Tuning the Properties of CZTS Films by Controlling the Process Parameters in Cost-Effective Non-vacuum Technique
Source abstract
Abstract
Highly dispersive Cu2ZnSnS4 (CZTS) nanoparticles were successfully synthesized by a simple solvothermal route. A low cost, non-vacuum method was used to deposit CZTS nanoparticle ink on glass substrates by a doctor blade process followed by selenization in a tube furnace to form Cu2ZnSn (S,Se)4 (CZTSSe) layers. Different selenization conditions and particle concentrations were considered in order to improve the crystallinity and surface morphology; the annealing temperature was varied between 400°C and 550°C and the annealing time was varied between 5 min and 20 min in a selenium-nitrogen atmosphere. The influence of annealing conditions on structural, compositional, optical and electrical properties of CZTSSe thin films was studied. An improvement in the structural and surface morphology was observed with increasing of annealing temperature (up to 500°C). An enhancement in the crystallinity and surface morphology were observed for thin films annealed for 10–15 min. Absorption study revealed that the band gap energy of as-deposited CZTS thin film was approximately 1.43 eV, while for CZTSSe thin films it ranged from 1.15 eV to 1.34 eV at different annealing temperatures, and from 1.33 eV to 1.38 eV for different annealing times.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. W. Ki and H.W. Hillhouse, Adv. Energy Mater. 1, 732 (2011).10.1002/aenm.201100140 ↗
2. F. Aslan and A. Tumbul, J. Alloys Compd. 612, 1 (2014).10.1016/j.jallcom.2014.05.140 ↗
3. G. Wang, W. Zhao, Y. Cui, Q. Tian, S. Gao, L. Huang, and D. Pan, A.C.S. Appl. Mater. Interfaces 5, 10042 (2013).10.1021/am402558a ↗
4. J. Scragg, J. Wätjen, and M. Edoff, J. Am. Chem. Socity 134, 19330 (2012).10.1021/ja308862n ↗
5. L. Cao, S. Ma, J. Sui, J. Bai, H. Dong, Q. Zhang, and L. Dong, Mater. Lett. 139, 101 (2015).10.1016/j.matlet.2014.10.051 ↗
6. K.V. Gurav, S.W. Shin, U.M. Patil, M.P. Suryawanshi, S.M. Pawar, M.G. Gang, S.A. Vanalakar, J.H. Yun, and J.H. Kim, J. Alloys Compd. 631, 178 (2015).10.1016/j.jallcom.2014.12.253 ↗
7. X. Yin, C. Tang, L. Sun, Z. Shen, and H. Gong, Chem. Mater. 26, 2005 (2014).10.1021/cm403423e ↗
8. J. Li, G. Chen, C. Xue, X. Jin, W. Liu, and C. Zhu, Sol. Energy Mater. Sol. Cells 137, 131 (2015).10.1016/j.solmat.2014.12.027 ↗
9. J. Li, Y. Zhang, H. Wang, L. Wu, J. Wang, W. Liu, Z. Zhou, Q. He, and Y. Sun, Sol. Energy Mater. Sol. Cells 132, 363 (2015).10.1016/j.solmat.2014.09.023 ↗
10. W. Wang, M.T. Winkler, O. Gunawan, T. Gokmen, T.K. Todorov, Y. Zhu, and D.B. Mitzi, Adv. Energy Mater. 4, 1 (2014).10.1142/9789814513289_0001 ↗
11. W. Li, K. Jiang, J. Zhang, X. Chen, Z. Hu, S. Chen, L. Sun, and J. Chu, Phys. Chem. Chem. Phys. 14, 9936 (2012).10.1039/c2cp41209h ↗
12. C. Yan, J. Chen, F. Liu, N. Song, H. Cui, B.K. Ng, J.A. Stride, and X. Hao, J. Alloys Compd. 610, 486 (2014).10.1016/j.jallcom.2014.05.004 ↗
13. Z. Guan, W. Luo, and Z. Zou, CrystEngComm 16, 2929 (2014).10.1039/c3ce42373e ↗
14. M. Zhou, Y. Gong, J. Xu, G. Fang, Q. Xu, and J. Dong, J. Alloys Compd. 574, 272 (2013).10.1016/j.jallcom.2013.05.143 ↗
15. W. Li, X. Han, Y. Zhao, Y. Gu, S. Yang, and T. Tanaka, J. Power Sources 294, 603 (2015).10.1016/j.jpowsour.2015.06.103 ↗
16. Y. Cui, Z. Zhang, X. Du, W. Liu, Y. Deng, S. Liu, and G. Wang, J. Alloys Compd. 658, 1020 (2016).10.1016/j.jallcom.2015.10.268 ↗
