journal article·2023-02Open access

Ag-(In-Bi) Solid–Liquid Interdiffusion Bonding

Stéphane Léonard Kuziora, Hoang-Vu Nguyen, Knut Eilif Aasmundtveit

Journal of Electronic Materials· Volume 52· Issue 2

Abstract

Abstract Solid–liquid interdiffusion is a metallurgical bonding technique, suitable for assembly of temperature sensitive materials. We identify Ag-(In-Bi) as meeting the low-temperature bonding requirements, theoretically as low as 73°C. This work focuses on understanding the bonding process and the interactions between the metal elements. Ag-(In-Bi) was bonded using an eutectic In-Bi foil at both 150°C and 180°C. The resulting bondlines were layered as Ag/Ag9In4/AgIn2/In-Bi compounds/AgIn2/Ag9In4/Ag. At some sections the phase growth of AgIn2 or Ag9In4 bridged the bond. Because of this bridging of γ-Ag9In4, temperature stability of ~480–570°C, is readily possible. The majority of the remaining Bi was located within large pockets near the middle of the bondline, and the minority as precipitates in protruding arms. Mechanisms for these Bi precipitates and intermetallic arm growth are discussed, and the evidence indicates that dissolution and surface planarity play important roles in their formation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. L. Bernstein and H. Bartholomew, Applications of solid-liquid lnterdiffusion (SLID) bonding in integrated-circuit fabrication. Trans. Metall. Soc. AIME 236, 405–412 (1966).
2. K.E. Aasmundtveit, T. Eggen, T. Manh, and H.V. Nguyen, In–Bi low-temperature SLID bonding for piezoelectric materials. Solder Surf. Mount. Technol. 30, 100–105 (2018).10.1108/SSMT-10-2017-0034 ↗
3. P.K. Bolstad, D. Le-Anh, L. Hoff, and T. Manh, Intermetallic bonding as an alternative to polymeric adhesives in ultrasound transducers. IEEE Int. Ultrason. Symp. 2019, 1765–1768 (2019).
4. J. Wojewoda-Budka and P. Zieba, Formation and growth of intermetallic phases in diffusion soldered Cu/In–Bi/Cu interconnections. J. Alloys Compd. 476, 164–171 (2009).10.1016/j.jallcom.2008.09.045 ↗
5. J. Roman: An investigation of low temperature transient liquid phase bonding of silver, gold, and copper. (1991)
6. M.L. Zheludkevich, A.G. Gusakov, A.G. Voropaev, A.A. Vecher, E.N. Kozyrski, and S.A. Raspopov, Oxidation of silver by atomic oxygen. Oxid. Met. 61, 39–48 (2004).10.1023/B:OXID.0000016275.96500.24 ↗
7. G. Ross, P. Malmberg, V. Vuorinen, and M. Paulasto-Kröckel, The role of ultrafine crystalline behavior and trace impurities in copper on intermetallic void formation. ACS Appl. Electron. Mater. 1, 88–95 (2018).10.1021/acsaelm.8b00029 ↗
8. C. Muzzillo and T. Anderson, Thermodynamic assessment of Ag–Cu–In. J. Mater. Sci. 53, 6893–910 (2018).10.1007/s10853-018-1999-8 ↗
9. M. Gaune-Escard, Thermodynamics of the Ag–Bi–In system (with 0, xAg,0.5). J. Alloys Compd. 265, 160–9 (1998).
10. A. Sabbar, A. Zrineh, J. Dubès, M. Gambino, J. Bros, and G. Borzone, The Ag-Bi-In system: Enthalpy of formation. Thermochim. Acta 395, 47–58 (2002).10.1016/S0040-6031(02)00178-8 ↗
11. E.T.B. Massalski, H. Okamoto, P. Subramanian, and L. Kacprzak, Binary alloy phase diagrams, 2nd ed., (UK: ASM International, 1992).
12. W. Rasband: “ImageJ.” [Online]. Available: https://imagej.nih.gov/ij/
13. W. M. Haynes: CRC Handbook of chemistry and physics, 97th Edition. CRC Press LLC Taylor & Francis Group [distributor], Boca Raton; Florence, (2016)
14. R.I. Made, C.L. Gan, L.L. Yan, A. Yu, S.W. Yoon, J.H. Lau, and C. Lee, Study of low-temperature thermocompression bonding in Ag-In solder for packaging applications. J. Electron. Mater. 38, 365–371 (2009).10.1007/s11664-008-0555-8 ↗
15. Y. Marcus, On the compressibility of liquid metals. J. Chem. Thermodyn. 109, 11–5 (2016).10.1016/j.jct.2016.07.027 ↗
16. G.H. Otto, Density of indium–bismuth alloys. J. Less-Common Met. 45, 163–71 (1976).10.1016/0022-5088(76)90208-3 ↗
17. COMSOL Multiphysics® v. 6.0. COMSOL AB, Stockholm, Sweden
18. V. Ćosović, D. Minić, M. Premović, D. Manasijević, A. Đorđević, D. Milisavljević, and A. Marković, The influence of chemical composition on microstructure, hardness and electrical conductivity of Ag-Bi-In alloys at 100°C. Metall. Mater. Eng. 23, 65–82 (2017).10.30544/265 ↗
19. “Struers ABOUT GRINDING AND POLISHING,” 2021. [Online]. Available: https://www.struers.com/en/Knowledge/Grinding-and-polishing#grindingpolishingtroubleshooting. [Accessed: 17-Mar-2022].
20. X.J. Liu, T. Yamaki, I. Ohnuma, R. Kainuma, and K. Ishida, Thermodynamic calculations of phase equilibria, surface tension and viscosity in the In-Ag-X (X=Bi, Sb) system. Mater. Trans. 45, 637–645 (2004).10.2320/matertrans.45.637 ↗
21. S.-J.L. Kang, Sintering: Densification, grain growth & microstructure (Elsevier, 2005), pp. 117–135. https://doi.org/10.1016/B978-075066385-4/50009-1.10.1016/B978-075066385-4/50009-1 ↗
22. H.F. Zou, Q.K. Zhang, and Z.F. Zhang, Interfacial microstructure and mechanical properties of SnBi/Cu joints by alloying Cu substrate. Mater. Sci. Eng: A 532, 167–177 (2012). https://doi.org/10.1016/j.msea.2011.10.078.10.1016/j.msea.2011.10.078 ↗
23. X. Hu, Y. Li, K. Li, and Z. Min, Effect of Bi segregation on the asymmetrical growth of Cu-Sn intermetallic compounds in Cu/Sn-58Bi/Cu sandwich solder joints during isothermal aging. J. Electron. Mater. 42, 3567–3572 (2013).10.1007/s11664-013-2749-y ↗
24. T. Kang, Y. Xiu, C.Z. Liu, L. Hui, J. Wang, and W. Tong, Bismuth segregation enhances intermetallic compound growth in SnBi/Cu microelectronic interconnect. J. Alloys. Compd. 509, 1785–1789 (2011).10.1016/j.jallcom.2010.10.040 ↗
25. J.-C. Lin, L.-W. Huang, G.-Y. Jang, and S.-L. Lee, Solid–liquid interdiffusion bonding between in-coated silver thick films. Thin Solid Films 410, 212–221 (2002).10.1016/S0040-6090(02)00240-7 ↗