journal article·2018-05

Synthesis, Characterization, and Thermal Behavior of Ni3(PO4)2·8H2O·Na3PO4·3.5H2O·0.75Na2SO4

Trilochan Swain, Gouri Sankhar Brahma

Journal of Electronic Materials· Volume 47· Issue 5
Publisher page

Abstract

A mixture of anhydrous sodium sulfate, hydrated nickel phosphate, and sodium phosphate has been synthesized and various techniques used to characterize it. Differential scanning calorimetry was used to investigate the thermal properties in both O2 and N2 atmosphere at rate of 10 K min−1. The specific heat capacity was calculated from 298 K to 573 K and vice versa in two thermal cycles in both atmospheres, revealing values of 18,931.64 J kg−1 K−1 in O2 atmosphere and 15,568.39 J kg−1 K−1 in N2 atmosphere in the second thermal cycle, being exothermic in nature in both cases. This exothermic behavior of the mixture indicates its potential use as a heat-dissipating material. The crystallite size of this inorganic heat-dissipating mixture was found to be ~ 22.9 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal and Kinetic Analysis · Chemical and Physical Properties in Aqueous Solutions · Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. C. Serre and G. Ferey, Inorg. Chem. 40, 5350 (2001).10.1021/ic010260x ↗
2. S.C. Lin, S.Y. Chen, S.-Y. Cheng, and J.C. Lin, Solid State Sci. 7, 896 (2005).10.1016/j.solidstatesciences.2005.04.001 ↗
3. A. Aaddane, M. Kacimi, and M. Ziyad, Catal. Lett. 73, 47 (2001).10.1023/A:1009018101539 ↗
4. S. Meseguer, M.A. Tena, C. Gargori, J.A. Nadenes, M. Llusar, and G. Monros, Ceram. Int. 33, 843 (2007).10.1016/j.ceramint.2006.01.024 ↗
5. R.D.A. Gaasbeek, H.G. Toonen, R.J. van Heerwaarden, and P. Buma, Biomaterials 26, 6713 (2005).10.1016/j.biomaterials.2005.04.056 ↗
6. M.A. Deyab, K. Eddahaoui, R. Essehli, S. Benmokhtar, T. Rhadfi, A. De Riccardis, and G. Mele, J. Mol. Liq. 216, 699 (2016).10.1016/j.molliq.2016.01.092 ↗
7. J. Zhao, S. Wang, Z. Run, G. Zhang, W. Du, and H. Pang, Part. Part. Syst. Charact. 32, 880 (2015).10.1002/ppsc.201500005 ↗
8. D. Jian, Q. Gao, D. Gao, M. Ruan, and W. Shi, Phys. Lett. A 357, 136 (2006).10.1016/j.physleta.2006.04.027 ↗
9. N. Guillou, Q. Gao, P.M. Forster, J.S. Chang, S.E. Park, G. Ferey, and A.K. Cheetham, Angew. Chem. Int. Ed. 40, 2831 (2001).10.1002/1521-3773(20010803)40:15<2831::AID-ANIE2831>3.0.CO;2-Z ↗
10. A.K. Cheetham, G. Ferey, and T. Loiseau, Angew. Chem. Int. Ed. 38, 3268 (1999).10.1002/(SICI)1521-3773(19991115)38:22<3268::AID-ANIE3268>3.0.CO;2-U ↗
11. N. Guillou, Q. Gao, M. Nogues, A.K. Cheetham, and G. Ferey, Solid State Sci. 4, 1179 (2002).10.1016/S1293-2558(02)01372-9 ↗
12. D. Gao and Q. Gao, Micropor. Mesopor. Mater. 85, 365 (2005).10.1016/j.micromeso.2004.12.028 ↗
13. F.S. Omar, A. Numan, N. Duraisamy, S. Bashir, K. Ramesh, and S. Ramesh, RSC Adv. 6, 76298 (2016).10.1039/C6RA15111F ↗
