Root Cause Investigation of Lead-Free Solder Joint Interfacial Failures After Multiple Reflows
Source abstract
Abstract
Solder joint interconnects in three-dimensional (3D) packages with package stacking configurations typically must undergo multiple reflow cycles during the assembly process. In this work, interfacial open joint failures between the bulk solder and the intermetallic compound (IMC) layer were found in Sn–Ag–Cu (SAC) solder joints connecting a small package to a large package after multiple reflow reliability tests. Systematic progressive 3D x-ray computed tomography experiments were performed on both incoming and assembled parts to reveal the initiation and evolution of the open failures in the same solder joints before and after the reliability tests. Characterization studies, including focused ion beam cross-sections, scanning electron microscopy, and energy-dispersive x-ray spectroscopy, were conducted to determine the correlation between IMC phase transformation and failure initiation in the solder joints. A comprehensive failure mechanism, along with solution paths for the solder joint interfacial failures after multiple reflow cycles, is discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Integrated Circuits and Semiconductor Failure Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Y. Li, P.K. Muthur Srinath, and D. Goyal, J. Electron. Mater. 45, 116 (2016).10.1007/s11664-015-4165-y ↗
2. C.K. Lee, W.K. Loh, K.E. Ong, and C. Ian, IEMT 2006 (2006), p. 185.
3. D. Bušek, K. Dušek, M. Plaček1, J. Urbánek, J. Horník, and J. Holec, IEEE Conference Proceedings From the 38th International Spring Seminar on Electronics Technology (2015), p. 306.
4. S. Perng, W. Xie, T. Lee, and C. Guirguis, Conference Proceedings from SMTA International, (2015), 104.
5. Y. Li, M. Pacheco, D. Goyal, J.W. Elmer, H.D. Barth, and D. Parkinson, Conference Proceedings from the 64th Electronic Components and Technology Conference (ECTC) (2014), p. 1457.
6. Y. Li, L. Xu, P. Liu, B. Pathangey, M. Pacheco, M. Hossain, L. Hu, R. Dias, and D. Goyal, Conference Proceedings from the 65th Electronic Components and Technology Conference (ECTC) (2015), p. 432.
7. Y. Li, J.S. Moore, B. Pathangey, R.C. Dias, and D. Goyal, IEEE Trans. Device Mater. Reliab. 12, 494 (2012).10.1109/TDMR.2012.2190736 ↗
8. S. Ishikawa, E. Hashino, T. Kono, and K. Tatsumi, Mater. Trans. 46, 2351 (2005).10.2320/matertrans.46.2351 ↗
9. B. Chung, J. Choi, and J. Huh, J. Electron. Mater. 41, 44 (2012).10.1007/s11664-011-1736-4 ↗
10. V. Vuorinen, H. Yu, T. Laurila, and J.K. Kivilahti, J. Electron. Mater. 37, 792 (2008).10.1007/s11664-008-0411-x ↗
11. C.E. Ho, S.C. Yang, and C.R. Kao, J. Mater. Sci.: Mater. Electron. 18, 155 (2007).