journal article·2014-11

Effect of Isothermal Aging on the Long-Term Reliability of Fine-Pitch Sn–Ag–Cu and Sn–Ag Solder Interconnects With and Without Board-Side Ni Surface Finish

Tae-Kyu Lee, Jeng-Gong Duh

Journal of Electronic Materials· Volume 43· Issue 11
Publisher page

Abstract

The combined effects on long-term reliability of isothermal aging and chemically balanced or unbalanced surface finish have been investigated for fine-pitch ball grid array packages with Sn–3.0Ag–0.5Cu (SAC305) (wt.%) and Sn–3.5Ag (SnAg) (wt.%) solder ball interconnects. Two different printed circuit board surface finishes were selected to compare the effects of chemically balanced and unbalanced structure interconnects with and without board-side Ni surface finish. NiAu/solder/Cu and NiAu/solder/NiAu interconnects were isothermally aged and thermally cycled to evaluate long-term thermal fatigue reliability. Weibull plots of the combined effects of each aging condition and each surface finish revealed lifetime for NiAu/SAC305/Cu was reduced by approximately 40% by aging at 150°C; less degradation was observed for NiAu/SAC305/NiAu. Further reduction of characteristic life-cycle number was observed for NiAu/SnAg/NiAu joints. Microstructure was studied, focusing on its evolution near the board and package-side interfaces. Different mechanisms of aging were apparent under the different joint configurations. Their effects on the fatigue life of solder joints are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. D.R. Frear and P.T. Vianco, Metall. Trans. A 25A, 1509 (1994).10.1007/BF02665483 ↗
2. J. Glazer, Int. Mater. Rev. 40, 65 (1995).10.1179/imr.1995.40.2.65 ↗
3. H.K. Kim and K.N. Tu, Phys. Rev. B 53, 16027 (1996).10.1103/PhysRevB.53.16027 ↗
4. H. Ma, J.C. Suhling, P. Lall, and M.J. Bozack, Proceeding of the 56th Electronic Components and Technology Conference (May 2006, San Diego, CA).
5. T.-K. Lee, H. Ma, and K.-C. Liu, J. Electron. Mater. 39, 2564 (2010).10.1007/s11664-010-1352-8 ↗
6. M. Mori, K. Miura, T. Sasaki, and T. Ohtsuka, Corros. Sci. 44, 887 (2002).10.1016/S0010-938X(01)00094-4 ↗
7. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
8. B. Liu, T.-K. Lee, and K.-C. Liu, J. Electron. Mater. 40, 2111 (2011).10.1007/s11664-011-1705-y ↗
9. H.G. Song, J.W. Morris Jr, and F. Hua, JOM 56, 30 (2002).10.1007/BF02701846 ↗
10. K.W. Moon, W.J. Boettinger, U.R. Kattner, F.S. Biancaniello, and C.A. Handwerker, J. Electron. Mater. 29, 1122 (2000).10.1007/s11664-000-0003-x ↗
11. W.K. Choi and H.M. Lee, J. Electron. Mater. 29, 1207 (2000).10.1007/s11664-000-0014-7 ↗
12. A.J. Sunwoo, J.W. Morris Jr, and G.K. Lucey Jr, Metall. Trans. A 23A, 1323 (1992).10.1007/BF02665064 ↗
13. Z. Mei and J.W. Morris, J. Electron. Mater. 21, 599 (1992).10.1007/BF02655427 ↗
14. F. Bartels, J.W. Morris Jr, G. Dalke, and W. Gust, J. Electron. Mater. 23, 787 (1994).10.1007/BF02651374 ↗
15. T.-K. Lee, W. Xie, B. Zhou, T. Bieler, and K.-C. Liu, J. Electron. Mater. 40, 1967 (2011).10.1007/s11664-011-1702-1 ↗
16. T.-K. Lee, J. Electron. Mater. 42, 599 (2013).10.1007/s11664-012-2292-2 ↗
17. L.Y. Hsiao, G.Y. Jang, K.J. Wang, and J.G. Duh, J. Electron. Mater. 36, 1476 (2007).10.1007/s11664-007-0282-6 ↗
18. S.‐H. Chae, B. Chao, X. Zhang, J. Imand, and P.S. Ho, Electronic Components and Technology Conference (2007), p. 1442.