journal article·2014-11

Investigation of the Growth of Intermetallic Compounds Between Cu Pillars and Solder Caps

Jui-Ching Lin, Yi Qin, Julia Woertink

Journal of Electronic Materials· Volume 43· Issue 11
Publisher page

Abstract

In flip chip applications, Cu pillars with solder caps are regarded as next-generation electronic interconnection technology, because of high input/output density. However, because of diffusion and reaction of Sn and Cu during the high-temperature reflow process, intermetallic compounds (IMC) are formed, and grow, at the interface between the cap and the pillar. Understanding the growth behavior of interfacial IMC is critical in the design of solder interconnections, because excessive growth of IMC can reduce the reliability of connections. In this study, the growth of IMC during thermal cycling, an accelerated method of testing the service environment of electronic devices, was studied by use of focused ion beam–scanning electron microscopy. Under alternating high and low-temperature extremes, growth of Cu6Sn5 (η-phase) and Cu3Sn (e-phase) IMC was imaged and measured as a function of the number of cycles. The total IMC layer grew significantly thicker but became more uniform during thermal cycling. The Cu3Sn layer was initially thinner than the Cu6Sn5 layer but outgrew the Cu6Sn5 layer after 1000 cycles. It was found that, with limited Cu and Sn diffusion, consumption of Cu6Sn5 for growth of the Cu3Sn layer can result in a thinner Cu6Sn5 layer after thermal cycling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. R. Asgari, 27th Annual IEEE/SEMI International, (2002), pp. 18–22.
2. J.H. Lau, Flip Chip Technologies (McGraw-Hill Professional, 1995), pp. 25–28.
3. V. Eveloy, S. Ganesan, Y. Fukuda, J. Wu, and M.G. Pecht, IEEE Trans. Compon. Packag. Technol. 28, 884–894 (2005).10.1109/TCAPT.2005.859353 ↗
4. B. Kim and T. Ritzdorf, J. Electrochem. Soc. 150, C577–C584 (2003).10.1149/1.1596163 ↗
5. M. Datta, Electrochim. Acta 48, 2975–2985 (2003).10.1016/S0013-4686(03)00363-3 ↗
6. C.E. Ho, S.C. Yang, and C.R. Kao, Lead-Free Electronic Solders, (Berlin: Springer, 2007), pp. 155–174.10.1007/978-0-387-48433-4_10 ↗
7. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95–141 (2000).10.1016/S0927-796X(00)00010-3 ↗
8. F. Wafula, L. Yin, P. Borgesen, D. Andala, and N. Dimitrov, J. Electron. Mater. 41, 1898–1906 (2012).10.1007/s11664-012-2017-6 ↗
9. L. Yin, F. Wafula, N. Dimitrov, and P. Borgesen, J. Electron. Mater. 41, 302–312 (2012).10.1007/s11664-011-1764-0 ↗
10. H. Xiao, X.Y. Li, Y.X. Zhu, J.L. Yang, J. Chen, and F. Guo, J.␣Mater. Sci. Mater. Electron. 24, 2527–2536 (2013).10.1007/s10854-013-1128-z ↗
11. J.-W. Yoon, B.-I. Noh, Y.-H. Lee, H.-S. Lee, and S.-B. Jung, Microelectron. Reliab. 48, 1864–1874 (2008).10.1016/j.microrel.2008.07.065 ↗
12. A. Choubey, H. Yu, M. Osterman, M. Pecht, F. Yun, L. Yonghong, and X. Ming, J. Electron. Mater. 37, 1130–1138 (2008).10.1007/s11664-008-0466-8 ↗
13. X.Y. Li, F.H. Li, F. Guo, and Y.W. Shi, J. Electron. Mater. 40, 51–61 (2011).10.1007/s11664-010-1401-3 ↗
14. J. S. S. T. ASSOCIATION, (2005).
15. J.-C. Lin, W. Heeschen, J. Reffner, and J. Hook, Microsc. Microanal. 18, 266–271 (2012).10.1017/S143192761101244X ↗
16. W.S. Rasband, U. S. National Institutes of Health, Bethesda, Maryland, USA, http://imagej.nih.gov/ij/ , 1997–2012.
17. B. Ebersberger and C. Lee, ECTC, (2011).
18. H.F. Zou, Q.K. Zhang, and Z.F. Zhang, J. Electron. Mater. 40, 1542–1548 (2011).10.1007/s11664-011-1645-6 ↗
19. G. Zeng, S.B. Xue, L. Zhang, L.L. Gao, W. Dai, and J.D. Luo, J. Mater. Sci. Mater. Electron. 21, 421–440 (2010).10.1007/s10854-010-0086-y ↗
20. K.S. Kim, S.H. Huh, and K. Suganuma, Mater. Sci. Eng. A 333, 106–114 (2002).10.1016/S0921-5093(01)01828-7 ↗
21. B.J. Kim, G.T. Lim, J. Kim, K. Lee, Y.B. Park, and Y.C. Joo, Electron. Compon. C, pp. 336–340 (2008).
22. J. Shen, M. Zhao, P. He, and Y. Pu, J. Alloy Compd. 574, 451–458 (2013).10.1016/j.jallcom.2013.05.156 ↗
23. H.K. Kim and K.N. Tu, Phys. Rev. B 53, 16027–16034 (1996).10.1103/PhysRevB.53.16027 ↗
24. P.L. Tu, Y.C. Chan, K.C. Hung, and J.K.L. Lai, Scripta Mater. 44, 317–323 (2001).10.1016/S1359-6462(00)00590-X ↗
25. B. Chao, S.H. Chae, X.F. Zhang, K.H. Lu, J. Im, and P.S. Ho, Acta Mater. 55, 2805–2814 (2007).10.1016/j.actamat.2006.12.019 ↗
26. K.N. Tu, Mater. Chem. Phys. 46, 217–223 (1996).10.1016/S0254-0584(97)80016-8 ↗
27. K.N. Tu and R.D. Thompson, Acta Metall. 30, 947–952 (1982).10.1016/0001-6160(82)90201-2 ↗
28. H.L.J. Pang, K.H. Tan, X.Q. Shi, and Z.P. Wang, Mater. Sci. Eng. A 307, 42–50 (2001).10.1016/S0921-5093(00)01958-4 ↗
29. P.J. Shang, Z.Q. Liu, X.Y. Pang, D.X. Li, and J.K. Shang, Acta Mater. 57, 4697–4706 (2009).10.1016/j.actamat.2009.06.025 ↗