journal article·2014-01

Evaluation of Strain Measurement in a Die-to-Interposer Chip Using In Situ Synchrotron X-Ray Diffraction and Finite-Element Analysis

Hsueh-Hsien Hsu, Tz-Cheng Chiu, Tao-Chih Chang, Shin-Yi Huang, Hsin-Yi Lee, Ching-Shun Ku, Yang-Yi Lin, Chien-Hao Su, Li-Wei Chou, Yao-Tsung Ouyang, YI-Ting Huang, Albert T. Wu

Journal of Electronic Materials· Volume 43· Issue 1
Publisher page

Abstract

To decrease the size of portable devices, this study incorporates a stacked three-dimensional integrated circuit architecture into advanced packaging techniques. The traditional FR-4 substrate was substituted with silicon interposers. Because silicon is rigid and highly resistant to deformation, this minimizes thermal stress caused by thermal expansion mismatch in the structure. This study shows that underfill applied stress to the dies when the temperature was varied, threatening the devices. Damage was most likely to occur at the die corners. The stresses were measured in situ at different temperatures using synchrotron radiation x-ray analysis. Simulation results confirm the measured data trends.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. S. Savastiouk, O. Siniaguine, and M. Diorio, Adv. Packag. 7, 55–58 (1998).
2. C.C. Chung, T.F. Yang, J.Y. Juang, Y.P. Hung, C.J. Zhan, Y.M. Lin, C.T. Lin, P.C. Chang, and T.C. Chang, Microelectron. Reliab. 48, 1875–1881 (2008).10.1016/j.microrel.2008.09.005 ↗
3. T. Alander, I. Suominen, P. Heino, and E. Ristolainen, Solder. Surf. Mt. Technol. 15, 8–14 (2003).10.1108/09540910310505062 ↗
4. S. Katsurayama and H. Tohmyoh, J. Electron. Packag. 131, 1–031005 (2009).10.1115/1.3144153 ↗
5. K. Verma, D. Columbus, and B. Han, IEEE Trans. Electron. Packag. Manuf. 22, 63 (1999).10.1109/6104.755090 ↗
6. S.A. Gee, W.F. Van Den Bogert, and V.R. Akylas, IEEE Trans. Compon. Packag. Technol. 12, 587 (1989).
7. P.S. Ho, G. Wang, M. Ding, J.H. Zhao, and X. Dai, Microelectron. Reliab. 44, 719 (2004).10.1016/j.microrel.2004.01.007 ↗
8. R. Darveaux, I. Turlik, L.T. Hwang, and A. Reisman, IEEE Trans. Compon. Packag. Technol. 12, 663 (1989).
9. A. Toda and N. Ikarashi, Jpn. J. Appl. Phys. 49, 04DB03 (2010).10.1143/JJAP.49.04DB03 ↗
10. J. Kanatharana, J.J. Pérez-Camacho, T. Buckley, P.J. McNally, T. Tuomi, M. O’Harem, D. Lowney, W. Chen, R. Rantamäki, L. Knuuttila, and J. Riikonen, J. Phys. D 36, A60 (2003).10.1088/0022-3727/36/10A/312 ↗
11. P.J. McNally, J. Kanatharana, B.H.W. Toh, D.W. Mcneill, A.N. Danilewsky, T. Tuomi, L. Knuuttila, J. Riikonen, J. Toivonen, and R. Simon, J. Appl. Phys. 96, 7596 (2004).10.1063/1.1811780 ↗
12. K. Chen, N. Tamura, W. Tang, M. Kunz, Y.C. Chou, K.N. Tu, and Y.S. Lai, J. Appl. Phys. 107, 063502 (2010).10.1063/1.3309750 ↗
13. A.T. Wu, K.N. Tu, J.R. Lloyd, N. Tamura, B.C. Valek, and C.R. Kao, Appl. Phys. Lett. 85, 2490 (2004).10.1063/1.1795353 ↗
14. A.T. Wu, C.Y. Tsai, C.L. Kao, M.K. Shih, Y.S. Lai, H.Y. Lee, and C.S. Ku, J. Electron. Mater. 38, 2308 (2009).10.1007/s11664-009-0934-9 ↗
15. M. Sobiech, M. Wohlschlögel, U. Welzel, E.J. Mittemeijer, W. Hügel, A. Seekamp, W. Liu, and G.E. Ice, Appl. Phys. Lett. 94, 221901 (2009).10.1063/1.3147864 ↗
16. A.S. Budiman, H.A.S. Shin, B.J. Kim, S.H. Hwang, H.Y. Son, Q.H. Chung, K.Y. Byun, N. Tamura, M. Kunz, and Y.C. Joo, Microelectron. Reliab. 52, 530–533 (2011).10.1016/j.microrel.2011.10.016 ↗
17. A.S. Budiman, S.M. Han, J.R. Greer, N. Tamura, J.R. Patel, and W.D. Nix, Acta Mater. 58, 602–608 (2008).10.1016/j.actamat.2007.10.031 ↗
18. A.S. Budiman, G.H. Lee, M.J. Nurek, D.C. Jang, S.M.J. Han, N. Tamura, M. Kunz, J.R. Greer, and T.Y. Tsui, Mater. Sci. Eng. A 538, 89–97 (2012).10.1016/j.msea.2012.01.017 ↗
19. S.N. Hsiao, F.T. Yuan, H.W. Chang, S.K. Chen, and H.Y. Lee, Appl. Phys. Lett. 94, 232505 (2009).10.1063/1.3153513 ↗
20. H.C. Yang, and T.C. Chiu, in Proc. Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronics Systems, (2012) pp. 863–869.10.1109/ITHERM.2012.6231517 ↗
21. A. Jalar, Z. Kornain, R. Rasid, S. Abdullah, and N.K. Othman, Adv. Mater. Res. 148, 1108 (2011).
22. K.P. Wang, Y.Y. Huang, A. Chandra, and K.X. Hu, IEEE Trans. Compon. Packag. Technol. 23, 309 (2000).10.1109/6144.846769 ↗
23. M. Modi, C. McCormick, and N. Armendariz, Proceedings of Electronic Components and Technology Conference, (Orlando, FL, USA, 2005) pp. 977–982.
24. T.Y. Tee, H.S. Ng, D. Yap, X. Baraton, and Z. Zhong, Microelectron. Reliab. 43, 1117 (2003).10.1016/S0026-2714(03)00127-6 ↗