Electrical and Mechanical Properties of ZrO2-Y2O3-Al2O3 Composite Solid Electrolytes
Source abstract
Abstract
Abstract Strategic priorities in the field of hydrogen energy include the design of intermediate-temperature solid oxide fuel cells capable of highly efficient operation in the temperature range of 573–973 K. Consequently, attempts are being made to replace the widely applied cubic zirconia electrolyte with an electrolyte consisting of tetragonal zirconia. The rationale for this approach is that 3Y-TZP exhibits higher mechanical strength and higher electrical conductivity at temperatures below 973 K. The addition of Al2O3in an amount that exceeds its solubility limit in 3Y-TZP has been found to result in increased electrical conductivity and improved mechanical properties. The aim of the study was to synthesize 3-YSZ powder via co-precipitation and use it to obtain composites with a 3Y-TZP matrix and 0.5 mol.% or 1.0 mol.% of Al2O3inclusions. The correlation between these samples' electrical conductivity and resistance to brittle fracture and their phase composition and microstructure was investigated by means of X-ray diffractometry, scanning electron microscopy, electrochemical impedance spectroscopy and Vickers indentation tests. For comparison, the properties of composites with an 8-YSZ matrix and Al2O3inclusions were also investigated. It was determined that the composite based on the 3Y-TZP matrix and containing 0.5 mol.% of Al2O3inclusions can be considered a viable alternative for 8-YSZ electrolytes in IT-SOFC applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Z. Fang, R.L. Smith Jr., and X. Qi, Production of Hydrogen from Renewable Resources (Dordrecht: Springer, 2015).10.1007/978-94-017-7330-0 ↗
2. Y. Shi, N. Cai, T. Cao, and J. Zhang, High-Temperature Electrochemical Energy Conversion and Storage. Fundamentals and Applications (Boca Raton: CRC Press, 2018).
3. K. Kendall and M. Kendall, High-Temperature Solid Oxide Fuel Cells for the 21st Century, Fundamentals, Design and Applications (London: Elsevier, 2016).
4. N.Q. Minh, Solid State Ion. 174, 271 (2004).10.1016/j.ssi.2004.07.042 ↗
5. J. Huanga, F. Xie, Ch. Wang, and Z. Mao, Int. J. Hydrog. Energy 37, 877 (2012).10.1016/j.ijhydene.2011.04.030 ↗
6. S.P.S. Badwal and M.V. Swain, J. Mater. Sci. Lett. 4, 487 (1985).10.1007/BF00719752 ↗
7. M. Rűhle, N. Claussen, and A.H. Heuer, Advances in Ceramics vol. 12: Science and Technology of Zirconia II. ed. N. Clausen, M. Rűhle, and A.H. Heuer (Columbus: The American Ceramic Society, 1984), p. 352.
8. X. Guo and Z. Zhang, Acta Mater. 51, 2539 (2003).10.1016/S1359-6454(03)00052-1 ↗
9. E.P. Butler and J. Drennan, J. Am. Ceram. Soc. 65, 474 (1982).10.1111/j.1151-2916.1982.tb10336.x ↗
10. J.E. Bauerle, J. Phys. Chem. Solids 30, 2657 (1969).10.1016/0022-3697(69)90039-0 ↗
11. L.M. Navarro, P. Recio, J.R. Jurado, and P. Duran, J. Mater. Sci. 30, 1949 (1995).10.1007/BF00353017 ↗
12. M. Miyayama, H. Yanagida, and A. Asada, Am. Ceram. Soc. Bull. 64, 660 (1985).
13. I.M. Ross, W.M. Rainforth, D.W. McComb, A.J. Scott, and R. Brydson, Scr. Mater. 45, 653 (2001).10.1016/S1359-6462(01)01076-4 ↗
14. X. Guo, Phys. Status Solidi (A) 183, 261 (2001).10.1002/1521-396X(200102)183:2<261::AID-PSSA261>3.0.CO;2-2 ↗
15. K. Obal, Z. Pedzich, T. Brylewski, and M. Rękas, Int. J. Electrochem. Sci. 7, 6831 (2012).10.1016/S1452-3981(23)15751-8 ↗
16. A.J. Feighery and J.T.S. Irvine, Solid State Ion. 121, 209 (1999).10.1016/S0167-2738(99)00015-6 ↗
17. S. Rajendran, J. Drennan, and S.P.S. Badwal, J. Mater. Sci. Lett. 6, 1431 (1987).10.1007/BF01689312 ↗
18. M.J. Verkerk, A.J.A. Vinnubst, and A.J. Burggraaf, J. Mater. Sci. 17, 3113 (1982).10.1007/BF01203473 ↗
19. X. Guo, W. Sigle, J. Fleig, and J. Maier, Solid State Ion. 154–155, 555 (2002).10.1016/S0167-2738(02)00491-5 ↗
20. Y. Ji, J. Liu, Z. Lu, X. Zhao, T. He, and W. Su, Solid State Ion. 126, 277 (1999).10.1016/S0167-2738(99)00247-7 ↗
21. A. Yuzaki, A. Kishimoto, and Y. Nakamura, Solid State Ion. 109, 273 (1998).10.1016/S0167-2738(98)00086-1 ↗
22. R.C. Agrawal and R.K. Gupta, J. Mater. Sci. 34, 1131 (1999).10.1023/A:1004598902146 ↗
23. B.Q. Minh, J. Am. Ceram. Soc. 76, 563 (1993).10.1111/j.1151-2916.1993.tb03645.x ↗
24. M. Mori, T. Abe, H. Itoh, O. Yamamoto, Y. Takeda, and T. Kawahara, Solid State Ion. 74, 157 (1994).10.1016/0167-2738(94)90206-2 ↗
25. K. Oe, K. Kikkawa, A. Kishimoto, Y. Nakamura, and H. Yanagida, Solid State Ion. 91, 131 (1996).10.1016/S0167-2738(96)00417-1 ↗
