journal article·2018-12Open access

Topology Optimization of Segmented Thermoelectric Generators

Christian Lundgaard, Ole Sigmund, Rasmus Bjørk

Journal of Electronic Materials· Volume 47· Issue 12

Abstract

The thermoelectric (TE) power output, $$f_P$$ , and conversion efficiency, $$f\eta $$ , for segmented thermoelectric generators (TEGs) have been optimized by spatially distributing two TE materials (BiSbTe and Skutterudite) using a numerical gradient-based topology optimization approach. The material properties are temperature-dependent, and the segmented TEGs are designed for various heat transfer rates at the hot and cold reservoirs. The topology-optimized design solutions are characterized by spike-shaped features which enable the designs to operate in an intermediate state between the material phases. Important design parameters, such as the device dimensions, objective functions and heat transfer rates, are identified, investigated and discussed. Comparing the topology optimization approach with the classical segmentation approach, the performance improvements of $$f_P$$ and $$f\eta $$ design problems depend on the heat transfer rates at the hot and the cold reservoirs, the objective function and the device dimensions. The largest performance improvements for the problems investigated are $$\approx $$ 6%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Topology Optimization in Engineering · Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. D.M. Rowe, Thermoelectrics Handbook: Macro to Nano, 1st edn (CRC Press, 2005).10.1201/9781420038903.sec1 ↗
2. C.B. Vining, Nat. Mater. (2009). https://doi.org/10.1038/nmat2361 .10.1038/nmat2361 ↗
3. G.J. Snyder and T.S. Ursell, Phys. Rev. Lett. 91, 148301 (2003). https://doi.org/10.1103/PhysRevLett.91.148301 .10.1103/PhysRevLett.91.148301 ↗
4. R. Bjørk, J. Electron. Mater. (2015). https://doi.org/10.1007/s11664-015-3731-7 .10.1007/s11664-015-3731-7 ↗
5. M.P. Bendsøe and N. Kikuchi, Comput. Method Appl. Mech. (1988). https://doi.org/10.1016/0045-7825(88)90086-2 .10.1016/0045-7825(88)90086-2 ↗
6. M. Bendsøe and O. Sigmund, Topology Optimization Theory, Methods, and Applications, 2nd edn (Springer, 2003).10.1007/978-3-662-05086-6 ↗
7. E.E. Antonova and D.C. Looman, Int. Conf. Thermoelectr. (2005). https://doi.org/10.1109/ICT.2005.1519922 .10.1109/ICT.2005.1519922 ↗
8. C. Lundgaard and O. Sigmund, Struct. Multidiscip. Optim. (2018). https://doi.org/10.1007/s00158-018-1919-1 .10.1007/s00158-018-1919-1 ↗
9. Z. Bian and A. Shakouri, Int. Conf. Thermoelectric. (2006). https://doi.org/10.1109/ICT.2006.331365 .10.1109/ICT.2006.331365 ↗
10. Y.C. Gerstenmaier and G. Wachutka, J. Appl. Phys. (2017). https://doi.org/10.1063/1.4994642 .10.1063/1.4994642 ↗
11. Z. Tian, S. Lee, and G. Chen, Ann. Rev. Heat Transfer (2014). 2014006932. https://doi.org/10.1615/AnnualRevHeatTransfer.2014006932 .10.1615/AnnualRevHeatTransfer. 2014006932 ↗
12. C. Lundgaard and O. Sigmund, Appl. Energy (Accepted for publication) (2018).
13. A. Rezania, K. Yazawa, L.A. Rosendahl, and A. Shakouri, Int. J. Therm. Sci. (2013). https://doi.org/10.1016/j.ijthermalsci.2013.05.002 .10.1016/j.ijthermalsci.2013.05.002 ↗
14. N. Wojtas and C. Hierold, Int. J. Therm. Sci. (2013). https://doi.org/10.1109/Transducers.2013.6627032 .10.1109/Transducers.2013.6627032 ↗
15. M.M. Barry, K.A. Agbim, and M.A. Chyu, J. Electron. Mater. 44(6), 1394–1401. https://doi.org/10.1007/s11664-014-3380-2 .10.1007/s11664-014-3380-2 ↗
16. S. Bélanger and L. Gosselin, Int. J. Energy Res. (2011). https://doi.org/10.1002/er.1820 .10.1002/er.1820 ↗