14. T. Swain, J. Therm. Anal. Calorim. 127, 2191 (2017).10.1007/s10973-016-5810-2 ↗
15. T. Swain and G.S. Brahma, J. Inorg. Organomet. Polym. 27, 131 (2017).10.1007/s10904-016-0454-z ↗
16. T. Swain, J. Ind. Chem. Soc. 91, 277 (2014).
17. T. Swain, J. Therm. Anal. Calorim. 110, 929 (2012).10.1007/s10973-011-1865-2 ↗
18. T. Swain, J. Therm. Anal. Calorim. 103, 1111 (2011).10.1007/s10973-010-1142-9 ↗
19. J.J. Biendicho, K.-C. Haiso, S. Hull, and A.R. West, Inorg. Chem. 56, 3657 (2017).10.1021/acs.inorgchem.7b00109 ↗
20. A. Omek, Chem. Eng. J. 331, 501 (2018).10.1016/j.cej.2017.09.007 ↗
21. C.M. Julien and M. Massot, in, Proceedings of the International Workshop on Advanced Techniques for Energy Sources Investigation and Testing (Sofia, 2004). pp L3-1-L3-17.
22. A. Periasamy, S. Muruganand, and M. Palaniswamy, Rasayan J. Chem. 2, 981 (2009).
23. X.-Z. Chen, J.-H. Tang, Y.-N. Cui, M. Liu, and D. Mao, J. Chem. Eng. Data. 59, 481 (2014).10.1021/je400932e ↗
24. P. Porkodi, V. Yegnaraman, P. Kamaraj, V. Kalyanavalli, and D. Jeyakumar, Chem. Mater. 20, 6410 (2008).10.1021/cm800208k ↗
25. G.K. Willianson and W.H. Hall, Acta Metall. 1, 22 (1953).10.1016/0001-6160(53)90006-6 ↗
26. U. Thupakula, A. Jena, A.H. Khan, A. Dalui, and S. Acharya, J. Nanopart. Res. 14, 701 (2012).10.1007/s11051-011-0701-8 ↗
27. A. Ghule, R. Murugan, and H. Chang, Thermochim. Acta 371, 127 (2001).10.1016/S0040-6031(00)00719-X ↗
28. S.J. Milne and A.R. West, J. Solid State Chem. 57, 166 (1985).10.1016/S0022-4596(85)80006-2 ↗
29. M. Kizilyalli and A.J.E. Welch, J. Inorg. Nucl. Chem. 38, 1237 (1976).10.1016/0022-1902(76)80127-3 ↗
30. A. Ghule, N. Baskaran, R. Murugan, and H. Chang, Solid State Ionics 161, 291 (2003).10.1016/S0167-2738(03)00128-0 ↗
31. A. Abhat, Sol. Energy 30, 313 (1983).10.1016/0038-092X(83)90186-X ↗
32. G. Lane, Latent Heat Materials, vol. 1 (Boca Raton: CRC Press, 1983).
33. H.P. Garg, S.C. Mullick, and A.K. Bhargava, Solar Thermal Energy Storage (Dordrecht: D. Reidel, 1985).10.1007/978-94-009-5301-7 ↗
34. B. Zalba, J.M. Marin, L.F. Cabeza, and H. Mehling, Appl. Therm. Eng. 23, 251 (2003).10.1016/S1359-4311(02)00192-8 ↗
35. Y. Huang, Y.-C. Lin, D.M. Jenkins, N.A. Chernova, Y. Chung, B. Radhakrishnan, I.-H. Chu, J. Fang, Q. Wang, F. Omenya, S.P. Ong, and M.S. Whittingham, ACS Appl. Mater. Interfaces 8, 7013 (2016).10.1021/acsami.5b12081 ↗
36. G.M. Nolis, F. Omenya, R. Zhang, B. Fang, S. Upreti, N.A. Chernova, F. Wang, J. Graetz, Y.-Y. Hu, C.P. Grey, and M.S. Whittingham, J. Mater. Chem. 22, 20482 (2012).10.1039/c2jm33183g ↗
37. P. Hanggi and G.-L. Ingold, Acta Phys. Pol. B 37, 1537 (2006).
38. P. Hanggi, G.-L. Ingold, and P. Talkner, N. J. Phys. 10, 115008 (2008). https://doi.org/10.1088/1367-2630/10/11/115008 .10.1088/1367-2630/10/11/115008 ↗
39. A.J. Leggett, S. Chakravarty, A.T. Dorsey, M.P.A. Fisher, A. Garg, and W. Zwerger, Rev. Mod. Phys. 59, 1 (1987).10.1103/RevModPhys.59.1 ↗