journal article·2020-10

Failure Mechanism of the SnAgCu/SnPb Mixed Soldering Process in a Ball Grid Array Structure

Li-Yin Gao, Xian-Wei Cui, Fei-Fei Tian, Zhi-Quan Liu

Journal of Electronic Materials· Volume 49· Issue 10
Publisher page

Abstract

In this study, the influence of different reflow profiles and dosages of SnPb solder paste on the reliability of the SnAgCu/SnPb mixed assembly process was investigated. The interfacial microstructures were carefully examined through scanning electron microscopy, and two failures modes were found. Firstly, when reflowed at 245°C for 95 s, Pb-rich phases were buried within an intermetallic compound (IMC) layer and led to micro-voids and cracks under thermal stress or mechanical stress. However, upon increasing the reflow temperature or time further led to melting the solder ball totally, and the Pb element dissolved into a liquid phase and precipitated into uniform and small granules during the cooling process. Further, among the samples with different dosages of SnPb solder paste, severe shrinkage occurred at the solder joints with the addition of 12 wt.% eutectic SnPb component. Electron back-scattered diffraction analysis was conducted in order to determine the mechanism of different shrinkages. The solder ball consisted of several primary Sn grains, and the shrinkage and Pb-rich phase are preferred to appear at the grain boundary. When the solder ball consisted of a single grain, no preferred orientation of the shrinkage and Pb-rich phase were detected. The shrinkage appeared at the final solidification region, which is near the IMC layer. Moreover, the shrinkages connect to each other, and a continuous crack formed on the chip side, leading to the failure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. S. Cong, Y.N. Han, Y. Dong, J. Yang, and W.W. Zhang, in IEEE 2017 18th International Conference on Electronic Packaging Technology (2017), pp. 1258–1261.
2. M. Meilunas and P. Borgesen, J. Electron. Packag. 133, 021001 (2011).10.1115/1.4003863 ↗
3. A.R. Zbrzezny, P. Snugovsky, T. Lindsay, and R. Lau, IEEE Trans. Electron. Packag. Manuf. 29, 211 (2006).10.1109/TEPM.2006.881985 ↗
4. Y. Huang, Z. Wu and Z. Liu, in 2012 13th International Conference on Electronic Packaging Technology & High Density Packaging (2012), pp. 883–888.
5. Q. Jiang, W. Zhang, X. Wang, C. Yu, and G. Liu, Electron. Process Technol. 36, 73 (2015).
6. H.T. Chen, L. Wang, J. Han, M.Y. Li, and H. Liu, Microelectron. Eng. 96, 82 (2012).10.1016/j.mee.2012.03.005 ↗
7. P.T. Vianco, Circuit World 25, 6 (1998).10.1108/03056129910244518 ↗
8. X. Wei, X. Li, Zhoubin and G. Wei, in 2013 14th International Conference on Electronic Packaging Technology (2013), pp. 903–906.
9. A. Choubey, M. Osterman, and M. Pecht, IEEE Trans. Device Mater. Reliab. 8, 160 (2008).10.1109/TDMR.2007.915049 ↗
10. J.P. Tucker, D.K. Chan, G. Subbarayan, and C.A. Handwerker, J. Electron. Mater. 41, 596 (2012).10.1007/s11664-011-1812-9 ↗
11. l-Y Gao, Z.-Q. Liu, and C.-F. Li, J. Electron. Mater. 46, 5338 (2017).10.1007/s11664-017-5554-1 ↗
12. L. Gao, C. Li, P. Wan, H. Zhang, and Z. Liu, J. Alloy. Compd. 739, 632 (2018).10.1016/j.jallcom.2017.12.328 ↗
13. H.J. Fecht, M.X. Zhang, Y.A. Chang, and J.H. Perepezko, Metall. Trans. A 20, 795 (1989).10.1007/BF02651646 ↗
14. J.Y. Park, C.W. Yang, J.S. Ha, C.U. Kim, E.J. Kwon, S.B. Jung, and C.S. Kang, J. Electron. Mater. 30, 1165 (2001).10.1007/s11664-001-0145-5 ↗
15. C.S. Huang, G.Y. Jang, and J.G. Duh, J. Electron. Mater. 33, 283 (2004).10.1007/s11664-004-0134-6 ↗
16. C.S. Huang and J.G. Duh, J. Mater. Res. 18, 935 (2003).10.1557/JMR.2003.0128 ↗
17. C.S. Huang, J.G. Duh, Y.M. Chen, and J.H. Wang, J. Electron. Mater. 32, 89 (2003).10.1007/s11664-003-0241-9 ↗
18. Y.S. Lai, P.F. Yang, and C.L. Yeh, Microelectron. Reliab. 46, 645 (2006).10.1016/j.microrel.2005.07.005 ↗
19. X.Z. Zeng, J. Alloy. Compd. 348, 184 (2003).10.1016/S0925-8388(02)00855-1 ↗
20. C. Liu, Z. Huang, P.P. Conway and R.C. Thomson, J. Mater. Sci. 42, (2007).10.1007/s10853-006-1335-6 ↗
21. C.Q. Liu, Z.H. Huang, P. Conway and R. Thomson, IEEE, 54th Electronic Components & Technology Conference (2004), pp. 1347–1353.