26. P. Duran, L.M. Navarro, P. Recio, and J.R. Jurado, Eur. J. Solid State Inorg. Chem. 32, 963 (1995).
27. S.R. Choi and N.P. Bansal, Ceram. Int. 31, 39 (2005).10.1016/j.ceramint.2004.03.032 ↗
28. S. Tekeli, Compos. Sci. Technol. 65, 967 (2002).10.1016/j.compscitech.2004.10.024 ↗
29. M.M. Bućko and W. Pyda, J. Mater. Sci. 40, 5191 (2005).10.1007/s10853-005-4412-3 ↗
30. O. Vasylkiv, Y. Sakka, and V.V. Skorokhod, J. Am. Ceram. Soc. 86, 299 (2003).10.1111/j.1151-2916.2003.tb00015.x ↗
31. Y. Sakka and K. Hiraga, Nippon Kagaku Kaishi 8, 497 (1999).10.1246/nikkashi.1999.497 ↗
32. Y. Sakka, T.S. Suzuki, K. Morita, K. Nakano, and K. Hiraga, Scr. Mater. 44, 2075 (2001).10.1016/S1359-6462(01)00889-2 ↗
33. T.S. Suzuki, Y. Sakka, K. Morita, and K. Hiraga, Scr. Mater. 43, 705 (2000).10.1016/S1359-6462(00)00469-3 ↗
34. A. Heuer, J. Am. Ceram. Soc. 70, 689 (1987).10.1111/j.1151-2916.1987.tb04865.x ↗
35. M. Kihara, T. Ogata, K. Nakamura, and K. Kobayashi, J. Ceram. Soc. Jpn. 96, 646 (1988).10.2109/jcersj.96.646 ↗
36. M. Fukuhara, J. Am. Ceram. Soc. 72, 236 (1989).10.1111/j.1151-2916.1989.tb06107.x ↗
37. S. Bhaduri, S.B. Bhaduri, and E. Zhou, J. Mater. Res. 13, 156 (1998).10.1557/JMR.1998.0021 ↗
38. F.J. Esper, K.H. Friese, and H. Geier, Advances in Ceramics vol. 12: Science and Technology of Zirconia II. ed. N. Clausen, M. Rűhle, and A.H. Heuer (Columbus: The American Ceramic Society, 1984), p. 528.
39. E. Drożdż-Cieśla, J. Wyrwa, W. Pyda, and M. Rękas, J. Mater. Sci. 47, 2807 (2012).10.1007/s10853-011-6109-0 ↗
40. M.C. Martin and M.L. Mecartney, Solid State Ion. 161, 67 (2003).10.1016/S0167-2738(03)00265-0 ↗
41. E. Barsoukov and J.R. Macdonald, Impedance Spectroscopy: Theory, Experiment and Applications (Hoboken: Wiley, 2005).10.1002/0471716243 ↗
42. T. Bak, J. Nowotny, K. Prince, M. Rekas, and C.C. Sorrell, J. Am. Ceram. Soc. 85, 2244 (2002).10.1111/j.1151-2916.2002.tb00442.x ↗
43. K. Niihara, J. Mater. Sci. Lett. 2, 221 (1983).10.1007/BF00725625 ↗
44. M.W. Barsoum, Fundamentals of Ceramics (New York: Taylor & Francis Group, 2003).10.1887/0750309024 ↗
45. P. Scherrer, Göttinger Nachrichten Gesell. 2, 98 (1918).
46. L.V. Azaroff, Introduction of Solids (New York: Mc Graw Hill Book Company Inc., 1960).
47. J.J. Swab, J. Mater. Sci. 26, 6706 (1991).10.1007/BF02402664 ↗
48. X. Guo, Chem. Mater. 16, 3988 (2004).10.1021/cm040167h ↗
49. Y.-M. Chiang, D.P. Birnie, and W.D. Kingery, Physical Ceramics. Principles for Ceramic Science and Engineering (New York: John Wiley & Sons, Inc., 1997).
50. M.M. Bućko, Zirconium Dioxide as Solid Electrolyte—Properties Modification, Papers of the Commision on Ceramic Science Polish Ceramic Bulletin Ceramics (Kraków: Wydawnictwo Naukowe “Akapit,” 2007). (in Polish).