The Thermal Stress Analysis for IC Integrations with TSV Interposer by Complement Sector Models
Source abstract
Abstract
The thermal stress of typical integrated circuit (IC) integration with the interposer of through silicon via (TSV) was investigated in this study. To overcome the huge computational costs due to meshing the large amount of TSVs’ microstructures, a simplified method, i.e. the complement sector model, was proposed and verified by the symmetric 1/8th full model. Using the sector model, the parametric studies were carried out to reveal the critical locations of TSV and the crucial parameters. Furthermore, statistical methods were invoked to clarify the impact of the major parameters, such as the modulus and coefficient of thermal expansion of underfill materials, the pitch and diameter of TSV, etc. Upon the analysis results, the design of minimized stress in TSV for the IC integration with TSV interposer was achieved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. J.H. Lau, Microelectron. Int. J 28, 8 (2011).
2. B.Q. Wu, A. Kumar, and S. Pamarthy, J. Appl. Phys 108, 051101 (2010).10.1063/1.3474652 ↗
3. D.H. Woo, N.H. Seong, and H.-H.S. Lee, IEEE Trans. Very Large Scale Integr. (VLSI) Syst. 21, 1 (2013).10.1109/TVLSI.2011.2176761 ↗
4. R. Weerasekera, H.Y. Li, L.W. Yi, H. Sanming, J. Shi, J. Minkyu, and K.H. Teo, IEEE Electron Device Lett. 34, 18 (2013).10.1109/LED.2012.2228158 ↗
5. X. Liu, Q. Chen, V. Sundaram, M. Simmons-Matthews, K.P. Wachtler, R.R. Tummala, and S.K. Sitaraman, IEEE Trans. Device Mater. Reliab. 12, 263 (2012).10.1109/TDMR.2012.2194495 ↗
6. J. Kim, J.S. Pak, J. Cho, E. Song, J. Cho, H. Kim, T. Song, J. Lee, H. Lee, K. Park, S. Yang, M.S. Suh, K.Y. Byun, and J. Kim, IEEE Trans. Compon. Packag. Manuf. Technol. 1, 181 (2011).10.1109/TCPMT.2010.2101890 ↗
7. T. Kinoshita, T. Kawakami, T. Hori, K. Matsumoto, S. Kohara, Y. Orii, F. Yamada, and M. Kada, J. Electron. Packag. 134, 020903 (2012).10.1115/1.4006515 ↗
8. S.K. Ryu, K.H. Lu, X.F. Zhang, J.H. Im, P.S. Ho, and R. Huang, IEEE Trans. Device Mater. Reliab. 11, 35 (2011).10.1109/TDMR.2010.2068572 ↗
9. I. Dutta, P. Kumar, and M.S. Bakir, JOM 63, 70 (2011).10.1007/s11837-011-0179-y ↗
10. K.H. Lu, S.K. Ryu, Q. Zhao, X.F. Zhang, J. Im, R. Huang, and P.S. Ho, Thermal Stress Induced Delamination of Through Silicon Vias in 3-D Interconnects. 2010 Proceedings 60th Electronic Components and Technology Conference (ECTC), (2010), pp. 40–45.
11. N. Ranganathan, K. Prasad, N. Balasubramanian, and K.L. Pey, J. Micromech. Microeng. 18, 075018 (2008).10.1088/0960-1317/18/7/075018 ↗
12. M. Jung, J. Mitra, D.Z. Pan, and S.K. Lim, IEEE Trans. Comput. Aided Des. Integr. Circuits Syst. 31, 1194 (2012).10.1109/TCAD.2012.2188400 ↗
13. C. Cassidy, J. Kraft, S. Carniello, F. Roger, H. Ceric, A.P. Singulani, E. Langer, and F. Schrank, IEEE Trans. Device Mater. Reliab. 12, 285 (2012).10.1109/TDMR.2012.2189212 ↗
14. X. Liu, Q. Chen, P. Dixit, R. Chatterjee, R.R. Tummala, and S.K. Sitaraman, IEEE 59th Electronic Components and Technology Conference, Vols 1–4, (2009), pp. 624–629.
15. A. Kamto, Y. Liu, L. Schaper, and S.L. Burkett, Thin Solid Films 518, 1614 (2009).10.1016/j.tsf.2009.07.151 ↗
16. S.H. Hwang, B.J. Kim, H.Y. Lee, and Y.C. Joo, J. Electron. Mater. 41, 232 (2012).10.1007/s11664-011-1767-x ↗