17. G. Demazeau, J. Phys: Conf. Ser. 121, 82003 (2008).
18. L.J. Chen and Y.J. Chuang, J. Cryst. Growth 376, 11 (2013).10.1016/j.jcrysgro.2013.04.026 ↗
19. C.H. Chang and J.M. Ting, Thin Solid Films 517, 4174 (2009).10.1016/j.tsf.2009.02.037 ↗
20. W. Xie, X. Jiang, C. Zou, D. Li, J. Zhang, J. Quan, and L. Shao, Phys. E. Low-Dimens. Syst. Nanostruct. 45, 16 (2012).10.1016/j.physe.2012.05.022 ↗
21. S. Hwang, D.H. Kim, D.H. Son, K.J. Yang, D. Nam, H. Cheong, J.K. Kang, and S.I. In, Sol. Energy Mater. Sol. Cells 143, 218 (2015).10.1016/j.solmat.2015.06.059 ↗
22. P.R. Ghediya and T.K. Chaudhuri, J. Mater. Sci.: Mater. Electron. 26, 1908 (2015).
23. S.W. Shin, I.Y. Kim, K.V. Gurav, C.H. Jeong, J.H. Yun, P.S. Patil, J.Y. Lee, and J.H. Kim, Curr. Appl. Phys. 13, 1837 (2013).10.1016/j.cap.2013.06.022 ↗
24. C.K. Miskin, W.C. Yang, C.J. Hages, N.J. Carter, C.S. Joglekar, E.A. Stach, and R. Agrawal, Prog. Photovolt. Res. Appl. 23, 654 (2015).10.1002/pip.2472 ↗
25. J. Li, H. Shen, W. Wang, J. Chen, H. Shang, Y. Li, and Z. Zhai, Mater. Lett. 172, 90 (2016).10.1016/j.matlet.2016.02.078 ↗
26. J. Shen, D. Zhang, J. Li, X. Li, Z. Sun, and S. Huang, Nano- Micro Lett. 5, 281 (2013).10.1007/BF03353759 ↗
27. J. Zhao, G.X. Liang, J.G. Hu, Z.H. Zheng, J.T. Luo, D.P. Zhang, Y. Zeng, and P. Fan, J. Electron. Mater. 47, 873 (2018).10.1007/s11664-017-5881-2 ↗
28. L.C. Wang and Y.C. Lin, Appl. Surf. Sci. 354, 14 (2015).10.1016/j.apsusc.2015.05.104 ↗
29. C. Gao, T. Schnabel, T. Abzieher, C. Krämmer, M. Powalla, H. Kalt, and M. Hetterich, Thin Solid Films 562, 621 (2014).10.1016/j.tsf.2014.04.030 ↗
30. M. Dimitrievska, G. Gurieva, H. Xie, A. Carrete, A. Cabot, E. Saucedo, A. Pérez-Rodríguez, S. Schorr, and V. Izquierdo-Roca, J. Alloys Compd. 628, 464 (2015).10.1016/j.jallcom.2014.12.175 ↗
31. T. Schnabel, M. Löw, and E. Ahlswede, Sol. Energy Mater. Sol. Cells 117, 324 (2013).10.1016/j.solmat.2013.06.021 ↗
32. X. Zeng, K.F. Tai, T. Zhang, C.W.J. Ho, X. Chen, A. Huan, T.C. Sum, and L.H. Wong, Sol. Energy Mater. Sol. Cells 124, 55 (2014).10.1016/j.solmat.2014.01.029 ↗
33. X. Lin, J. Kavalakkatt, M.C. Lux-Steiner, and A. Ennaoui, Adv. Sci. 2, 2 (2015).
34. R. Ma, F. Yang, S. Li, X. Zhang, X. Li, S. Cheng, and Z. Liu, Appl. Surf. Sci. 368, 8 (2016).10.1016/j.apsusc.2016.01.242 ↗
35. P.R. Ghediya, T.K. Chaudhuri, and D. Vankhade, J. Alloys Compd. 685, 498 (2016).10.1016/j.jallcom.2016.05.299 ↗
36. J. He, L. Sun, S. Chen, Y. Chen, P. Yang, and J. Chu, J. Alloys Compd. 511, 129 (2012).10.1016/j.jallcom.2011.08.099 ↗
37. F. Liu, F. Zeng, N. Song, L. Jiang, Z. Han, Z. Su, C. Yan, X. Wen, X. Hao, Y. Liu, and A.C.S. Appl, Mater. Interfaces 7, 14376 (2015).10.1021/acsami.5b01151 ↗
38. L.J. van der Pauw, Philips Tech. Rev. 20, 220 (1958).
39. A.A. Ramadan, R.D. Gould, and A. Ashour, Thin Solid Films 239, 272 (1994).10.1016/0040-6090(94)90863-X ↗
40. M. Jiang and X. Yan, Sol. Cells Res. Appl. Perspect. (2013), pp. 107–143.
41. A. Ziti, B. Hartiti, H. Labrim, S. Fadili, A. Ridah, B. Belhorma, M. Tahri, and P. Thevenin, Superlattices Microstruct. (2018).
42. I. Santos, M. Courel, N.R. Mathews, and X. Mathew, Mater. Sci. Semicon. Proc. 68, 68 (2017).10.1016/j.mssp.2017.06.013 ↗
43. F.Q. Zeng, Y.Q. Lai, Z.L. Han, B.K. Ng, Z.A. Zhang, H.L. Zhang, L.X. Jiang, and F.Y. Liu, RSC Adv. 6, 6562 (2016).10.1039/C5RA18975F ↗