journal article·2019-04

Combined Numerical and Experimental Investigation on the Optimum Coolant Flow Rate for Automotive Thermoelectric Generators

Xingxing Lei, Yiping Wang, Yadong Deng, Chuqi Su, Xun Liu, Guangyao Chen

Journal of Electronic Materials· Volume 48· Issue 4
Publisher page

Abstract

In a water-cooled thermoelectric generator (TEG) system, there is an energy-consuming circulating water pump. In order to reduce pump energy consumption caused by backpressure and increase the output power of the entire system, combining numerical simulation and experimentation is adopted to explore the suitable coolant flow rate. Due to the limitations of the experimental conditions, numerical simulation is used to compute the temperature distribution and flow field inside the TEG. Base on the numerical results and the empirical formula, the circulating pump energy consumption is calculated. The maximum power output of the thermoelectric module (TEM) at the corresponding temperature difference is obtained by experiment. Finally, the maximum net output power of the module is revealed and the relationship between the coolant flow rate and average temperature of the hot end of the TEMs is proposed, which can serve as a theoretical basis for cooling water flow rate management of the TEG system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Heat Transfer and Optimization · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. A. Gabriel-Buenaventura and B. Azzopardi, Renew. Sustain. Energy. Rev. 41, 955 (2015).10.1016/j.rser.2014.08.083 ↗
2. S. Li, Y.P. Wang, T. Wang, X. Yang, Y.D. Deng, and C.Q. Su, J. Electron. Mater. 46, 1 (2016).
3. C. Liu, Y.D. Deng, X.Y. Wang, X. Liu, Y.P. Wang, and C.Q. Su, Appl. Therm. Eng. 108, 916 (2016).10.1016/j.applthermaleng.2016.07.175 ↗
4. I.C. Silva Jr., F.R.D. Nascimento, E.J.D. Oliveira, A.L.M. Marcato, and L.W.D. Oliveira, Int. J. Elec. Power 44, 134 (2013).10.1016/j.ijepes.2012.07.036 ↗
5. X.H. Yuan, W.R. Bai, Y.D. Deng, C.Q. Su, X. Liu, C.H. Liu, and Y.P. Wang, J. Renew. Sustain. Energy 8, 816 (2016).
6. Y.Y. Hsiao, W.C. Chang, and S.L. Chen, Energy 35, 1447 (2010).10.1016/j.energy.2009.11.030 ↗
7. Y.C. Wang, C.S. Dai, and S.X. Wang, Appl. Energy 112, 1171 (2013).10.1016/j.apenergy.2013.01.018 ↗
8. X.L. Gou, H. Xiao, and S.W. Yang, Appl. Energy 87, 3131 (2010).10.1016/j.apenergy.2010.02.013 ↗
9. C. Amaral, C. Brandão, V.S. Éric, and F.J. Lesage, Appl. Therm. Eng. 65, 94 (2014).10.1016/j.applthermaleng.2013.12.044 ↗
10. S.C. Tzeng, T.M. Jen, and Y.L. Lin, Int. Commun. Heat Mass Transfer 52, 97 (2014).10.1016/j.icheatmasstransfer.2014.01.021 ↗
11. Y.P. Wang, S. Li, X. Yang, Y.D. Deng, and C.Q. Su, J. Electron. Mater. 45, 1 (2015).
12. C.Q. Su, M. Xu, W.S. Wang, Y.D. Deng, X. Liu, and Z.B. Tang, J. Electron. Mater. 44, 1 (2015).10.1007/s11664-014-3403-z ↗
13. J.H. Meng, X.D. Wang, and W.H. Chen, Energy Convers. Manag. 120, 71 (2016).10.1016/j.enconman.2016.04.080 ↗
14. C.Q. Su, D.C. Zhu, Y.D. Deng, Y.P. Wang, and X. Liu, J. Electron. Mater. 46, 1 (2016).
15. M. Hatami, D.D. Ganji, and M. Gorji-Bandpy, Energy. Convers. Manag. 97, 26 (2015).10.1016/j.enconman.2015.03.032 ↗
16. Z.B. Tang, Y.D. Deng, C.Q. Su, and X.H. Yuan, J. Electron. Mater. 44, 1554 (2015).10.1007/s11664-014-3472-z ↗
17. Y.P. Wang, S. Li, Y.F. Zhang, X. Yang, Y.D. Deng, and C.Q. Su, Energy. Convers. Manag. 126, 266 (2016).10.1016/j.enconman.2016.08.009 ↗
18. Y.D. Deng, S.J. Zheng, C.Q. Su, X.H. Yuan, C.G. Yu, and Y.P. Wang, J. Electron. Mater. 45, 1740 (2015).10.1007/s11664-015-4194-6 ↗