journal article·2019-04Open access

Improvement of Mn1.56(Co1−xAlx)0.96Ni0.48O4 (0.1 ≤ x ≤ 0.4) Film Preparation and Assessment of Its Structure and Properties

Qian Wang, Jun Zhang, Wenwen Kong

Journal of Electronic Materials· Volume 48· Issue 4

Abstract

A series of Mn-1.56(Co1-xAlx)(0.96)Ni0.48O4 (x=0.1, 0.2, 0.3, and 0.4) films were prepared by the chemical solution deposition method and then post-heated at 150 degrees C for 300h. Scanning electron microscopy and x-ray diffraction revealed remarkable improvements in relative density and crystallinity in post-heated Mn-1.56(Co1-xAlx)(0.96)Ni0.48O4 (x=0.1, 0.2, 0.3, and 0.4) films. From x-ray photoelectron and Raman spectroscopy, it was found that the Mn3+/Mn4+ ratio decreases after post-heating, which leads to a decrease in Raman mode intensity. Furthermore, spectroscopic ellipsometry results show that both the refractive indexes and extinction coefficients of post-heated films are higher than those of annealed films in the visible range. However, the band gaps of all the films decreased significantly after the heating process. These investigations suggest that the post-heating treatment may be preferable for fabricating Mn1.56Co0.96Ni0.48O4 thin films for optical detection.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrical and Thermal Properties of Materials · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A. Feteira, J. Am. Ceram. Soc. 92, 967 (2009).10.1111/j.1551-2916.2009.02990.x ↗
2. W. Zhou, J. Wu, C. Ouyang, Q.Y. Gao, X.F. Xu, and Z.M. Huang, J. Appl. Phys. 115, 056601 (2014).
3. B. Lavina, G. Salviulo, and A. Della Giusta, Phys. Chem. Miner. 29, 10 (2002).10.1007/s002690100198 ↗
4. F. Zhang, W. Zhou, C. Ouyang, J. Wu, Q.Y. Gao, and Z.M. Huang, AIP Adv. 5, 683 (2015).
5. M. Vakiv, O. Shpotyuk, O. Mrooz, and I. Hadzaman, J. Eur. Ceram. Soc. 21, 1783 (2001).10.1016/S0955-2219(01)00115-7 ↗
6. C. Rath, S. Anand, R.P. Das, K.K. Sahu, S. Kulkarni, S. Date, and N.C. Mishra, J. Appl. Phys. 91, 2211 (2002).10.1063/1.1432474 ↗
7. S. Jagtap, S. Gosavi, S. Rane, and D. Amalnerlar, Microelectron. Int. 26, 19 (2009).10.1108/13565360910960196 ↗
8. K. Park and I.H. Han, Mater. Sci. Eng. B 119, 55 (2005).10.1016/j.mseb.2005.01.018 ↗
9. Q. Shi, S. Bao, W. Ren, X.B. Zhang, J. Hu, N. Li, Q. Zhou, L. Wang, A.M. Chang, and L. Bian, Ceram. Int. 43, 5702 (2017).10.1016/j.ceramint.2017.01.109 ↗
10. P. Castelan, B. Ai, A. Loubiere, A. Rousset, and R. Legros, J. Appl. Phys. 72, 4705 (1992).10.1063/1.352076 ↗
11. W.W. Kong, B. Gao, C.P. Jiang, and A.M. Chang, Appl. Mechan. Mater. 748, 11 (2015).10.4028/www.scientific.net/AMM.748.11 ↗
12. L. He and Z.Y. Ling, Appl. Phys. Lett. 98, 242112 (2011).10.1063/1.3596454 ↗
13. Y. Zhao, Y.A. Opata, W. Wu, and J.C. Grivel, Mater. Charact. 124, 58 (2017).10.1016/j.matchar.2016.12.012 ↗
14. K. Parvez, S. Yang, X. Feng, and K. Müllen, Synth. Met. 210, 123 (2015).10.1016/j.synthmet.2015.07.014 ↗
15. R. Schmidt, A. Basu, A.W. Brinkman, Z. Klusek, and P.K. Datta, Appl. Phys. Lett. 86, 325 (2005).
16. C. Ma, W. Ren, L. Wang, L. Bian, J.B. Xu, and A.M. Chang, Mater. Lett. 153, 162 (2015).10.1016/j.matlet.2015.04.046 ↗
17. J. Töpfer, A. Feltz, D. Gräf, B. Hackl, L. Raupach, and P. Weissbrodt, Phys. Status Solidi A 134, 405 (2010).10.1002/pssa.2211340211 ↗
18. R. Lewandowska, M. Gaillet, G.L. Bourdon, C. Eypert, S. Morel, C. Naudin, and M. Stchakovsky, Surf. Interface Anal. 40, 588 (2008).10.1002/sia.2703 ↗
19. C. Ma, H.G. Wang, P.J. Zhao, J.B. Xu, A.M. Chang, L. Wang, and L. Bian, Mater. Lett. 136, 225 (2014).10.1016/j.matlet.2014.08.025 ↗
20. P. Chandramohan, M.P. Srinivasan, S. Velmurugan, and S.V. Narasimhan, J. Solid State Chem. 184, 89 (2011).10.1016/j.jssc.2010.10.019 ↗
21. Y.Q. Gao, Z.M. Huang, Y. Hou, J. Wu, Y.J. Ge, and J.H. Chu, Appl. Phys. Lett. 94, 1114 (2009).
22. H.G. Wang, J.B. Xu, C. Ma, F.L. Xu, L. Wang, L. Bian, and A.M. Chang, J. Alloys Compd. 615, 526 (2014).10.1016/j.jallcom.2014.06.186 ↗
23. Y. Hou, J.Q. Xue, Z.M. Huang, T.X. Li, Y.J. Ge, and J.H. Chu, Thin Solid Films 517, 901 (2008).10.1016/j.tsf.2008.08.190 ↗
24. P. Liu, P. Longo, A. Zaslavsky, and D. Pacifici, J. Appl. Phys. 119, 014304 (2016).10.1063/1.4939296 ↗
25. Y. Feng, S. Lin, S. Huang, S. Shrestha, and G. Conibeer, J. Appl. Phys. 117, 125701 (2015).10.1063/1.4916090 ↗
26. X.M. Li, H.W. Zhu, J.Q. Wei, K.L. Wang, E.Y. Xu, Z. Li, and D.H. Wu, Appl. Phys. A Mater. 97, 341 (2009).10.1007/s00339-009-5330-z ↗
27. B.D. Viezbicke, S. Patel, B.E. Davis, and D.P. Birnie, Phys. Status Solidi B 252, 1700 (2015).10.1002/pssb.201552007 ↗