journal article·2017-05

Corrosion Behavior of Bi2Te3-Based Thermoelectric Materials Fabricated by Melting Method

Hitoshi Kohri, Takayoshi Yagasaki

Journal of Electronic Materials· Volume 46· Issue 5
Publisher page

Abstract

Bi2Te3-based compounds are used practically as thermoelectric cooling materials. Bi2Te3–Sb2Te3 or Bi2Te3–Bi2Se3 pseudobinary system compounds are usually applied as p- or n-type material, respectively. Atmospheric water may condense on the surface of thermoelectric materials constituting Peltier modules, depending on their operating environment. Very few studies on the corrosion resistance of Bi2Te3-based compounds have been reported in literature. Moreover, the detailed corrosion behavior of Bi2Te3-based compounds remains unclear. In this study, the corrosion behavior of cleavage planes of Bi2Te3-based compounds fabricated by a melting method has been investigated. Bi2Te3, Sb2Te3, and Bi2Se3 were prepared by the vertical Bridgman method, respectively. Their electrochemical properties evaluated at room temperature by cyclic voltammetry in a standard three-electrode cell with naturally aerated 0.6 mass% or 3.0 mass% NaCl solution as working electrolyte. The c-planes of Bi2Te3 and Sb2Te3 exhibited similar corrosion potential. The corrosion potential of c-plane of Bi2Se3 was more cathodic compared with that of the telluride. The passive current density of the Bi2Te3-based compounds was single or double digit lower than that of stainless steel. X-ray photoelectron spectroscopy results for the electrolyte after testing indicated the possibility that a corrosion product diffuses to the environment including NaCl for Sb2Te3 and Bi2Se3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (5)

Show source-provided references
1. M. Sakata, Thermoelectrics-Principles and Applications (Tokyo: Realize, 2001), p. 343.
2. H.-P. Feng, B. Yu, S. Chen, K. Collins, C. He, Z.F. Ren, and G. Chen, Electrochim. Acta 56, 3079 (2011).10.1016/j.electacta.2010.12.008 ↗
3. F. Rosalbino, R. Carlini, G. Zanicchi, and G. Scavino, J. Alloys Compd. 567, 26 (2013).10.1016/j.jallcom.2013.03.071 ↗
4. The Electrochemical Society of Japan, Wakaigijutsushanotameno Denkikagaku (Tokyo: Maruzen, 1983), p. 110.
5. A. Fujishima, M. Aizawa, and T. Inoue, Denkikagakusokuteiho Jo (Tokyo: Gihodo shuppan, 1984), p. 49.