Electromigration in a Sn-3 wt.%Ag-0.5 wt.%Cu-3 wt.%Bi Solder Stripe Between Two Cu Electrodes Under Current Stressing
Source abstract
Abstract
The electromigration behavior of a Sn-3 wt.%Ag-0.5 wt.%Cu-3 wt.%Bi solder stripe between two Cu electrodes under current stressing at various densities has been investigated for a current stressing time of 72 h and a temperature of 120°C. After current stressing at a density of 1.0 × 104 A/cm2, the solder matrix exhibited a slight microstructural change as well as formation of a distributed Cu6Sn5 phase near the anode-side solder/Cu interface. Upon increasing the current density to 3.9 × 104 A/cm2 and 5.0 × 104 A/cm2, a high density of distributed Cu6Sn5 phase was formed across the entire solder stripe, resulting in pronounced microstructural change of the solder. Hillocks were also formed near the anode-side interface due to accumulation of a Sn-rich phase, a Bi-rich phase, and a distributed Cu6Sn5 phase, while voids were formed in the solder matrix and at the opposite cathode side. The mechanisms of formation of the distributed Cu6Sn5 phase and migration of Bi and Sn are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. J. Zhao, L. Qi, X.M. Wang, and L. Wang, J. Alloys Compd. 375, 196 (2004).10.1016/j.jallcom.2003.12.005 ↗
2. Y. Kariya and M. Otsuka, J. Electron. Mater. 27, 866 (1998).10.1007/s11664-998-0111-6 ↗
3. M.J. Rizvi, Y.C. Chan, C. Bailey, H. Lub, and M.N. Islam, J. Alloys Compd. 407, 208 (2006).10.1016/j.jallcom.2005.06.050 ↗
4. L. Qi, J. Zhao, X.M. Wang, and L. Wang, IEEE International Conference on the Business of Electronic Product Reliability and Liability (2004), p. 42.
5. W.J. Choi, E.C.C. Yeh, and K.N. Tu, J. Appl. Phys. 94, 5665 (2003).10.1063/1.1616993 ↗
6. S.W. Chen, S.K. Lin, and J.M. Jao, Mater. Trans. 45, 661 (2004).10.2320/matertrans.45.661 ↗
7. T.Y. Lee and K.N. Tu, J. Appl. Phys. 89, 3189 (2001).10.1063/1.1342023 ↗
8. J.W. Nah, K.W. Paik, J.O. Suh, and K.N. Tu, J. Appl. Phys. 94, 7560 (2003).10.1063/1.1628388 ↗
9. S.S. Ha, J.W. Kim, J.W. Yoon, S.O. Ha, and S.B. Jung, J. Electron. Mater. 38, 70 (2008).10.1007/s11664-008-0574-5 ↗
10. L. Xu, J.K. Han, J.J. Liang, K.N. Tu, and Y.S. Lai, Appl. Phys. Lett. 92, 262104 (2008).10.1063/1.2953692 ↗
11. H.B. Huntington and A.R. Grone, J. Phys. Chem. Solids 20, 76 (1961).10.1016/0022-3697(61)90138-X ↗
12. J.R. Black, IEEE Trans. Electron Dev. ED-16, 338 (1969).10.1109/T-ED.1969.16754 ↗
13. C.M. Chen and S.W. Chen, Acta Mater. 50, 2461 (2002).10.1016/S1359-6454(02)00076-9 ↗
14. H. Gan, W.J. Choi, G. Xu, and K.N. Tu, JOM 54, 34 (2002).10.1007/BF02701847 ↗
15. C.M. Chen, L.T. Chen, and Y.S. Lin, J. Electron. Mater. 36, 168 (2007).10.1007/s11664-006-0025-0 ↗
16. H. He, G. Xu, and F. Guo, J. Mater. Sci. 45, 334 (2010).10.1007/s10853-009-3939-0 ↗
17. C. Chen, H.M. Tong, and K.N. Tu, Annu. Rev. Mater. Res. 40, 531 (2010).10.1146/annurev.matsci.38.060407.130253 ↗
18. Y.M. Hung and C.M. Chen, J. Electron. Mater. 37, 887 (2008).10.1007/s11664-008-0402-y ↗
19. A. Zribi, A. Clark, L. Zavalij, P. Borgesen, and E.J. Cotts, J. Electron. Mater. 30, 1157 (2001).10.1007/s11664-001-0144-6 ↗
20. L.T. Chen and C.M. Chen, J. Electron. Mater. 21, 962 (2006).
21. Q.L. Yang and J.K. Shang, J. Electron. Mater. 34, 1363 (2005).10.1007/s11664-005-0191-5 ↗
22. C.M. Chen, Y.M. Hung, and C.H. Lin, J. Alloys Compd. 475, 238 (2009).10.1016/j.jallcom.2008.07.106 ↗
23. F.Y. Ouyang, K. Chen, K.N. Tu, and Y.S. Lai, Appl. Phys. Lett. 91, 231919 (2007).10.1063/1.2822446 ↗
24. K. Chen, N. Tamura, M. Kunz, K.N. Tu, and Y.S. Lai, J. Appl. Phys. 106, 023502 (2009).10.1063/1.3157196 ↗
25. B. Li, Y. Shi, Y. Lei, F. Guo, Z. Xia, and B. Zong, J. Electron. Mater. 34, 217 (2005).10.1007/s11664-005-0207-1 ↗