Tuning Stress in Cu Thin Films by Developing Highly (111)-Oriented Nanotwinned Structure
Source abstract
Abstract
We have examined the effect of different bath temperatures on residual stress of both the random-oriented Cu films and the highly (111)-oriented nanotwinned Cu films by synchrotron radiation x-ray measurements. The bath temperature varied from 15°C to 40°C. The results indicate that the average residual stress in the highly (111)-oriented nanotwinned films is higher than that in the randomly oriented Cu films. However, the stress in the highly (111)-oriented Cu decreases with increasing bath temperature. The average residual stress can be reduced from 253 MPa electroplated at 15°C to 95 MPa under a bath temperature of 35°C. We could successfully tune and measure residual stress of the Cu thin films. The films with low residual stress prevent warpage from occurring on the substrate and lower the processing failure in copper direct bonding and other processes that need alignment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Metal and Thin Film Mechanics · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. R.R. Schaller, IEEE Spectr. 34, 52 (1997).10.1109/6.591665 ↗
2. V.S. Rao, C.T. Chong, D. Ho, D.M. Zhi, C.S. Choong, S.L. Ps et al., Development of high density fan out wafer level package (HD FOWLP) with multi-layer fine pitch RDL for mobile applications, in 2016 IEEE 66th Electronic Components and Technology Conference (ECTC) (2016), pp. 1522–1529. IEEE10.1109/ECTC.2016.203 ↗
3. J.H. Lau, 3D IC heterogeneous integration by FOWLP.Fan-Out Wafer-Level Packaging, ed. J.H. Lau (Singapore: Springer, 2018), pp. 269–303.10.1007/978-981-10-8884-1_11 ↗
4. J.H. Lau, M. Li, D. Tian, N. Fan, E. Kuah, W. Kai, M. Li, J. Hao, Y.M. Cheung, Z. Li, and K.H. Tan, IEEE Trans. Compon. Packag. Manuf. Technol. 7, 1729 (2017).10.1109/TCPMT.2017.2715185 ↗
5. G. Schlottig, A. Xiao, H. Pape, B. Wunderle, and L.J. Ernst, Interfacial strength of silicon-to-molding compound changes with thermal residual stress, in 2010 11th International Thermal, Mechanical & Multi-Physics Simulation, and Experiments in Microelectronics and Microsystems (EuroSimE) (2010), pp. 1–5. IEEE10.1109/ESIME.2010.5464554 ↗
6. J. Xi, D. Yang, L. Bai, X. Zhai, F. Xiao, H. Guo et al., Reliability of RDL structured wafer level packages, in 2013 14th International Conference on Electronic Packaging Technology (2013), pp. 1029–1032. IEEE10.1109/ICEPT.2013.6756634 ↗
7. L. Lu, Y. Shen, X. Chen, L. Qian, and K. Lu, Science 304, 422 (2004).10.1126/science.1092905 ↗
8. D. Xu, V. Sriram, V. Ozolins, J.M. Yang, K.N. Tu, G.R. Stafford, C. Beauchamp, I. Zienert, H. Geisler, P. Hofmann, and E. Zschech, Microelectron. Eng. 85, 2155 (2008).10.1016/j.mee.2008.04.035 ↗
9. L. Lu, X. Chen, X. Huang, and K. Lu, Science 323, 607 (2009).10.1126/science.1167641 ↗
10. E. Ma, Y.M. Wang, Q.H. Lu, M.L. Sui, L. Lu, and K. Lu, Appl. Phys. Lett. 85, 4932 (2004).10.1063/1.1814431 ↗
11. R. Rosenberg, D.C. Edelstein, C.K. Hu, and K.P. Rodbell, Annu. Rev. Mater. Sci. 30, 229 (2000).10.1146/annurev.matsci.30.1.229 ↗
12. K.C. Chen, W.W. Wu, C.N. Liao, L.J. Chen, and K.N. Tu, Science 321, 1066 (2008).10.1126/science.1160777 ↗
13. K.C. Chen, W.W. Wu, C.N. Liao, L.J. Chen, and K.N. Tu, J. Appl. Phys. 108, 066103 (2010).10.1063/1.3483949 ↗
14. I.H. Tseng, Y.J. Li, B. Lin, C.C. Chang, and C. Chen, High electromigration lifetimes of nanotwinned Cu redistribution lines, in 2019 IEEE 69th Electronic Components and Technology Conference (ECTC) (2019), pp. 1328–1332. IEEE10.1109/ECTC.2019.00206 ↗
15. Y.S. Huang, C.M. Liu, W.L. Chiu, and C. Chen, Scripta Mater. 89, 5 (2014).10.1016/j.scriptamat.2014.06.008 ↗
16. C.H. Tseng, K.N. Tu, and C. Chen, Sci. Rep. 8, 1 (2018).10.1038/s41598-017-17765-5 ↗
17. Yen-Chieh Chen and Chih Chen, Study of Electrodeposition of Nanotwinned Cu Films at Different Bath Temperatures (Hsinchu: Department of Materials Science and Engineering, National Chiao Tung University, 2017), p. 78.
18. A.F. Burnett and J.M. Cech, J. Vac. Sci. Technol. A Vac. Surf. Films 11, 2970 (1993).10.1116/1.578677 ↗
19. M.N. James, Eng. Fail. Anal. 18, 1909 (2011).10.1016/j.engfailanal.2011.06.005 ↗
20. C.M. Liu, H.W. Lin, C.L. Lu, and C. Chen, Sci. Rep. 4, 6123 (2014).10.1038/srep06123 ↗
21. A.N. Wang, C.P. Chuang, G.P. Yu, and J.H. Huang, Surf. Coat. Technol. 262, 40 (2015).10.1016/j.surfcoat.2014.12.009 ↗
22. C.H. Ma, J.H. Huang, and H. Chen, Thin Solid Films 418, 73 (2002).10.1016/S0040-6090(02)00680-6 ↗
23. Y. Zhou, C.S. Yang, J.A. Chen, G.F. Ding, W. Ding, L. Wang, M.J. Wang, Y.M. Zhang, and T.H. Zhang, Thin Solid Films 460, 175 (2004).10.1016/j.tsf.2004.01.088 ↗
24. W. Köster and H. Franz, Metall. Rev. 6, 1 (1961).10.1179/095066061790425893 ↗
25. E. Chason, J.W. Shin, S.J. Hearne, and L.B. Freund, J. Appl. Phys. 111, 083520 (2012).10.1063/1.4704683 ↗
26. E. Chason, B.W. Sheldon, L.B. Freund, J.A. Floro, and S.J. Hearne, Phys. Rev. Lett. 88, 156103 (2002).10.1103/PhysRevLett.88.156103 ↗
27. R. Treml, D. Kozic, J. Zechner, X. Maeder, B. Sartory, H.P. Gänser, R. Schöngrundner, J. Michler, R. Brunner, and D. Kiener, Acta Mater. 103, 616 (2016).10.1016/j.actamat.2015.10.044 ↗
28. R.M. Keller, S.P. Baker, and E. Arzt, J. Mater. Res. 13, 1307 (1998).10.1557/JMR.1998.0186 ↗
29. T. Hanabusa, K. Kusaka, and O. Sakata, Thin Solid Films 459, 245 (2004).10.1016/j.tsf.2003.12.102 ↗
30. R.P. Vinci, E.M. Zielinski, and J.C. Bravman, Thin Solid Films 262, 142 (1995).10.1016/0040-6090(95)05834-6 ↗