journal article·2004-08

Degradation of electroless Ni(P) under-bump metallization in Sn3.5Ag and Sn37Pb solders during high-temperature storage

W. -M. Chen, P. Mccloskey, P. Byrne, P. Cheasty, G. Duffy, J. F. Rohan, J. Boardman, A. Mulcahy, S. C. O’Mathuna

Journal of Electronic Materials· Volume 33· Issue 8
Publisher page

Abstract

The interfacial reaction between electroless Ni(P) under-bump metallization (UBM) and solders is studied. A P-rich layer forms in the UBM along the solder side after reflow and thermal aging. Crack formation inside the P-rich layer can sometimes penetrate throughout the entire UBM layer structure. The Ni(P) UBM degradation occurs earlier in the Sn3.5Ag solder than in Sn37Pb because of its higher reflow temperature. Despite the formation of a P-rich layer and cracks inside the UBM, it still keeps its original function within the high-temperature storage period in this study. Explanations for the formation of the P-rich layer and cracks in the UBM are outlined along with explanations for the Ni(P) UBM degradation process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A. Tsui, M. Kasem, W. McDaniel, and E. Lambka, PCIM Power Electron. Syst. 25, 20 (1999).
2. R.R. Tummala and E.J. Rymaszewski, Microelectronics Packaging Handbook (New York: Van Nostrand Reinhold, 1989), p. v (preface).
3. S.C. O’Mathuna, P. Byrne, G. Duffy, W. Chen, M. Ludwig, T. O’Donnell, and P. McCloskey, IECON Proc. 4, 3250 (2002).
4. R. Aschenbrenner, A. Ostmann, U. Beutler, J. Simon, and H. Reichl, IEEE Trans. Comp. Packaging Technol., Part B 18, 334 (1995).10.1109/96.386270 ↗
5. D.A. Hutt, C. Liu, P.P. Conway, D.C. Whalley, and S.H. Mannan, IEEE Trans. Comp. Packaging Technol. 25, 87 (2002).10.1109/6144.991180 ↗
6. F. Zhang, M. Li, B. Balakrisnan, and W.T. Chen, J. Electron. Mater. 31, 1256 (2002).10.1007/s11664-002-0018-6 ↗
7. K.S. Kim, C.H. Yu, N.H. Kim, N.K. Kim, H.J. Chang, and E.G. Chang, Microelectron. Reliab. 43, 757 (2003) and references therein.10.1016/S0026-2714(03)00060-X ↗
8. S.M. Chang, R.H. Uang, D.C. Liou, H.T. Hu, K.C. Chen, Y.F. Chen, and Y.H. Chen, Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 2003), pp. 1209–1214.
9. S.Y. Jang and K.W. Paik, Advances in Electronic Materials and Packaging 2001 (Piscataway, NJ: IEEE, 2001), pp. 121–128.
10. D.A. Hutt, C. Liu, P.P. Conway, D.C. Whalley, and S.H. Mannan, IEEE Trans. Comp. Packaging Technol. 25, 98 (2002).10.1109/6144.991181 ↗
11. J.F. Rohan and G. O’Riordan, Microelectron. Eng. 65, 77 (2003).10.1016/S0167-9317(02)00730-X ↗
12. M.O. Alam, Y.C. Chan, and K.C. Hung, Microelectron. Reliab. 42, 1065 (2002) and references therein.10.1016/S0026-2714(02)00068-9 ↗
13. J.W. Jang, P.G. Kim, K.N. Tu, D.R. Frear, and P. Thompson, J. Appl. Phys. 85, 8456 (1999) and references therein.10.1063/1.370627 ↗
14. National Institute of Standards and Technology, “Database for Solder Properties with Emphasis on New Lead-Free Solders Release 4.0” Table 1.19 11 February 2002. http://www.boulder.nist.gov/div853/lead%20free/part1.html
15. C.Y. Lee and K.L. Lin, Thin Solid Films, 249, 201 (1994) and references therein.10.1016/0040-6090(94)90761-7 ↗
16. Y.-D. Jeon, K.-W. Paik, K.-S. Bok, W.-S. Choi, and C.-L. Cho, Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 1326–1332 and references therein.
17. K.C. Hung, Y.C. Chan, C.W. Tang, and H.C. Ong, J. Mater. Res. 15, 2534 (2000).10.1557/JMR.2000.0363 ↗
18. M.O. Alam, Y.C. Chan, and K.C. Hung, J. Electron. Mater. 31, 1117 (2002).10.1007/s11664-002-0051-5 ↗
19. K. Zeng and K.N. Tu, Mater. Sci. Eng. Rep. 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
20. H. Schmalgried, Solid State Reactions (New York: Academic Press, Inc., 1974), pp. 90–92.