journal article·2017-05

Low Resistance Ohmic Contact for ZnSb Thin Film

Meimei Yin, Aihua Zhong, Jingting Luo, Fu Li, Zhuanghao Zheng, Ping Fan

Journal of Electronic Materials· Volume 46· Issue 5
Publisher page

Abstract

To further improve the performance and power density of thermoelectric devices, the size of the device needs to be scaled down from macroscale to microscale. Different from the macroscale device, the specific contact resistivity ρc of the metal contact to the microscale device becomes a key point to the device's efficiency. In this study, a P type ZnSb thin film was deposited on glass substrate using a radio frequency magnetron sputtering system, followed by annealing at 325°C in an Ar atmosphere. X-ray diffraction, scanning electron microscopy, and the Hall measurement system were utilized for characterization of the ZnSb. The ohmic contact properties of metallic Co and Mo on the annealed ZnSb thin films were investigated, indicating that metallic Co has a lower specific contact resistivity ρc to ZnSb. The effect of a diluted HCl-etch prior to Co electrode deposition was also studied. The results show that a HCl-etch is effective for the reduction of the ρc. The dependence of ρc on the annealing temperature was also studied. Through HCl-etch and annealing at 200°C, specific contact resistivity ρc as low as 10−7 Ω cm2 is successfully obtained on the Co electrode, providing a good method to fabricate a highly efficient ZnSb-based micro device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Nanowire Synthesis and Applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. D.M. Rowe, Thermoelectrics and Its Energy Harvesting (Boca Raton: CRC Press, 2012), p. 1912.
2. L.M. Goncalves, R.P. Rocha, J.P. Carmo, and J.H. Correia, IECON (2009). doi: 10.1109/IECON.2009.5415320 .10.1109/IECON.2009.5415320 ↗
3. L. Rushing, A. Shakouri, P. Abraham, and J.E. Bowers, Proc. ICT (1997). doi: 10.1109/ICT.1997.667612 .10.1109/ICT.1997.667612 ↗
4. R.P. Gupta, K. Xiong, J.B. White, K. Cho, H.N. Alshareef, and B.E. Gnade, J. Electrochem. Soc. 157, H666 (2010).10.1149/1.3385154 ↗
5. Z. Zheng, P. Fan, J. Luo, G. Liang, P. Liu, and D. Zhang, J. Alloys Compd. 668, 8 (2016).10.1016/j.jallcom.2016.01.207 ↗
6. Q. Guo and S. Luo, Funct. Mater. Lett. 08, 1550028 (2015).10.1142/S1793604715500289 ↗
7. H.B. Lee, J.H. We, H.J. Yang, K. Kim, K.C. Choi, and B.J. Cho, Thin Solid Films 519, 5441 (2011).10.1016/j.tsf.2011.03.031 ↗
8. P. Fan, Z. Zheng, Y. Li, Q. Lin, J. Luo, G. Liang, X. Cai, D. Zhang, and F. Ye, Appl. Phys. Lett. 106, 073901 (2015).10.1063/1.4909531 ↗
9. P. Fan, Z. Zheng, Z. Cai, T. Chen, P. Liu, X. Cai, D. Zhang, G. Liang, and J. Luo, Appl. Phys. Lett. 102, 033904 (2013).10.1063/1.4788817 ↗
10. S.J. Kim, J.H. We, and B.J. Cho, Energy Environ. Sci. 7, 1959 (2014).10.1039/c4ee00242c ↗
11. G. De Aloysio, G. D’Alessandro, and F. de Monte, Int. J. Heat Mass Transf. 95, 972 (2016).10.1016/j.ijheatmasstransfer.2015.12.052 ↗
12. H. Lv, X.-D. Wang, T.-H. Wang, and C.-H. Cheng, Appl. Energy 164, 501 (2016).10.1016/j.apenergy.2015.11.068 ↗
13. P.B. Johns, IEEE Trans. Microw. Theory Tech. 35, 370 (1987).10.1109/TMTT.1987.1133658 ↗
14. M. Krumphol and P. Russer, IEEE Trans. Microw. Theory Tech. 42, 1660 (1994).10.1109/22.310559 ↗
15. R. Scaramuzza and A.J. Lowery, Electron. Lett. 26, 1947 (1990).10.1049/el:19901260 ↗
16. P.N. Vinod, J. Mater. Sci. Mater. Electron. 22, 1248 (2011).10.1007/s10854-011-0295-z ↗
17. E.F. Chor and J. Lerdworatawee, IEEE Trans. Electron Dev. 49, 105 (2002).10.1109/16.974756 ↗
18. G.K. Reeves and H.B. Harrison, Solid State Electron. 41, 1067 (1997).10.1016/S0038-1101(97)00062-2 ↗
19. A. Zhong, T. Sasaki, and K. Hane, Int. J. Hydrog. Energy 39, 8564 (2014).10.1016/j.ijhydene.2014.03.120 ↗