Supercapacitive Performance of Lithium Doped and Undoped NiFe2O4 Thin Films by Chemical Deposition Method
Source abstract
Abstract
Lithium (Li) doped and undoped NiFe2O4 thin films for supercapacitor application have been prepared through the chemical deposition method. The Li doped and undoped NiFe2O4 thin films for structural, morphological and supercapacitive performance have been studied. As the Li doping percentage varies from 1 at. wt.% to 3 at. wt.%, the thickness of NiFe2O4 thin films increases up to 120 min deposition time, after that slight decrease in thickness was observed. SEM images show randomly grown flake-like structure of Li-NiFe2O4 thin films. The angle of contact of Li-NiFe2O4 thin films decreases with increase in Li doping into NiFe2O4 thin films. The effect of Li doping percentage on supercapacitive performance revealed that as the Li doping percentage is increased from undoped to 3 at. wt.%, the specific capacitance is increased from 314 F/g to 571 F/g.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A.K. Shukla, S. Sampath, and K. Vijaymohanan, Curr. Sci. 79, 1656 (2000).
2. D.P. Dubal, D.S. Dhawale, R.R. Salunkhe, and C.D. Lokhande, J. Electroanal. Chem. 647, 60 (2010).10.1016/j.jelechem.2010.05.010 ↗
3. D.P. Dubal, D.S. Dhawale, R.R. Salunkhe, V.S. Jamdade, and C.D. Lokhande, J. Alloys Compd. 492, 26 (2010).10.1016/j.jallcom.2009.11.149 ↗
4. S.J. Patil, B.H. Patil, R.N. Bulakhe, and C.D. Lokhande, RSC Adv. 4, 56332 (2014).10.1039/C4RA09124H ↗
5. P.R. Deshmukh, S.N. Pusawale, A.D. Jagadale, and C.D. Lokhande, J. Mater. Sci. 47, 1546 (2012).10.1007/s10853-011-5946-1 ↗
6. B. Negulescu, L. Thomas, Y. Dumont, M. Tessier, N. Keller, and M. Guyot, J. Magn. Magnes. Mater. 242, 529 (2002).10.1016/S0304-8853(01)00971-4 ↗
7. R. Hsiao and D. Mauri, Appl. Surf. Sci. 157, 185 (2000).10.1016/S0169-4332(99)00571-1 ↗
8. S.D. Sartale, C.D. Lokhande, M. Giersig, and V. Ganesan, J. Phys. Condens. Matter 16, 773 (2004).10.1088/0953-8984/16/6/008 ↗
9. JCPDS Card No. 10-0325.
10. H. Ali, M.U. Islam, I. Ali, M.N. Ashiq, S.M. Ramay, and A. Mahmood, J. Electron. Mater. 46, 5039 (2017).10.1007/s11664-017-5465-1 ↗
11. B. Shinde, S. Kamble, P. Gaikwad, V. Ghanwat, S. Tanpure, P. Pagare, B. Karale, and A. Burungale, Res. Chem. Intermed. 44, 3097 (2018).10.1007/s11164-018-3295-2 ↗
12. D.K. Dinkar, B. Das, R. Gopalan, and B.S. Dehiya, Mater. Chem. Phys. 218, 70 (2018).10.1016/j.matchemphys.2018.07.020 ↗
13. K. Kombaiah, J. JudithVijaya, L. John Kennedy, and K. Kaviyarasu, Mater. Chem. Phys. 221, 11 (2019).10.1016/j.matchemphys.2018.09.012 ↗
14. V.S. Jamadade, V.J. Fulari, and C.D. Lokhande, J. Alloys Compd. 509, 6257 (2011).10.1016/j.jallcom.2011.03.035 ↗
15. V.R. Shinde, S.B. Mahadik, T.P. Gujar, and C.D. Lokhande, Appl. Surf. Sci. 52, 7487 (2006).10.1016/j.apsusc.2005.09.004 ↗
16. P. Zhao, X. Ye, Y. Zhu, H. Jiang, L. Wang, Z. Yue, Z. Wan, and C. Jia, Electrochim. Acta 281, 717 (2018).10.1016/j.electacta.2018.05.166 ↗
17. S. Balamurugan, M.D. Devi, I. Prakash, and S. Devaraj, Appl. Surf. Sci. 449, 542 (2018).10.1016/j.apsusc.2018.01.271 ↗
18. S. Makino, R. Yamamoto, S. Sugimoto, and W. Sugimoto, J. Power Sources 326, 711 (2016).10.1016/j.jpowsour.2016.04.058 ↗