journal article·2014-01

Characteristics of Plasma-Treated Amorphous Ta-Si-C Film as a Diffusion Barrier for Copper Metallization

Jau-Shiung Fang, Wu-Jia Su, Meng-Shuo Huang, Chin-Fu Chiu, Tsung-Shune Chin

Journal of Electronic Materials· Volume 43· Issue 1
Publisher page

Abstract

Ta-Si-C film was prepared by magnetron sputtering, and the thermal stability of the plasma-treated film as a copper diffusion barrier was evaluated. The barrier properties and failure behaviors of the studied films were elucidated using a four-point probe, x-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The as-deposited Ta-Si-C film had an amorphous structure, and the structure remained stable at an elevated temperature, allowing the film to be adopted as a barrier to inhibit Cu diffusion. The Cu/Ta26Si41C32/Si stacked structure had a failure temperature of 750°C/1 min when the 5-nm-thick Ta26Si41C32 film was treated by exposure to Ar/H2 plasma mixture, while the stacked film failed at 800°C/1 min when treated by exposure to Ar/N2 plasma mixture. Using the Ar/N2 plasma treatment favorably enhanced the thermal stability of the Ta26Si41C32 thin film as a barrier for Cu interconnections. When the Ta-Si-C film thickness was further reduced to 2 nm, the film retained the barrier effect at 650°C, 700°C, and 750°C for Ta34Si47C18, Ta30Si44C25, and Ta26Si41C32 compositions, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Aluminum Alloys Composites Properties · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. C.W. Park and R.W. Vook, Appl. Phys. Lett. 59, 175 (1991).10.1063/1.106011 ↗
2. M.A. Nicolet, Thin Solid Films 52, 415 (1978).10.1016/0040-6090(78)90184-0 ↗
3. S.C. Len, R.E. Hurley, D.W. McNeill, B.M. Armstrong, and H.S. Gamble, Solid State Electron. 43, 1045 (1999).10.1016/S0038-1101(99)00022-2 ↗
4. J.S. Fang, J.H. Lin, B.Y. Chen, and T.S. Chin, J. Electrochem. Soc. 158, H97 (2011).10.1149/1.3518411 ↗
5. K.C. Hsu, D.C. Perng, J.B. Yeh, and Y.C. Wang, Appl. Surf. Sci. 258, 7225 (2012).10.1016/j.apsusc.2012.04.046 ↗
6. A.Z. Moshfegh and O. Akhavan, Mater. Sci. Semicond. Process. 6, 165 (2003).10.1016/S1369-8001(03)00059-3 ↗
7. J.C. Tsao, C.P. Liu, Y.L. Wang, Y.S. Wang, and K.W. Chen, J. Phys. Chem. Solids 69, 501 (2008).10.1016/j.jpcs.2007.11.022 ↗
8. T.Y. Lin, H.Y. Cheng, T.S. Chin, C.F. Chiu, and J.S. Fang, Appl. Phys. Lett. 91, 152908 (2007).10.1063/1.2799245 ↗
9. J.C. Tsao, C.P. Liu, Y.L. Wang, K.W. Chen, and K.Y. Lo, J. Phys. Chem. Solids 69, 561 (2008).10.1016/j.jpcs.2007.07.072 ↗
10. C.C. Huang, Y.L. Wang, S.C. Chang, G.J. Hwang, and J.L. Huang, Thin Solid Films 498, 286 (2006).10.1016/j.tsf.2005.07.128 ↗
11. S.Y. Kim, K. Hong, K. Kim, H.K. Yu, W.K. Kim, and J.L. Lee, J. Appl. Phys. 103, 076101 (2008).10.1063/1.2874495 ↗
12. M. Stavrev, D. Fischer, A. Preub, C. Wenzel, and N. Mattern, Microelectron. Eng. 33, 269 (1997).10.1016/S0167-9317(96)00054-8 ↗
13. K.H. Min, K.C. Chun, and K.B. Kim, J. Vac. Sci. Technol. B14, 3263 (1996).10.1116/1.588818 ↗
14. K. Radhakrishana, N.G. Ing, and R. Gopalakrishnan, Mater. Sci. Eng. 57, 224 (1999).10.1016/S0921-5107(98)00417-6 ↗
15. W.F. Wu, K.L. Ou, C.P. Chou, and C.C. Wu, J. Electrochem. Soc. 150, G83 (2003).10.1149/1.1531974 ↗
16. J.S. Fang, C.F. Chiu, J.H. Lin, T.Y. Lin, and T.S. Chin, J. Electrochem. Soc. 156, H147 (2009).10.1149/1.3043440 ↗