17. A. Martínez, J.G. Vian, D. Astrain, A. Rodríguez, and I. Berrio, J. Electron. Mater. (2010). https://doi.org/10.1007/s11664-010-1291-4 .10.1007/s11664-010-1291-4 ↗
18. Z. Zhang, L.N. Chen, Z.J. Chen, G.Q. Xiao, and Z.J. Liu, J. Electron. Mater. (2015). https://doi.org/10.1007/s11664-015-3754-0 .10.1007/s11664-015-3754-0 ↗
19. C. Favarel, J.-P. Bédécarrats, T. Kousksou, and D. Champier, Energy Convers. Manag. (2016). https://doi.org/10.13044/j.sdewes.2015.03.0020 .10.13044/j.sdewes.2015.03.0020 ↗
20. X. Gou, H. Xiao, and S. Yang, Appl. Energy (2010). https://doi.org/10.1016/j.apenergy.2010.02.013 .10.1016/j.apenergy.2010.02.013 ↗
21. J. Esarte, G. Min, and D.M. Rowe, J. Power Sources https://doi.org/10.1016/S0378-7753(00)00566-8 (2001).10.1016/S0378-7753(00)00566-8 ↗
22. R.O. Suzuki, Y. Sasaki, T. Fujisaka, and M. Chen, J. Electron. Mater. (2012). https://doi.org/10.1007/s11664-012-2074-x .10.1007/s11664-012-2074-x ↗
23. J. Yu and H. Zhao, J. Power Sources (2007). https://doi.org/10.1016/j.jpowsour.2007.07.045 .10.1016/j.jpowsour.2007.07.045 ↗
24. R. Bjørk, A. Sarhadi, N. Pryds, N. Lindeburg, and P. Viereck. Energy Convers. Manag. (2016). https://doi.org/10.1016/j.enconman.2016.04.042 .10.1016/j.enconman.2016.04.042 ↗
25. A. Sarhadi, R. Bjørk, N. Lindeburg, P. Viereck, and N. Pryds, Energy Convers. Manag. (2016). https://doi.org/10.1016/j.enconman.2016.04.052 .10.1016/j.enconman.2016.04.052 ↗
26. Y. Ma, Q. Hao, B. Poudel, Y. Lan, B. Yu, D. Wang, G. Chen, and Z. Ren, Nano Lett. (2008). https://doi.org/10.1021/nl8009928 .10.1021/nl8009928 ↗
27. A. Muto, J. Yang, B. Poudel, Z. Ren, and G. Chen, Adv. Energy Mater. (2013). https://doi.org/10.1002/aenm.201200503 .10.1002/aenm.201200503 ↗
28. T.S. Ursell and G.N. Snyder, Int. Conf. Thermoelectric. (2002). https://doi.org/10.1109/ICT.2002.1190349 .10.1109/ICT.2002.1190349 ↗
29. P.H. Ngan, D.V. Christensen, G.J. Snyder, L.T. Hung, S. Linderoth, N. Van Nong, and N. Pryds, Phys. Status Solidi A (2014). https://doi.org/10.1002/pssa.201330155 .10.1002/pssa.201330155 ↗
30. S.P. Yushanov, L.T. Gritter, J.S. Crompton, and K.C. Koppenhoefer, in Proceedings of the 2011 COMSOL Conference, Boston, USA (2011).
31. R.D. Cook, D.S. Malkus, M.E. Plesha, and R.J. Witt, Concepts and Applications of Finite Element Analysis, 4th edn (Wiley, New York, 2007).
32. P. Michaleris, D.A. Tortorelli, and C.A. Vidal. Int. J. Numer. Methods Eng. (1994). https://doi.org/10.1002/nme.1620371408 .10.1002/nme.1620371408 ↗
33. J.K. Guest and J.H. Prévost, Int. J. Numer. Methods Eng. (2006). https://doi.org/10.1002/nme.1560 .10.1002/nme.1560 ↗
34. O. Sigmund, Struct. Multidiscip. Optim. (2007). https://doi.org/10.1007/s00158-006-0087-x .10.1007/s00158-006-0087-x ↗
35. A. Sakai, T. Kanno, K. Takahashi, H. Tamaki, H. Kusada, Y. Yamada, and H. Abe, Sci. Rep. UK (2014). https://doi.org/10.1038/srep06089 .10.1038/srep06089 ↗
36. W. Seifert and V. Pluschke, Phys. Status Solidi A (2014). https://doi.org/10.1002/pssa.201330392 .10.1002/pssa.201330392 ↗
37. Y. Yang, S.H. Xie, F.Y. Ma, and C.H. Lei, J. Appl. Phys. (2012). https://doi.org/10.1063/1.3674279 .10.1063/1.3674279 ↗
38. W. Seifert, E.Müller, and S. Walczak, Int. Conf. Thermoelectric. (2006). https://doi.org/10.1109/ICT.2006.331241 .10.1109/ICT.2006.331241 ↗
39. Y.C. Gerstenmaier and G. Wachutka, Phys. Rev. E (2012). https://doi.org/10.1103/PhysRevE.86.056703 .10.1103/PhysRevE.86.056703 ↗
40. D.M. De Leon, J. Alexandersen, J.S. Jun, and O. Sigmund, Struct. Multidiscip. Optim. (2015). https://doi.org/10.1007/s00158-015-1279-z10.1007/s00158-015-1279-z ↗