Realistic Creep Characterization for Sn3.0Ag0.5Cu Solder Joints in Flip Chip BGA Package
Source abstract
Abstract
Creep tests were performed using a fixture composed of a spring, a micrometer and a heating pad to apply both heat and constant compressive load and elevated temperature to the actual solder joint. A microscopic digital image correlation technique was used to measure creep strains. A full-field deformation map of the cross-sectioned solder joint was generated as different constant loads were applied under different isothermal conditions on Sn3.0Ag0.5Cu flip chip ball grid array solder joints. Nonlinear regression was used to generate constitutive properties using the Garofalo hyperbolic sine model. The obtained constitutive properties were used to perform a finite element analysis simulation to compare the model with experimental results, which showed good agreement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. S. Mukherjee, M. Nuhi, A. Dasgupta, and M. Modarres, ASME J. Electron. Packag. 138, 030801 (2016). 10.1115/1.4033375 .10.1115/1.4033375 ↗
2. T.R. Bieler, H. Jiang, L.P. Lehman, T. Kirkpatrick, and E.J. Cotts, IEEE Trans. Compon. Packag. Technol. 31, 370 (2008).10.1109/TCAPT.2008.916835 ↗
3. B. Guo, A. Kunwar, H. Ma, J. Liu, S. Li, J. Sun, N. Zhao, and H. Ma, in 16th International Conference on Electronic Packaging Technology (2015).
4. J.H. Lau and S.H. Pan, Int. J. Microcirc. Electron. Packag 24, 1 (2001).
5. E.H. Amalu and N.N. Ekere, J. Manuf. Syst. 39, 9 (2016).10.1016/j.jmsy.2016.01.002 ↗
6. A. Schubert, R. Dudek, E. Auerswald, A. Gollhardt, B. Michel, and H. Reichl, in IEEE, 53rd Electronic Components and Technology Conference, New Orleans, LA, 27–30 May 2003, pp. 603–610 (2003).
7. R. Darveaux and K. Banerji, IEEE Trans. Compon. Hybrids Manuf. Technol. 15, 1013 (1992).10.1109/33.206925 ↗
8. J.H. Lau, Ball Grid Array Technology (New York: McGraw-Hill Inc, 1994).
9. P.T. Vianco, J.A. Rejent, and A.C. Kilgo, J. Electron. Mater. 33, 1389 (2004).10.1007/s11664-004-0169-8 ↗
10. Y. Sun and J.H.L. Pang, Microelectron. Reliab. 48, 310 (2008).10.1016/j.microrel.2007.03.007 ↗
11. D. Herkommer, M. Reid, and J. Punch, J. Electron. Mater. 38, 2085 (2009).10.1007/s11664-009-0885-1 ↗
12. D. Herkommer, J. Punch, and M. Reid, Microelectron. Reliab. 50, 116 (2010).10.1016/j.microrel.2009.08.008 ↗
13. D. Herkommer, J. Punch, and M. Reid, IEEE Trans. Compon. Packag. Manuf. Technol. 3, 275 (2013).10.1109/TCPMT.2012.2227481 ↗
14. G. Cuddalorepatta and A. Dasgupta, Acta Materilia 58, 5989 (2010).10.1016/j.actamat.2010.07.016 ↗
15. S. Wiese, M. Roellig, M. Mueller, S. Rzepka, K. Nocke, C. Luhmann, F. Kraemer, K. Meier, and K.J. Wolter, in IEEE, 1st Electronics System integration Technology Conference, Dresden, Germany, 5–7 Sep 2006.
16. Q. Xiao and W.D. Armstrong, J. Electron. Mater. 34, 196 (2005).10.1007/s11664-005-0233-z ↗
17. J. Kwak, J. Mech. Sci. Technol. 28, 4899 (2014).10.1007/s12206-014-1109-z ↗
18. P. Lall, K. Mirza, and J. Suhling, in 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, pp. 519–529 (2016).
19. P. Lall, D. Zhang, V. Yadav, and D. Locker, Microelectron. Reliab. 62, 4 (2016).10.1016/j.microrel.2016.03.014 ↗
20. S. Hamada, T. Fujisawa, M. Koyama, N. Koga, N. Nakada, T. Tsuchiyama, M. Ueda, and H. Noguchi, Mater. Charact. 98, 140 (2014).10.1016/j.matchar.2014.10.010 ↗
21. J. Sun, L. Jin, J. Dong, W. Ding, and A.A. Luo, Mater. Charact. 119, 195 (2016).10.1016/j.matchar.2016.08.003 ↗
22. D. Lunt, A. Orozco-Caballero, R. Thomas, P. Honniball, P. Frankel, M. Preuss, and J. Quinta da Fonseca, Mater. Charact. 139, 355 (2018).10.1016/j.matchar.2018.03.014 ↗
23. R.D. Pendse and P. Zhou, Microelectron. Reliab. 42, 301 (2002).10.1016/S0026-2714(01)00130-5 ↗
24. S. Park, R. Dhakal, L. Lehman, and E.J. Cotts, Acta Mater. 55, 3253 (2007).10.1016/j.actamat.2007.01.028 ↗
25. K.A. Kasvayee, E. Ghassemali, K. Salomonsson, S. Sujakhu, S. Castagne, and A.E.W. Jarfors, Mater. Charact. 140, 333 (2018).10.1016/j.matchar.2018.04.017 ↗
26. Y. Yuan, J. Huang, X. Peng, C. Xiong, J. Fang, and F. Yuan, Opt. Lasers Eng. 52, 75 (2014).10.1016/j.optlaseng.2013.07.016 ↗
27. Y. Yuan, Q. Zhan, C. Xiong, and J. Huang, Opt. Lasers Eng. 97, 52 (2017).10.1016/j.optlaseng.2017.05.010 ↗
28. D. Lecompte, A.S. Smits, S. Bossuyt, H. Sol, J. Vantomme, D. Van Hemelrijck, and A.M. Habraken, Opt. Lasers Eng. 44, 1132 (2006).10.1016/j.optlaseng.2005.10.004 ↗