Optimization of Thick Photoresist for Uniform Thickness in RF MEMS Applications
Source abstract
Abstract
Micro-electromechanical systems (MEMS)-based devices comprise suspended structures. A sacrificial layer is required to realize these structures. Usually, metal and dielectric materials are used as sacrificial layer materials. Metallic sacrificial material has a selectivity problem, whereas dielectric materials require higher deposition temperatures. Hence, in the present paper, photoresist (PR) material is used as the sacrificial layer. PR requires low-temperature processing and has no selectivity issues. Hence, photoresists are preferred as sacrificial layer materials. In the CMOS fabrication process, thin photoresists such as S1818, S1813, and AZ1505 are used. In these photoresists, the processing wafers are placed in a vertical position during patterning, which occupies less space. The recipes of such photoresists are well optimized for a uniform thickness across the wafer. However, special thick photoresists are used as a sacrificial layer for MEMS devices. These thick photoresists reflow in the vertical position and lead to non-uniform thickness; consequently, the yield is decreased. This paper has optimized a special thick photoresist (HiPR 6517) for RF MEMS SPST switches for better yield and uniformity. The measured pull-in voltage and the switch's resonant frequency are 13.00 V and 12.32 kHz, respectively. The fabricated switch offers isolation and insertion loss better than − 35 dB and − 1 dB at 24.5 GHz, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced MEMS and NEMS Technologies · Acoustic Wave Resonator Technologies · Mechanical and Optical Resonators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. G.M. Rebeiz, RF MEMS (Hoboken: Wiley, 2003). https://doi.org/10.1002/0471225282.10.1002/0471225282 ↗
2. J.C.M. Hwang, Reliability of electrostatically actuated RF MEMS switches, in RFIT 2007—IEEE International Workshop on Radio-Frequency Integration Technology (IEEE, Singapore, 2007), pp. 168–171. https://doi.org/10.1109/RFIT.2007.444394210.1109/RFIT.2007.4443942 ↗
3. D. Bansal, A. Bajpai, P. Kumar, M. Kaur, and K. Rangra, J. Electr. Comput. Eng. (2016). https://doi.org/10.1155/2016/7984548.10.1155/2016/7984548 ↗
4. V. Mulloni, F. Solazzi, G. Resta, F. Giacomozzi, and B. Margesin, Circuit Signal Process 78, 323 (2014). https://doi.org/10.1007/s10470-013-0220-x.10.1007/s10470-013-0220-x ↗
5. J. Robert Reid, L.V.A. Starman, and R.T. Webster, RF actuation of capacitive MEMS switches, in IEEE MTT-S International Microwave Symposium Digest (IEEE, 2003), pp. 1919–1922. https://doi.org/10.1109/mwsym.2003.121053310.1109/mwsym.2003.1210533 ↗
6. M. Angira, and K.J. Rangra, Eng. Sci. Technol. Int. J. 19, 171 (2016). https://doi.org/10.1016/j.jestch.2015.07.001.10.1016/j.jestch.2015.07.001 ↗
7. P.K. Datta, X. Fan, and G. Fischer, IEEE Trans Circuits Syst. II Express Briefs 54, 362 (2007). https://doi.org/10.1109/TCSII.2007.895073.10.1109/TCSII.2007.895073 ↗
8. H. Mirzajani, A.K. Ilkhechi, P. Zolfaghari, M. Azadbakht, E.N. Aghdam, and H.B. Ghavifekr, Microelectron. J. 69, 64 (2017). https://doi.org/10.1016/j.mejo.2017.09.004.10.1016/j.mejo.2017.09.004 ↗
9. H. Qiu, H. Wang, and F. Ke, Sensors (Switzerland) 13, 16360 (2013). https://doi.org/10.3390/s131216360.10.3390/s131216360 ↗
10. C.W. Dyck, T.A. Plut, C.D. Nordquist, P.S. Finnegan, F. Austin, I.C. Reines, and C. Goldsmith, Fabrication and characterization of ohmic contacting RF MEMS switches, in (2004), pp. 5310–534410.1117/12.527984 ↗
11. C. Palego, J. Deng, Z. Peng, S. Halder, J.C.M. Hwang, D.I. Forehand, D. Scarbrough, C.L. Goldsmith, I. Johnston, S.K. Sampath, and A. Datta, IEEE Trans. Microw. Theory Tech. 57, 3262 (2009). https://doi.org/10.1109/TMTT.2009.2033885.10.1109/TMTT.2009.2033885 ↗
