The Properties of Bi2Te3-Cu Joints Obtained by SPS/FAST Method
Source abstract
Abstract
One of the most important challenges connected with the production of thermoelectric modules and their parts is the development of an appropriate joining technology. The produced junctions must be characterised not only by high mechanical strength and good adhesion but also by high electrical conductivity, high heat conductivity and, due to working conditions, by a long-term chemical and temperature stability. This paper presents the results of the investigation of a Bi 2 Te 3 /copper junction obtained using lead-free solders. We analyse and discuss junction properties and quality. To produce this connection via resistance soldering under pressure, a spark slasma sintering (SPS/FAST) apparatus was used. The properties of the samples (electrical conductivity and Seebeck coefficient) have been characterized and presented. The microstructure investigations and analysis of the element distribution are also presented.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Electronic Packaging and Soldering Technologies · Physics of Superconductivity and Magnetism
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. D.M. Rowe, Introduction. CRC Handbook of Thermoelectrics (Boca Raton: CRC Press, 1995).10.1201/9781420049718 ↗
2. R. Fitriani, B.D. Ovik, M.C. Long, M. Barma, M.F.M. Riaz, S.M. Sabri, and R.Saidur Said, Renew. Sustain. Energy Rev. 64, 635 (2016).10.1016/j.rser.2016.06.035 ↗
3. K.T. Wojciechowski, R. Zybala, J. Leszczynski, P. Nieroda, M. Schmidt, J. Merkisz, P. Lijewski, and P. Fuc, AIP Conf. Proc. 1449, 501 (2012).10.1063/1.4731603 ↗
4. K.T. Wojciechowski, M. Schmidt, R. Zybala, J. Merkisz, P. Fuć, and P. Lijewski, J. Electron. Mater. 39, 2034 (2010).10.1007/s11664-009-1010-1 ↗
5. R. Cataldo, Outer Solar System (Cham: Springer, 2018), pp. 767–790.10.1007/978-3-319-73845-1_16 ↗
6. S. Lineykin and S. Ben-Yaakov, IEEE Trans. Ind. Appl. 43, 505 (2007).10.1109/TIA.2006.889813 ↗
7. R. Zybała, M. Schmidt, K. Kaszyca, ł. Ciupiński, M.J. Kruszewski, and K. Pietrzak, J. Electron. Mater. 45, 5223 (2016).10.1007/s11664-016-4712-1 ↗
8. W.C. Lin, Y.S. Li, and A.T. Wu, J. Electron. Mater. 47, 148 (2018).10.1007/s11664-017-5906-x ↗
9. M. Barlak, J. Piekoszewski, J. Stanislawski, Z. Werner, K. Borkowska, M. Chmielewski, B. Sartowska, M. Miskiewicz, W. Starosta, L. Walis, and J. Jagielski, Fusion Eng. Des. 82, 2524 (2007).10.1016/j.fusengdes.2007.08.010 ↗
10. W. Olesińska, D. Kaliński, M. Chmielewski, R. Diduszko, and W.K. Włosiński, J. Mater. Sci.: Mater. Electron. 17, 781 (2006).
11. H.J. Goldsmid, Materials (Basel) 7, 2577 (2014).10.3390/ma7042577 ↗
12. C. Jiang, X. Fan, Z. Rong, C. Zhang, G. Li, B. Feng, J. Hu, and Q. Xiang, J. Electron. Mater. 46, 1363 (2017).10.1007/s11664-016-5135-8 ↗
13. R. Zybała, K. Mars, A. Mikuła, J. Bogusławski, G. Soboń, J. Sotor, M. Schmidt, K. Kaszyca, M. Chmielewski, L. Ciupiński, and K. Pietrzak, Arch. Metall. Mater. 62, 1067 (2017).10.1515/amm-2017-0155 ↗
14. R. Zybala and K.T. Wojciechowski, AIP Conf. Proc. 517, 393 (2012).10.1063/1.4731579 ↗
15. D.R. Campbell and C. Ivers, Semiconductor Contact Technology, 2nd ed. (Routledge: Taylor & Francis, 2006).
16. S.J. Raab, R. Guschlbauer, M.A. Lodes, and C. Körner, Adv. Eng. Mater. 18, 1661 (2016).10.1002/adem.201600078 ↗
17. W.P. Lin, D.E. Wesolowski, and C.C. Lee, J. Mater. Sci.: Mater. Electron. 22, 1313 (2011).
18. W.C. Lin, Y.S. Li, and A.T. Wu, J. Electron. Mater. 47, 148 (2018).10.1007/s11664-017-5906-x ↗
19. K. Kaszyca, M. Schmidt, M. Chmielewski, K. Pietrzak, and R. Zybala, Mater. Today Proc. 5, 10277 (2018).10.1016/j.matpr.2017.12.274 ↗
20. K. Kaszyca, M. Schmidt, M. Chmielewski, K. Pietrzak, and R. Zybala, Mater. Today Proc. 5, 10277 (2018).10.1016/j.matpr.2017.12.274 ↗
21. M.J. Kruszewski, R. Zybała, M. Ciupiński, B. Chmielewski, A. Adamczyk-Cieślak, M.Rajska Michalski, and K.J. Kurzydłowski, J. Electron. Mater. 45, 1369 (2016).10.1007/s11664-015-4037-5 ↗
22. W. Sade, R.T. Proença, T.D.O. de Moura, and J.R.T. Branco, ISRN Mater. Sci. 2011, 1 (2011).10.5402/2011/693046 ↗
23. S. Li, J. Pei, D. Liu, L. Bao, J.F. Li, H. Wu, and L. Li, Energy 113, 35 (2016).10.1016/j.energy.2016.07.034 ↗