journal article·2019-05

Highly Efficient Electrocatalyst of Pt Electrodeposited on Modified Carbon Substrate with Ni/ZnO for Methanol Oxidation Reaction

Rasol Abdullah Mirzaie, Azam Anaraki Firooz, Maliheh Bakhtiari

Journal of Electronic Materials· Volume 48· Issue 5
Publisher page

Abstract

Ni/ZnO with different molar ratios were synthesized by a simple hydrothermal method and used as substrate in the reaction layer of gas diffusion electrodes for a platinum electrodeposition electrocatalyst. Cyclic voltammetry technique was used for platinum electrodeposition on prepared substrate. The physicochemical characterization of the optimized electrocatalyst was done by scanning electron microscopy, x-ray diffraction, and energy-dispersive x-ray. The electrochemical characterization of the platinum electrodeposited on modified carbon substrate with Ni/ZnO particles were studied at a range of Ni concentration in substrate of electrocatalyst by using cyclic voltammetry, linear sweep voltammetry, and electrochemical impedance spectroscopy. The results show that the Ni has a significant effect on performance of prepared electrocatalyst for methanol oxidation reactions (MOR). The presence of 50 wt.% Ni into ZnO in modified carbon substrate shows the good distribution of platinum nanoparticles on the substrate, which generates more active sites for MOR. In addition, the electrochemical surface area of this electrocatalyst reached 105.6 m2 g−1, which was higher than that of commercial Pt/C electrocatalyst (32.45 m2 g−1). The impact of these factors leads to high catalytic activity for MOR. Since methanol can be used as fuel in future portable fuel cells, the synthesized electrocatalysts can provide good conditions for methanol oxidation reactions in these systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. X. Lu, W. Wang, Z. Deng, H. Zhu, S. Wei, S.-P. Ng, W. Guo, and C.-M.L. Wu, RSC Adv. 6, 1729 (2016).10.1039/C5RA21793H ↗
2. H. Kunitomo, H. Ishitobi, and N. Nakagawa, J. Power Sour. 297, 400 (2015).10.1016/j.jpowsour.2015.07.002 ↗
3. Y. Cheng, P.K. Shen, and S.P. Jiang, Int. J. Hydrog. Energy 41, 1935 (2016).10.1016/j.ijhydene.2015.10.121 ↗
4. A.A. Siller-Ceniceros, M.E. Sánchez-Castro, D. Morales-Acosta, J.R. Torres-Lubian, E. Martínez, and F.J. Rodríguez-Varela, Appl. Catal B: Environ. 209, 455 (2017).10.1016/j.apcatb.2017.03.023 ↗
5. T. Saida, N. Ogiwara, Y. Takasu, and W. Sugimoto, J. Phys. Chem. C 114, 13390 (2010).10.1021/jp103049x ↗
6. R. Chang, L. Zheng, C. Wang, D. Yang, G. Zhang, and S. Sun, Appl. Catal. B: Environ. 211, 205 (2017).10.1016/j.apcatb.2017.04.040 ↗
7. X. Li, H. Wang, H. Yu, Z. Liu, H. Wang, and F. Peng, Electrochim. Acta 185, 178 (2015).10.1016/j.electacta.2015.10.128 ↗
8. J. Hosseini, M. Abdolmaleki, H.R. Pouretedal, and M.H. Keshavarz, Chin. J. Catal. 36, 1029 (2015).10.1016/S1872-2067(15)60841-5 ↗
9. X. Chen, C. Si, Y. Gao, J. Frenzel, J. Sun, G. Eggeler, and Z. Zhang, J. Power Sour. 273, 324 (2015).10.1016/j.jpowsour.2014.09.076 ↗
10. J. Ju, X. Chen, Y. Shi, D. Wu, and P. Hua, J. Ind. Eng. Chem. 20, 1223 (2014).10.1016/j.jiec.2013.07.045 ↗
11. O. Akyıldırım, H. Yüksek, H. Saral, İ. Ermiş, T. Eren, and M.L. Yola, J. Mater. Sci.: Mater. Electron. 27, 8559 (2016).
12. S.N. Ab Malek and Y. Mohd, Int. J. Electrochem. Sci. 12, 1561 (2017).10.20964/2017.02.77 ↗
13. A.M. El-Sawy, H. Tasnim, A.G. Meguerdichian, J. Jin, J.P. Dubrosky, and S.L. Suib, Inorg. Chem. 57, 9977 (2018).10.1021/acs.inorgchem.8b01153 ↗
14. J. Pfrommer, M. Lublow, A. Azarpira, C. Gobel, M. Lucke, A. Steigert, M. Pogrzeba, P.W. Menezes, A. Fischer, T. Schedel-Niedrig, and M. Driess, Angew. Chem. Int. Ed. 53, 5183 (2014).10.1002/anie.201400243 ↗
15. J. Liu, B. Chen, Z. Ni, Y. Deng, X. Han, W. Hu, and C. Zhong, Chem. Electro. Chem. 3, 537 (2016).
16. M. Nischk, P. Mazierski, Z. Wei, K. Siuzdak, N.A. Kouame, E. Kowalska, H. Remita, and A. Zaleska-Medynsk, Appl. Surf. Sci. 387, 89 (2016).10.1016/j.apsusc.2016.06.066 ↗
17. T. Takashima, T. Sano, and H. Irie, Electrochemistry 84, 784 (2016).10.5796/electrochemistry.84.784 ↗
18. K. Zhang, W. Yang, C. Ma, Y. Wang, C. Sun, Y. Chen, P. Duchesne, J. Zhou, J. Wang, Y. Hu, M.N. Banis, P. Zhang, F. Li, J. Li, and L. Chen, NPG Asia Mater. 7, e153 (2015).10.1038/am.2014.122 ↗
19. T.-Y. Yung, J.-Y. Lee, and L.-K. Liu, Sci. Technol. Adv. Mater. 14, 03500 (2013).10.1088/1468-6996/14/3/035001 ↗
20. H. Wang, X. Wang, J. Zheng, F. Peng, and H. Yu, Chin. J. Catal. 35, 1687 (2014).10.1016/S1872-2067(14)60104-2 ↗
21. C.S. Sharma, A.S.K. Sinha, and R.N. Singh, Int. J. Hydrog. Energy 39, 20151 (2014).10.1016/j.ijhydene.2014.10.019 ↗
22. S. Trasatti and O.A. Petrii, J. Electroanal. Chem. 327, 353 (1992).10.1016/0022-0728(92)80162-W ↗
23. P.K. Shen, C. Xu, R. Zeng, and Y. Liu, Electrochem. Solid-State Lett. 9, A39 (2006).10.1149/1.2139975 ↗
24. A. Banisharif, S. Hakim Elahi, A. Anaraki Firooz, A.A. Khodadadi, and Y. Mortazavi, Int. J. Nanosci. Nanotechnol. 9, 193 (2013).