Effects of α-Fe2O3 Additions on Assembly Reliability of Electroplated Sn-Based Solder Cap on Cu Pillar Bump During Thermal Cycling
Source abstract
Abstract
Composite solder alloys reinforced by different nominal concentrations of α-Fe2O3 nanoparticles are examined and the performance of corresponding copper (Cu) pillar bumps during thermal cycling (TC) tests is investigated. Firstly, the spherical α- Fe2O3 nanoparticles (50 nm in diameter) were successfully prepared by a chemical method. Then, the Sn-xFe2O3 composite solders with different concentrations of α-Fe2O3 were deposited on the surface of Cu pillar bumps by electroplating. During electroplating, the concentration of α-Fe2O3 nanoparticles in the plating solution ranged from 0 g/L to 0.04 g/L. TC tests of fabricated joints were conducted from − 65°C to 150°C for different numbers of cycles. The microstructure, evolution of interfacial intermetallic compounds (IMCs) and the shear strength of the solder joints were investigated following TC tests. Cross-sectional analysis indicates that adding α-Fe2O3 nanoparticles can remarkably suppress the overgrowth of the interfacial IMCs. Compared to the strength of joint without nanoparticles after the TC test, the strength of joints increases with the addition of α-Fe2O3 and an optimum nominal concentration of 0.032 g/L in the electroplating solution was identified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K.M. Chen and T.S. Lin, J. Mater. Sci-Mater. Electron. 21, 278–284 (2010).10.1007/s10854-009-9905-4 ↗
2. K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 55–105 (2002).10.1016/S0927-796X(02)00007-4 ↗
3. Z. Kornain, A. Jalar, N. Amin, R. Rasid, and C.S. Foong, Am. J. Eng. App. Sci. 3, 83–89 (2010).10.3844/ajeassp.2010.83.89 ↗
4. A. Bao, L. Zhao, Y.Y. Sun, M. Han, G. Yeap, S. Bezuk, P. Holmes, C. Alcira, X.F. Zhang, and K. Lee. ECTC 64, 47–49 (2014).
5. M.A.J. van Gils, O. van der Sluis, G.Q. Zhang, J.H.J. Janssen, and R.M.J. Voncken, Microelectron. Reliab. 47, 179–186 (2007).10.1016/j.microrel.2006.09.003 ↗
6. Y.H. Ko, M.S. Kim, J.H. Bang, T.S. Kim, and C.W. Lee, J. Electron. Mater. 44, 2458–2466 (2015).10.1007/s11664-015-3781-x ↗
7. B. Ebersberger and C. Lee, ECTC 58, 59–66 (2008).10.3406/annor.2008.6194 ↗
8. M.W. Lee, J.Y. Kom, J. D. Kim, and C.H. Lee, ECTC 60, 1623–1630 (2010).
9. J.-W. Nah, M. Gaynes, E. Perfecto, and C. Feger. ECTC 62, 1233–1238 (2012).
10. J.W. Nah, J.O. Suh, K.N. Tu, Y.S. Wook, R.V. Srinivasa, K. Vaidyanathan, and H. Fay, J. Appl. Phys. 100, 123513 (2006).10.1063/1.2402475 ↗
11. A. Syed, K. Dhandapani, R. Moody, L. Nicholls, and M. Kelly, ECTC 61, 332–339 (2011).
12. J.C. Lin, Y. Qin, and J. Woertink, J. Electron. Mater. 43, 4134–4145 (2014).10.1007/s11664-014-3318-8 ↗
13. F. Kuechenmeister, D. Breuer, H. Geisler, J. Paul, C. Shah, K.V. Machani, S. Kosgalwies, R. Agarwal, and S. Gao, ECTC 14, 430–436 (2012).
14. G.T. Wang, P.S. Ho, and S. Groothuis, Microelectron. Reliab. 45, 1079–1093 (2005).10.1016/j.microrel.2004.12.008 ↗
15. C.C. Lee, T.L. Chou, C.C. Chiu, C.C. Hsia, and K.N. Chiang, Microelectron. Eng. 85, 2079–2084 (2008).10.1016/j.mee.2008.04.006 ↗
16. F.X. Che, J.K. Lin, K.Y. Au, H.Y. Hsiao, and X.W. Zhang, Pack. Man. Technol. 5, 1273–1283 (2015).
17. V. Solberg and V. Oganesian, CPMT Symposium Japan 1–4 (2010).10.1109/CPMTSYMPJ.2010.5679659 ↗
18. Y. Gu, X.C. Zhao, Y. Li, Y. Liu, Y. Wang, and Z.Y. Li, J. Alloys Compd. 627, 39–47 (2015).10.1016/j.jallcom.2014.12.024 ↗
19. W.S. Rasband, U.S. Natutestional Institute of Health, Bethesda, Maryland, USA, 1997–2012. http://imagej.nih.gov/ij/ .
20. X.Y. Li, F.H. Li, F. Guo, and Y.W. Shi, J. Electron. Mater. 40, 51–61 (2011).10.1007/s11664-010-1401-3 ↗
21. H.K. Kim and K.N. Tu, Phys. Rev. B. 53, 16027–16034 (1996).10.1103/PhysRevB.53.16027 ↗
22. Y. Gu, X.C. Zhao, Y. Li, Y. Liu, Y. Wang, and Z.Y. Li, J. Alloys Compd. 627, 39–47 (2015).10.1016/j.jallcom.2014.12.024 ↗
23. J.O. Suh, K.N. Tu, and N. Tamura, Appl. Phys. Lett. 91, 051907 (2007).10.1063/1.2761840 ↗
24. Y. Tang, Y.C. Pan, and G.Y. Li, J. Mater. Sci.-Mater. Electron. 24, 1587–1594 (2012).10.1007/s10854-012-0980-6 ↗
25. A.A. El-Daly, A. Fawzy, S.F. Mansour, and M.J. Younis, Mater. Sci. Eng. 578, 62–71 (2013).10.1016/j.msea.2013.04.022 ↗
26. C.W. Tan, Y.C. Chan, B. Leung, and H.D. Liu, Opt. Lasers Eng. 46, 75–82 (2008).10.1016/j.optlaseng.2007.06.007 ↗