journal article·2014-06

Thermoelectric Properties of Highly Deformed and Subsequently Annealed p-Type (Bi0.25Sb0.75)2Te3 Alloys

Sung-Jin Jung, Seong Keun Kim, Hyung-Ho Park, Dow-Bin Hyun, Seung-Hyub Baek, Jin-Sang Kim

Journal of Electronic Materials· Volume 43· Issue 6
Publisher page

Abstract

The effects of mechanical deformation and subsequent annealing on the thermoelectric properties and microstructure have been investigated for p-type (Bi0.25Sb0.75)2Te3 alloys prepared by melting followed by quenching. The mechanically deformed pellets were prepared by repetition of cold-pressing of quenched samples at room temperature. Cold-pressed pellets were then annealed at 300°C in vacuum, and the thermoelectric properties and microstructure were traced through the course of the heat treatment. For the heavily deformed samples, the Seebeck coefficient rapidly increased at the very early stage of annealing and did not change as the annealing time increased, due to recrystallization of a new δ-phase which equilibrated at the annealing temperature of 300°C (δ300-phase). At the initial stage of annealing (recovery stage), the electrical resistivity sharply increased, probably due to the interaction of antistructural defects with vacancies produced during the cold-pressing treatment. However, for the lightly deformed samples, recrystallization occurred only at some portion of the grain boundaries, and the newly generated δ300-phase slowly replaced the original, as-solidified δingot-phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. G. Chen, M.S. Dresselhaus, G. Dresselhaus, J. Fleurial, and T. Caillat, Int. Mater. Rev. 48, 1 (2003).10.1179/095066003225010182 ↗
2. M. Stordeur and H. Sobotta, Proceedings of 1st European Conference on Thermoelectrics, 209 (1988).
3. H. Scherrer and S. Scherrer, CRC Handbook of Thermoelectrics (CRC Press, Inc., 1995), p. 211.
4. W. Liu, X. Yan, G. Chen, and Z. Ren, Nanoenergy 1, 42 (2012).
5. S. Sumithra, N.J. Takas, D.K. Misra, W.M. Nolting, P.F.P. Poudeu, and K.L. Stokes, Adv. Energy Mater. 1, 1141 (2011).10.1002/aenm.201100338 ↗
6. H.J. Goldsmid, Thermoelectric Refrigeration (New York: Plenum, 1964).10.1007/978-1-4899-5723-8 ↗
7. J.R. Sootsman, D.Y. Chung, and M.G. Kanatzidis, Angew. Chem. Int. Ed. 48, 8616 (2009).10.1002/anie.200900598 ↗
8. O.B. Sokolov, S. Ya, Skipidarov, and N.I. Uvankov, J. Cryst. Growth 236, 181 (2000).10.1016/S0022-0248(01)01808-5 ↗
9. X. Tang, W. Xie, H. Li, W. Zhao, Q. Zhang, and M. Niino, Appl. Phys. Lett. 90, 012102 (2007).10.1063/1.2425007 ↗
10. M.H. Ettenberg, J.R. Maddux, P.J. Taylor, W.A. Jesser, and F.D. Rosi, J. Cryst. Growth 179, 495 (1997).10.1016/S0022-0248(97)00133-4 ↗
11. M. Koyano, J. Tanaka, K. Suekuni, and T. Ariga, J.␣Electron. Mater. 41, 1317 (2012).10.1007/s11664-011-1849-9 ↗
12. V.S. Zemskov, A.D. Belaya, U.S. Beluy, and G.N. Kozhemyakin, J. Cryst. Growth 212, 161 (2000).10.1016/S0022-0248(99)00587-4 ↗
13. B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M.S. Dresselhaus, G. Chen, and Z. Ren, Science 320, 634 (2008).10.1126/science.1156446 ↗
14. X. Fan, J.Y. Yang, W. Zhu, S.Q. Bao, X.K. Duan, and Q.Q. Zhang, J. Alloys Compd. 448, 308 (2008).10.1016/j.jallcom.2006.10.062 ↗
15. L.D. Zhao, B.P. Zhang, W.S. Liu, H.L. Zhang, and J.F. Li, J. Alloys Compd. 467, 91 (2009).10.1016/j.jallcom.2007.12.063 ↗
16. Y.L. Li, J. Jiang, G.J. Xu, W. Li, L.M. Zhou, Y. Li, and P. Cui, J. Alloys Compd. 480, 954 (2009).10.1016/j.jallcom.2009.02.097 ↗
17. J. Jiang, T. Aizawa, A. Yamamoto, and T. Ohta, J. Alloys Compd. 309, 225 (2000).10.1016/S0925-8388(00)01063-X ↗
18. W. Xie, J. He, H.J. Kang, X. Tang, S. Zhu, M. Laver, S. Wang, J.R.D. Copley, C.M. Brown, Q. Zhang, and T.M. Tritt, Nano Lett. 10, 3283 (2010).10.1021/nl100804a ↗
19. J.Y. Yang, X.A. Fan, R.G. Chen, W. Zhu, S.Q. Bao, and X.K. Duan, J. Alloys Compd. 416, 270 (2006).10.1016/j.jallcom.2005.08.054 ↗
20. P. Puneet, R. Podila, S. Zhu, M.J. Skove, T.M. Tritt, J. He, and A.M. Rao, Adv. Mater. 25, 1033 (2013).10.1002/adma.201204010 ↗
21. Y.Q. Cao, X.B. Zhao, T.J. Zhu, X.B. Zhang, and J.P. Tu, Appl. Phys. Lett. 92, 143106 (2008).10.1063/1.2900960 ↗
22. Y. Ma, Q. Hao, B. Poudel, Y.C. Lan, B. Yu, D.Z. Wang, G. Chen, and Z.F. Ren, Nano Lett. 8, 2580 (2008).10.1021/nl8009928 ↗
23. J.M. Schultz, J.P. McHugh, and W.A. Tiller, J. Appl. Phys. 33, 2443 (1962).10.1063/1.1728990 ↗
24. T.C. Harman, J.H. Cahn, and M.J. Logan, J. Appl. Phys. 30, 1351 (1959).10.1063/1.1735334 ↗
25. J. Navratil, Z. Stary, and T. Plechacek, Mater. Res. Bull. 31, 1559 (1996).10.1016/S0025-5408(96)00149-3 ↗
26. D.-B Hyun, J.-S. Hwang, J.-D. Shim and T.-S. Oh, J. Mater. Sci. 36, 1285 (2001).
27. D.-B. Hyun, T.-S. Oh, J.-S. Hwang, and J.-D. Shim, Scr. Mater. 44, 455 (2001).10.1016/S1359-6462(00)00631-X ↗
28. Z. Stary, J. Horak, M. Stordeur, and M. Stolzer, J. Phys. Chem. Solids 49, 29 (1988).10.1016/0022-3697(88)90130-8 ↗