journal article·2021-01

Design and Optimization of High-Performance Through Hole Based MEMS Energy Harvester Using PiezoMUMPs

Priyabrata Biswal, Sougata Kumar Kar, Banibrata Mukherjee

Journal of Electronic Materials· Volume 50· Issue 1
Publisher page

Abstract

Piezoelectric energy harvesting is an emerging area of research to meet the demand of nonconventional energy sources. In this paper, we have designed and analysed high-performance micro-electromechanical system (MEMS) piezoelectric energy harvesters by incorporating a through-hole in the classical cantilever configuration. The harvesters are designed using piezoelectric multi-user MEMS processes (PiezoMUMPs), where aluminum nitride (AlN) piezoelectric material is chosen on silicon substrate. A unique optimization method is applied to deduce a critical ratio of hole length to cantilever length as 0.2–0.26 for structures that are not tip mass-based and 0.4–0.5 for tip mass-based structures to achieve maximum power harvesting capability. The performance of the proposed harvesters is observed to be superior in comparison to that reported in the literature in terms of improved voltage and power harvesting capability and less area requirement. The classical cantilever topology with unoptimized and optimized holes produces power of 423 nW with normalized power density (NPD) of 12.78 μW/mm $$3/\hbox {g}2$$ and 490 nW with NPD of $$14.95 \mu \hbox {W}/\hbox {mm}3/\hbox {g}2$$ , respectively, at load resistance of $$1 \hbox { M}\Omega $$ with application of 1 g acceleration. Furthermore, a comprehensive analysis of PiezoMUMPs design guidelines for designing hole-based harvesters is presented, and a layout of the harvesters to be fabricated is also provided.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative Energy Harvesting Technologies · Advanced MEMS and NEMS Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. M. Kumar, G.M. Krishna, B. Mukherjee, and S. Sen, J. Micro/Nanolithogr. MEMS MOEMS 19(1), 015001 (2020).10.1117/1.JMM.19.1.015001 ↗
2. M. Kumar, B. Mukherjee, K.B.M.M. Swamy, and S. Sen, J. Microelectromech. