journal article·2012-02

Finite-Element Analysis of Current-Induced Thermal Stress in a Conducting Sphere

Ming Liu, Fuqian Yang

Journal of Electronic Materials· Volume 41· Issue 2
Publisher page

Abstract

Understanding the electrothermal-mechanical behavior of electronic interconnects is of practical importance in improving the structural reliability of electronic devices. In this work, we use the finite-element method to analyze the Joule-heating-induced thermomechanical deformation of a metallic sphere that is sandwiched between two rigid plates. The deformation behavior of the sphere is elastic–perfectly plastic with Young’s modulus and yield stress decreasing with temperature. The mechanical stresses created by Joule heating are found to depend on the thermal and mechanical contact conditions between the sphere and the plates. The temperature rise in the sphere for the diathermal condition between the sphere and the plates deviates from the square relation between Joule heat and electric current, due to the temperature dependence of the electrothermal properties of the material. For large electric currents, the simulations reveal the decrease of von Mises stress near the contact interfaces, which suggests that current-induced structural damage will likely occur near the contact interfaces.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Adhesion, Friction, and Surface Interactions · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. G.D. Giacomo, Reliability of Electronic Packages and Semiconductor Devices (New York: McGraw-Hill, 1996).
2. N. Chandler, GEC J. Tech. 14, 115 (1997).
3. P. Rolicz, J. Appl. Phys. 49, 4363 (1978).10.1063/1.325477 ↗
4. F.Q. Yang, J. Appl. Phys. 106, 113536 (2009).10.1063/1.3269717 ↗
5. F.Q. Yang and L.N. An, Int. J. Appl. Electromagn. Mech. 32, 125 (2010).10.3233/JAE-2010-1068 ↗
6. F.Q. Yang and W. Song, Int. J. Appl. Electromagn. Mech. 27, 9 (2008).10.3233/JAE-2008-937 ↗
7. X. Wang, S.R. Casolco, G. Xu, and J.E. Garay, Acta Mater. 55, 3611 (2007).10.1016/j.actamat.2007.02.022 ↗
8. A. Cincotti, A.M. Locci, R. Orrù, and G. Cao, AIChE J. 53, 703 (2007).10.1002/aic.11102 ↗
9. F.Z. Kong, W.Y. Yin, J.F. Mao, and Q.H. Liu, IEEE Trans. Adv. Packag. 33, 729 (2010).10.1109/TADVP.2010.2048902 ↗
10. X.P. Wang, W.P. Yin, and S. He, IEEE Trans. Electron Dev. 57, 1382 (2010).10.1109/TED.2010.2045676 ↗
11. K. Vanmeensel, A. Laptev, J. Hennicke, J. Vleugels, and O. Van der Biest, Acta Mater. 53, 4379 (2005).10.1016/j.actamat.2005.05.042 ↗
12. W.D. Callister Jr. and D.G. Rethwisch, Materials Science and Engineering: an Introduction, 8th ed. (New Jersey: Wiley, 2010).
13. P.T. Vianco, J.A. Rejent, and A.C. Kilgo, J. Electron. Mater. 32, 142 (2003).10.1007/s11664-003-0185-0 ↗
14. H.E. Fang, C.L. Chow, and F. Yang, Key Eng. Mater. 145–149, 367 (1998).10.4028/www.scientific.net/KEM.145-149.367 ↗
15. ABAQUS User Manual, V. 6.9 (Hibbit, Karlsson, Sorensen, Inc., Rhode Island, 1994).
16. X.F. Li, F.Q. Zu, H.F. Ding, J. Yu, L.J. Liu, Q. Li, and Y. Xi, Phys. B 358, 126 (2005).10.1016/j.physb.2004.12.037 ↗
17. A. Kumar and O.P. Katyal, J. Mater. Sci. Lett. 9, 1094 (1990).10.1007/BF00727887 ↗
18. W. Hemminger and R. Jugel, Int. J. Thermophys. 6, 483 (1985).10.1007/BF00508892 ↗
19. C.Y. Ho, R.W. Powell, and P.E. Liley, J. Phys. Chem. Ref. Data 1, 279 (1972).10.1063/1.3253100 ↗
20. B.B. Alchagirov and A.M. Chochaeva, High Temp. 38, 44 (2000).10.1007/BF02755565 ↗
21. P.J. Adams (MS Thesis, Massachusetts Institute of Technology, 1986).
22. F. Yasumasa and O. Teruaki, J. Solid Mech. Mater. Eng. 2, 981 (2008).10.1299/jmmp.2.981 ↗
23. W.J. Tomlinson and A. Fullylove, J. Mater. Sci. 27, 5777 (1992).10.1007/BF01119737 ↗
24. F. Gao, J. Qu, H. Nishikawa, and T. Takemoto, Proc. 58th Electron. Comp. Tech. Conf. ECTC (2008), pp. 466–471.
25. V.T. Deshpande and D.B. Sirdeshmukh, Acta Cryst. 14, 355 (1961).10.1107/S0365110X61001212 ↗
26. S.P. Timoshenko and J.N. Goodier, Theory of Elasticity, 3rd ed. (New York: McGraw-Hill Book, 1970).
27. M.M. Chaudhri, I.M. Hutchings, and P.L. Makin, Phil. Mag. 49, 493 (1984).10.1080/01418618408236551 ↗
28. H. Hashimoto, Z.M. Sun, and T. Abe, Scripta Mater. 49, 997 (2003).10.1016/j.scriptamat.2003.08.001 ↗
29. S.D. Mesarovic and N.A. Fleck, Int. J. Solids Struct. 37, 7071 (2000).10.1016/S0020-7683(99)00328-5 ↗
30. F.Q. Yang, L.L. Peng, and K. Okazaki, Metall. Mater. Trans. A 35, 3323 (2004).10.1007/s11661-006-0238-0 ↗
31. F.Q. Yang, L.L. Peng, and K. Okazaki, J. Mater. Res. 19, 1243 (2004).10.1557/JMR.2004.0161 ↗