journal article·2015-02

Electrically Conductive Silver Paste Obtained by Use of Silver Neodecanoate as Precursor

Longguang Shen, Jianguo Liu, Xiaoyan Zeng, Zhao Ren

Journal of Electronic Materials· Volume 44· Issue 2
Publisher page

Abstract

An electrically conductive silver paste has been prepared from an organometallic compound, silver neodecanoate, as silver precursor. The precursor was highly soluble in organic solvents and decomposed into metallic silver at low sintering temperatures (<200°C). Thermogravimetric analysis showed the silver content of the paste was approximately 25 wt.%. Viscosity studies indicated the paste was a pseudoplastic liquid with viscosity in the range 6.5–9 Pa s. The paste was compatible with the micro-pen direct-writing process, enabling production of silver lines on a substrate. The electrical resistivity of the silver lines was 9 × 10−6 Ω cm after sintering at 115°C for 60 min, 5.8 × 10−6 Ω cm when sintered at 150°C for 60 min, and 3 × 10−6 Ω cm when sintered above 300°C, values which are similar to those of bulk silver. Hence, the prepared paste can be successfully used on flexible substrates such as polymers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanomaterials and Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Nanofabrication and Lithography Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. J. Perelaer, P.J. Smith, and D. Mager, J. Mater. Chem. 20, 8446 (2010).10.1039/c0jm00264j ↗
2. G.L. Whiting and A.C. Arias, Appl. Phys. Lett. 95, 253302 (2009).10.1063/1.3276913 ↗
3. D. Shin and I. Kim, Nanotechnology 20, 415301 (2009).10.1088/0957-4484/20/41/415301 ↗
4. A. Kamyshny, J. Steinke, and S. Magdassi, Open. Appl. Phys. J. 4, 19 (2011).10.2174/1874183501104010019 ↗
5. S.E. Habas, H.A.S. Platt, and M.F.A.M. Hest, Chem. Rev. 110, 6571 (2010).10.1021/cr100191d ↗
6. M. Singh, H.M. Haverinen, and P. Dhagat, Adv. Mater. 22, 673 (2010).10.1002/adma.200901141 ↗
7. S. Chun, D. Grudinin, D. Lee, and S. Kim, Chem. Mater. 21, 343 (2009).10.1021/cm802475m ↗
8. I. Kim and S. Chun, J. Electron. Mater. 40, 1977 (2011).10.1007/s11664-011-1698-6 ↗
9. B. Lee, Y. Kim, and S. Yang, Curr. Appl. Phys. 9, 157 (2009).10.1016/j.cap.2009.03.008 ↗
10. J. Mei and M.R. Lovell, IEEE Trans. Electron. Packag. 28, 265 (2005).10.1109/TEPM.2005.852542 ↗
11. Y.H. Kim, D.K. Lee, and B.G. Jo, Colloid. Surf. A 284, 364 (2006).10.1016/j.colsurfa.2005.10.067 ↗
12. J.J.P. Valeton, K. Hermans, and C.W.M. Bastiaansen, J.␣Mater. Chem. 20, 543 (2010).10.1039/B917266A ↗
13. A.L. Dearden, P.J. Smith, and D. Shin, Macromol. Rapid Commun. 26, 315 (2005).10.1002/marc.200400445 ↗
14. S.F. Jahn, A. Jakob, and T. Blaudeck, Thin Solid Films 518, 3218 (2010).10.1016/j.tsf.2010.01.030 ↗
15. A. Yabuki, N. Arriffin, and M. Yanase, Thin Solid Films 519, 6530 (2011).10.1016/j.tsf.2011.04.112 ↗
16. K.J. Lee, B.H. Jun, J. Choi, Y.I. Lee, and J. Joung, Nanotechnology 18, 35601 (2007).10.1088/0957-4484/18/3/035601 ↗
17. J. Perelaer, C.E. Hendriks, and A. Laat, Nanotechnology 20, 165303 (2009).10.1088/0957-4484/20/16/165303 ↗
18. Z. Cai, X. Zeng, and J. Liu, J. Electron. Mater. 40, 301 (2011).10.1007/s11664-010-1418-7 ↗
19. J. Liu, X. Li, X. Wang, and X. Zeng, J. Electron. Mater. 39, 2267 (2010).10.1007/s11664-010-1327-9 ↗
20. K.F. Teng and R.W. Vest, IEEE Trans. Compon. Hybrid. Manuf. Technol. 11, 291 (1988).10.1109/33.16656 ↗