12. J. Iannacci, M. Huhn, C. Tschoban, and H. Potter, IEEE Electron Device Lett. 37, 1336 (2016). https://doi.org/10.1109/LED.2016.2604426.10.1109/LED.2016.2604426 ↗
13. M. Angira, Trans. Electr. Electron. Mater. 20, 52 (2019). https://doi.org/10.1007/s42341-018-0077-x.10.1007/s42341-018-0077-x ↗
14. V. Mulloni, F. Giacomozzi, and B. Margesin, Sens. Actuators A Phys. 162, 93 (2010). https://doi.org/10.1016/j.sna.2010.06.013.10.1016/j.sna.2010.06.013 ↗
15. Y. Jang, S. Kang, H.C. Kim, and K. Chun, J. Micromech. Microeng. 21, 075016 (2011). https://doi.org/10.1088/0960-1317/21/7/075016.10.1088/0960-1317/21/7/075016 ↗
16. C. Villeneuve, P. Pons, V. Puyal, and R. Plana, J. Micromech. Microeng. 20, 064013 (2010). https://doi.org/10.1088/0960-1317/20/6/064013.10.1088/0960-1317/20/6/064013 ↗
17. K. Srinivasa Rao, L.N. Thalluri, K. Guha, and K. Girija Sravani, IEEE Access 6, 77519 (2018). https://doi.org/10.1109/ACCESS.2018.2883353.10.1109/ACCESS.2018.2883353 ↗
18. P. Kumar, D. Bansal, A. Kumar, A. Bajpai, K. Mehta, Ashudeep, K. Rangra, and D. Boolchandani, Microsyst. Technol. (2020). https://doi.org/10.1007/s00542-020-05000-7.10.1007/s00542-020-05000-7 ↗
19. C.L. Goldsmith, Z. Yao, S. Eshelman, and D. Denniston, IEEE Microw. Guid. Wave Lett. 8, 269 (1998). https://doi.org/10.1109/75.704410.10.1109/75.704410 ↗
20. B. Liu, Z. Lv, Z. Li, X. He, and Y. Hao, A surface micromachining process utilizing dual metal sacrificial layer for fabrication of RF MEMS switch, in 2010 IEEE 5th International Conference Nano/Micro Engineered and Molecular Systems NEMS 2010 (IEEE, 2010), pp. 620–623. https://doi.org/10.1109/NEMS.2010.559247910.1109/NEMS.2010.5592479 ↗
21. Y. Liu, Y. Bey, and X. Liu, IEEE Trans. Microw. Theory Tech. 64, 3151 (2016). https://doi.org/10.1109/TMTT.2016.2598170.10.1109/TMTT.2016.2598170 ↗
22. A.J. Dowling, M.K. Ghantasala, J.P. Hayes, E.C. Harvey, and E.D. Doyle, Smart Mater. Struct. 11, 715 (2002). https://doi.org/10.1088/0964-1726/11/5/314.10.1088/0964-1726/11/5/314 ↗
23. J. Yang, Y. Shi, H. Zhong, X. Jiao, R. Zhang, and B. Du, Microsyst. Technol. 20, 259 (2014). https://doi.org/10.1007/s00542-013-1946-1.10.1007/s00542-013-1946-1 ↗
24. A. Bertacchini, S. Scorcioni, D. Dondi, L. Larcher, P. Pavan, M.T. Todaro, A. Campa, G. Caretto, S. Petroni, A. Passaseo, and M. De Vittorio, AlN-based MEMS devices for vibrational energy harvesting applications, in Europena Solid-State Device Research Conference (IEEE, 2011), pp. 119–122. https://doi.org/10.1109/ESSDERC.2011.604422010.1109/ESSDERC.2011.6044220 ↗
25. P. Ekkels, R.W. Tjerkstra, G.J.M. Krijnen, J.W. Berenschot, J. Brugger, and M.C. Elwenspoek, Microelectron. Eng. 67–68, 422 (2003). https://doi.org/10.1016/S0167-9317(03)00098-4.10.1016/S0167-9317(03)00098-4 ↗
26. S. Evoy, D.W. Carr, L. Sekaric, A. Olkhovets, J.M. Parpia, and H.G. Craighead, J. Appl. Phys. 86, 6072 (1999). https://doi.org/10.1063/1.371656.10.1063/1.371656 ↗
27. A. Sharma, P. Jhanwar, D. Bansal, A. Kumar, M. Kaur, S. Pandey, P. Kumar, D. Kumar, and K. Rangra, J. Micro/Nanolithogr. MEMS MOEMS 13, 013005 (2014). https://doi.org/10.1117/1.jmm.13.1.013005.10.1117/1.jmm.13.1.013005 ↗
28. I.E. Obuh, V. Doychinov, D.P. Steenson, P. Akkaraekthalin, I.D. Robertson, and N. Somjit, IEEE Trans. Compon. Packag. Manuf. Technol. 8, 1702 (2018). https://doi.org/10.1109/TCPMT.2018.2834865.10.1109/TCPMT.2018.2834865 ↗
29. M.J. Madou, Fundamentals of Microfabrication, 2nd ed., (Boca Raton: CRC Press, 2002). https://doi.org/10.1201/9781482274004.10.1201/9781482274004 ↗
30. D. Bansal, A. Bajpai, P. Kumar, M. Kaur, and A. Kumar, IEEE Trans. Electron Devices 67, 2147–2152 (2020). https://doi.org/10.1109/TED.2020.2982667.10.1109/TED.2020.2982667 ↗