The Synthesis and Characterization of Cerium Carbonate Hydroxide Nanorods as an Anode for Lithium-Ion Batteries
Source abstract
Abstract
Nanorods cerium carbonate hydroxide, CeCO3OH, was synthesized through a low-temperature reaction route. The data of x-ray diffraction and scanning electron microscopy revealed that the as-prepared samples were CeCO3OH nanorods. The diameters of the nanorods were in the range of 50–100 nm, and the lengths were around 300–500 nm. As an anode of a lithium ion battery, the charge–discharge capacity, cyclability and lithium-ion diffusion kinetics of CeCO3OH nanorods were investigated. The calculated lithium ion diffusion coefficient was 1.36 × 10−19 cm2 s−1. The initial discharge capacity was about 621.6 mA h g−1 at 0.2 mA cm−2 in 0.05–2.5 V. After 100 cycles, the discharge capacity stabilized at about 362 mA h g−1 and the Coulombic efficiency was nearly 98%, indicating the potential application in anodes of lithium-ion batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Q. Xu, J. Li, Y. Yin, Y. Kong, Y. Guo, and L. Wan, Chem. Asia. J. 11, 1205 (2016).10.1002/asia.201600067 ↗
2. G. Huang, Q. Li, D. Yin, and L. Wang, Adv. Funct. Mater. 27, 1604941 (2017).10.1002/adfm.201604941 ↗
3. D.J. Lee, S. Yu, H.S. Lee, A. Jin, J. Lee, J.E. Lee, Y. Sung, and T. Hyeon, J. Mater. Chem. A 5, 8744 (2017).10.1039/C7TA01028A ↗
4. H.W. Liu and H.F. Liu, J. Alloys Compd. 681, 342 (2016).10.1016/j.jallcom.2016.04.207 ↗
5. X. Wu, H. Niu, S. Fu, J. Song, C. Mao, S. Zhang, D. Zhang, and C. Chen, J. Mater. Chem. A 2, 6790 (2014).10.1039/c3ta15420c ↗
6. F. Hrizi, H. Dhaouadi, and F. Touati, Ceram. Int. 40, 25 (2014).10.1016/j.ceramint.2013.05.098 ↗
7. S. Yang, Y. Gong, Z. Liu, L. Zhan, D.P. Hashim, L. Ma, R. Vajtai, and P.M. Ajayan, Nano Lett. 13, 1596 (2013).10.1021/nl400001u ↗
8. Y.-M. Chiang, E.B. Lavik, I. Kosacki, H.L. Tuller, and J.Y. Ying, Appl. Phys. Lett. 69, 185 (1996).10.1063/1.117366 ↗
9. H.W. Liu and H.F. Liu, Mater. Lett. 168, 80 (2016).10.1016/j.matlet.2016.01.029 ↗
10. G. Qin, Q. Ma, and C. Wang, Electrochim. Acta 115, 407 (2014).10.1016/j.electacta.2013.10.177 ↗
11. T. Li, S.B. Ni, X.H. Lv, X.L. Yang, and S. Duan, J. Alloys Compd. 553, 167 (2013).10.1016/j.jallcom.2012.11.136 ↗
12. W. Han, K. Yang, D. Li, Z. Zhang, J. Ma, S. Ni, and X. Yang, Mater. Lett. 164, 148 (2016).10.1016/j.matlet.2015.10.102 ↗
13. H. Pang and C. Chen, RSC Adv. 4, 14872 (2014).10.1039/C4RA00632A ↗