journal article·2013-05

Quantitative Comparison Between Dislocation Densities in Offcut 4H-SiC Wafers Measured Using Synchrotron X-ray Topography and Molten KOH Etching

Huanhuan Wang, Shun Sun, Michael Dudley, Shayan Byrappa, Fangzhen Wu, Balaji Raghothamachar, Gil Chung, Edward K. Sanchez, Stephan G. Mueller, Darren Hansen, Mark J. Loboda

Journal of Electronic Materials· Volume 42· Issue 5
Publisher page

Abstract

Molten KOH etching and x-ray topography have been well established as two of the major characterization techniques used for observing as well as analyzing the various crystallographic defects in both substrates and homoepitaxial layers of silicon carbide. Regarding assessment of dislocation density in commercial wafers, though the two techniques show good consistency in threading dislocation density analysis, significant discrepancy is found in the case of basal plane dislocations (BPDs). In this paper we compare measurements of BPD densities in 4-inch 4H-SiC commercial wafers assessed using both etching and topography methods. The ratio of the BPD density calculated from topographic images to that from etch pits is estimated to be larger than 1/sinθ, where θ is the offcut angle of the wafer. Based on the orientations of the defects in the wafers, a theoretical model is put forward to explain this disparity and two main sources of errors in assessing the BPD density using chemical etching are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon Carbide Semiconductor Technologies · Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. P.G. Neudeck, in The VLSI Handbook (The Electrical Engineering Handbook Series), ed. by W.-K. Chen (CRC/IEEE, Boca Raton, FL, 2000), pp. 6.1–6.24
2. P.G. Neudeck, Mater. Sci. Forum 338–342, 1161 (2000).10.4028/www.scientific.net/MSF.338-342.1161 ↗
3. St.G. Müller, in Superlattices and Microstructures, Vol. 40, (Spring Meeting of the European Materials Research Society, Nice, 2006), pp. 195–200.10.1016/j.spmi.2006.09.029 ↗
4. Q. Wahab, A. Ellison, A. Henry, E. Janzen, C. Hallin, J. Di Persio, and R. Martinez, Appl. Phys. Lett. 76, 2725 (2000). doi: 10.1063/1.126456 .10.1063/1.126456 ↗
5. R. Singh, Microelectron. Reliab. 46, 713 (2006). doi: 10.1016/j.microrel.2005.10.013 .10.1016/j.microrel.2005.10.013 ↗
6. P. Bergman, H. Lendenmann, P.A. Nilsson, U. Lindefelt, and P. Skytt, Mater. Sci. Forum 353–356, 299 (2001). doi: 10.4028/www.scientific.net/MSF.353-356.299 .10.4028/www.scientific.net/MSF.353-356.299 ↗
7. R.E. Stahlbush, M. Fatemi, J.B. Fedison, S.D. Arthur, L.B. Rowland, and S. Wang, J. Electron. Mater. 31, 370 (2002). doi: 10.1007/s11664-002-0085-8 .10.1007/s11664-002-0085-8 ↗
8. R.E. Stahlbush, K.X. Liu, M.E. Twigg, in IRPS Conf. Rec., (IEEE, San Jose, 2006), 26–30, pp. 90–94, doi: 10.1109/RELPHY.2006.25119610.1109/RELPHY.2006.251196 ↗
9. V.D. Wheeler, B.L. VanMil, R.L. Myers-Ward, C.R. Eddy, R.E. Stahlbush, D.K. Gaskill, (ISDRS, Stamp College Park, MD, 2009), pp. 1–2, 9–11 doi: 10.1109/ISDRS.2009.537807210.1109/ISDRS.2009.5378072 ↗
10. X. Zhang, M. Skowronski, K.X. Liu, R.E. Stahlbush, J.J. Sumakeris, M.J. Paisley, and M.J. O’Loughlin, J. Appl. Phys. 102, 093520 (2007). doi: 10.1063/1.2809343 .10.1063/1.2809343 ↗
11. W. Chen and M.A. Capano, J. Appl. Phys. 98, 114907 (2005). doi: 10.1063/1.2137442 .10.1063/1.2137442 ↗
12. H.Z. Song and T.S. Sudarshan, Mater. Sci. Forum 717–720, 125 (2012). doi: 10.4028/www.scientific.net/MSF.717-720.125 .10.4028/www.scientific.net/MSF.717-720.125 ↗
13. R.T. Bondokov, I.I. Khlebnikov, T. Lashkov, E. Tupitsyn, G. Stratiy, Y. Khlebnikov, and T.S. Sudarshan, Jpn. J. Appl. Phys. 41, 7312 (2002). doi: 10.1143/JJAP.41.7312 .10.1143/JJAP.41.7312 ↗
14. M. Dudley and X. Huang, Mater. Sci. Forum 338–342, 431 (2000). doi: 10.4028/www.scientific.net/MSF.338-342.431 .10.4028/www.scientific.net/MSF.338-342.431 ↗
15. B. Kallinger, S. Polster, P. Berwian, J. Friedrich, G. Müller, A.N. Danilewsky, A. Wehrhahn, and A.D. Weber, J. Cry-st. Growth 314, 21 (2011). doi: 10.1016/j.jcrysgro.2010.10.145 .10.1016/j.jcrysgro.2010.10.145 ↗
16. H. Tsuchida, I. Kamata, and M. Nagano, J. Cryst. Growth 306, 254 (2007). doi: 10.1016/j.jcrysgro.2007.05.006 .10.1016/j.jcrysgro.2007.05.006 ↗
17. S.A. Sakwe, R. MüllerWellmann, and P.J. Wellmann, J. Cryst. Growth 289, 520 (2006). doi: 10.1016/j.jcrysgro.2005.11.096 .10.1016/j.jcrysgro.2005.11.096 ↗
18. Y. Ishikawa, Y. Yao, Y. Sugawar, K. Danno, H. Suzuki, Y. Kawai, and N. Shibata, Mater. Sci. Forum 717–720, 367 (2012). doi: 10.4028/www.scientific.net/MSF.717-720.367 .10.4028/www.scientific.net/MSF.717-720.367 ↗
19. Y. Chen, Defects Structures in Silicon Carbide Bulk Crystals, Epilayers and Devices, Ph.D. Thesis. Stony Brook University, U.S. (2009) ( http://hdl.handle.net/1951/45064 ).
20. A. Authier, Adv. X-ray Anal. 10, 9 (1967).10.1007/978-1-4684-7835-8_2 ↗