y. Hwang, and M.-W. Rhee, J. Electron. Mater. 44, 435 (2015).10.1007/s11664-014-3373-1 ↗
3. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
4. K. Suganuma, Curr. Opin. Solid State Mater. Sci. 5, 55 (2001).10.1016/S1359-0286(00)00036-X ↗
5. Z. Zhang, Thesis, Virginia Polytechnic Institute (2005).
6. J. Horo, P.-G. Harne, B.-B. Nayak, and S. Vitta, Mater. Sci. Eng. B 107, 53 (2004).10.1016/j.mseb.2003.10.012 ↗
7. Y. Ocak, S. Aksöz, N. Maraşlı, and K. Keşlioğlu, Intermetallics 18, 2250 (2010).10.1016/j.intermet.2010.07.019 ↗
8. F. Fiévet, J.P. Lagier, and M. Figlarz, MRS Bull. 14, 29 (1989).10.1557/S0883769400060930 ↗
9. F. Fiévet, F. Fiévet-Vincent, J.-P. Lagier, B. Dumont, and F. Figlarz, J. Mater. Chem. 3, 627 (1993).10.1039/jm9930300627 ↗
10. L.F. Bobadilla, C. Garcia, J.J. Delgado, O. Sanz, F. Romero-Sarria, M.A. Centeno, and J.A. Odriozola, J. Magn. Magn. Mater. 324, 4011 (2012).10.1016/j.jmmm.2012.07.005 ↗
11. L. Poul, S. Ammar, N. Jouini, F. Fiévet, and F. Villain, J. Sol Gel. Sci. Technol. 26, 261 (2003).10.1023/A:1020763402390 ↗
12. P. Toneguzzo, G. Viau, O. Acher, F. Guillet, F. Bruneton, F. Fiévet-Vinvent, and F. Fiévet, J. Mater. Sci. 35, 3767 (2000).10.1023/A:1004864927169 ↗
13. Y. Sun and Y. Xia, Adv. Mater. 14, 833 (2002).10.1002/1521-4095(20020605)14:11<833::AID-ADMA833>3.0.CO;2-K ↗
14. S.-S. Chee and J.-H. Lee, Trans. Nonferrous Met. Soc. China 22, s707 (2012).10.1016/S1003-6326(12)61791-9 ↗
15. J. Yan, A. Wu, J. Ren, A. Hu, L. Liu, and Y.N. Zhou, J. Phys. Conf. Ser. 379, 012024 (2012).10.1088/1742-6596/379/1/012024 ↗
16. http://www.crystalimpact.com/match/ .
17. L. Lutterotti, M. Bortolotti, G. Ischia, I. Lonardelli, and H.R. Wenk, Z. Kristallogr. Suppl. 26, 125 (2007).10.1524/zksu.2007.2007.suppl_26.125 ↗
18. L.B. McCusker, R.B. Von Dreele, D.E. Cox, D. Louër, and P. Scardi, J. Appl. Cryst. 32, 36 (1999).10.1107/S0021889898009856 ↗
19. P.-Y. Silvert, R. Herrera-Urbina, N. Duvauchelle, V. Vijayakrishnan, and K.T. Elhsissen, J. Mater. Chem. 6, 573 (1996).10.1039/JM9960600573 ↗
20. B. Wiley, Y. Sun, B. Mayers, and Y. Xia, Chem. Eur. J. 11, 454 (2005).10.1002/chem.200400927 ↗
21. K. Sim and J. Lee, J. Alloys Compd. 590, 140 (2014).10.1016/j.jallcom.2013.12.101 ↗
22. P.Y. Chevalier, Thermochim. Acta 136, 45 (1988).10.1016/0040-6031(88)87426-4 ↗
23. M. Ellner and E.J. Mittemeijer, Z. Kristallogr. 218, 675 (2003).10.1524/zkri.218.10.675.20764 ↗
24. P.J. Rossi, N. Zotov, and E.J. Mittemeijer, Z. Kristallogr. 231, 1 (2016).10.1515/zkri-2015-1867 ↗
25. M. Wachtler, M. Winter, and J.-O. Besenhard, J. Power Sources 105, 151 (2002).10.1016/S0378-7753(01)00934-X ↗
26. L. Poul, S. Ammar, N. Jouini, F. Fiévet, and F. Villain, Solid State Sci. 3, 31 (2001).10.1016/S1293-2558(00)01129-8 ↗
27. A.H. Barry, G. Dirras, F. Schoenstein, F. Tétard, and N. Jouini, Mater. Charact. 91, 26 (2014).10.1016/j.matchar.2014.02.004 ↗
28. Y.H. Jo, I. Jung, N.R. Kim, and H.M. Lee, J. Nanopart. Res. 14, 782 (2012).10.1007/s11051-012-0782-z ↗
29. F. Bonet, C. Guéry, D. Guyomard, R. Herrera-Urbina, K. Tekaia-Elhsissen, and J.-M. Tarascon, J. Inorg. Mater. 1, 47 (1999).10.1016/S1463-0176(99)00007-1 ↗
30. D. Larcher and R. Patrice, J. Solid State Chem. 154, 405 (2000).10.1006/jssc.2000.8802 ↗
31. M. Tsuji, R. Matsuo, P. Jiang, N. Miyamae, D. Ueyama, M. Nishio, S. Hikino, H. Kumagae, K.S.N. Kamarudin, and X.-L. Tang, Cryst. Growth Des. 8, 2528 (2008).10.1021/cg800162t ↗
32. V.L. Nguyen, M. Ohtaki, T. Matsubara, M.T. Cao, and M. Nogami, J. Phys. Chem. C 116, 12265 (2012).10.1021/jp303117y ↗
33. Z.N. Urgessa, K. Talla, S.R. Dobson, O.S. Oluwafemi, E.J. Olivier, J.H. Neethling, and J.R. Botha, Mater. Lett. 108, 280 (2013).10.1016/j.matlet.2013.07.025 ↗
34. Y. Ju, T. Tasaka, H. Yamauchi, and T. Nakagawa, Microsyst. Technol. 21, 1849 (2015).10.1007/s00542-014-2397-z ↗
35. A. Lis, M.S. Park, R. Arroyave, and C. Leinenbach, J. Alloys Compd. 617, 763 (2014).10.1016/j.jallcom.2014.08.082 ↗
36. L. Poul, N. Jouini, F. Fievet, and P. Herson, Z. Kristallogr. 213, 416 (1998).10.1524/zkri.1998.213.7-8.416 ↗
37. N. Chakroune, G. Viau, S. Ammar, N. Jouini, P. Gredin, M.-J. Vaulay, and F. Fiévet, New J. Chem. 29, 355 (2005).10.1039/B411117F ↗