journal article·2008-06

Some Practical Issues of Curvature and Thermal Stress in Realistic Multilevel Metal Interconnect Structures

T.-S. Park, M. Dao, S. Suresh, A.J. Rosakis, D. Pantuso, S. Shankar

Journal of Electronic Materials· Volume 37· Issue 6
Publisher page

Abstract

This paper presents the results of a systematic study of curvature and stress evolution during thermal loading in single- and multilevel interconnect line structures which have been deposited on a much thicker substrate. Effects of line aspect ratio, passivation geometry, and metal density within a metalization level on thermal stress evolution in the lines are addressed. The current analytical stress model enables us to predict that interaction between lines on the same level, i.e., in the lateral direction, is so strong that it cannot be neglected. A two-dimensional (2-D) finite element method has been used to verify the accuracy of the current model, while available experimental data have been compared with theory. In order to capture the exact variation of the thermal stresses at different metalization levels, and to investigate the effect of the upper level line arrangements on the stress states at the lower level, a three-dimensional (3-D) finite element analysis was employed. It can be seen that the interaction between levels in the vertical direction is quite weak when the thickness of the interlevel dielectric (ILD) layer becomes comparable to that of the metal layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. M.A. Korhonen, P. Børgesen, K.N. Tu, and C.-Y. Li, J. Appl. Phys. 73, 3790 (1993)10.1063/1.354073 ↗
2. J.J. Clement and C.V. Thompson, J. Appl. Phys. 78, 900 (1995)10.1063/1.360281 ↗
3. R.J. Gleixner, B.M. Clemens, and W.D. Nix, J. Mater. Res. 12, 2081 (1997)10.1557/JMR.1997.0279 ↗
4. B. Greenbaum, A.I. Sauter, P.A. Flinn, and W.D. Nix, Appl. Phys. Lett. 58, 1845 (1991)10.1063/1.105075 ↗
5. P. Børgesen, J.K. Lee, R.J. Gleixner, and C.-Y. Li, Appl. Phys. Lett. 60, 1706 (1992)10.1063/1.107192 ↗
6. D. Kim, W.D. Nix, M.D. Deal, and J.D. Plummer, J. Mater. Res. 15, 1709 (2000)10.1557/JMR.2000.0246 ↗
7. S. Chiras and D.R. Clarke, J. Appl. Phys. 88, 6302 (2000)10.1063/1.1289044 ↗
8. T. Marieb, A.S. Mack, N. Cox, D. Gardner, and X.C. Mu, Mat. Res. Symp. Proc., 403, 639 (1996)10.1557/PROC-403-639 ↗
9. M.A. Moske, P.S. Ho, D.J. Mikalsen, J.J. Cuomo, and R. Rosenberg, J. Appl. Phys. 74, 1716 (1993)10.1063/1.354826 ↗
10. I.-S. Yeo, S.G.H. Anderson, P.S. Ho, and C.K. Hu, J. Appl. Phys. 78, 953 (1995)10.1063/1.360289 ↗
11. M.J. Kobrinsky, C.V. Thompson, and M.E. Gross, J. Appl. Phys. 89, 91 (2001)10.1063/1.1326856 ↗
12. Y.-L. Shen, S. Suresh, and I.A. Blech, J. Appl. Phys. 80, 1388 (1996)10.1063/1.362938 ↗
13. A. Gouldstone, Y.-L. Shen, S. Suresh, and C.V. Thompson, J. Mater. Res. 13, 1956 (1998)10.1557/JMR.1998.0275 ↗
14. E.S. Ege and Y.-L. Shen, J. Elect. Mater. 32, 1000 (2003)10.1007/s11664-003-0082-6 ↗
15. H. Niwa, H. Yagi, H. Tsuchikawa, and M. Kato, J. Appl. Phys. 68, 328 (1990)10.1063/1.347137 ↗
16. M.A. Korhonen, R.D. Black, and C.-Y. Li, J. Appl. Phys. 69, 1748 (1991)10.1063/1.347222 ↗
17. A. Wikström, P. Gudmundson and S. Suresh, J. Appl. Phys. 86, 6088 (1999)10.1063/1.371658 ↗
18. Y.-L. Shen, J. Mater. Res. 12, 2219 (1997)10.1557/JMR.1997.0296 ↗
19. N. Misawa, T. Ohba, and H. Yagi, MRS Bull. 19, 63 (1994)10.1557/S088376940004776X ↗
20. G.G. Stoney, Proc. R. Soc. Lond. A82, 172 (1909)10.1098/rspa.1909.0021 ↗
21. M. Finot and S. Suresh, J. Mech. Phys. Solids 44, 683 (1996)10.1016/0022-5096(96)84548-0 ↗
22. T.-S. Park and S. Suresh, Acta Mater. 48, 3169 (2000)10.1016/S1359-6454(00)00114-2 ↗
23. A. Wikström, P. Gudmundson, and S. Suresh, J. Mech. Phys. Solids 47, 1113 (1999)10.1016/S0022-5096(98)00092-1 ↗
24. A. Wikström and P. Gudmundson, Acta Mater. 48, 2429 (2000)10.1016/S1359-6454(00)00077-X ↗
25. L.B. Freund and S. Suresh, Thin Film Materials; Stress, Defect Formation, and Surface Evolution, Chap. 3 (UK: Cambridge University Press, 2004)10.1017/CBO9780511754715 ↗
26. ABAQUS Version 6.1, general purpose finite element program, Hibbit, Karlson and Sorensen Inc., Pawtucket, RI, USA (2000)
27. S.P. Hau-Riege and C. V. Thompson, J. Mater. Res. 15, 1797 (2000)10.1557/JMR.2000.0259 ↗
28. J.-H. Zhao, T. Ryan, P.S. Ho, A.J. McKerrow and W.-Y. Shih, J. Appl. Phys. 88, 3029 (2000)10.1063/1.1287771 ↗
29. A.J. Rosakis, T.-S. Park, and S. Suresh, Thin Solid Films (Submitted).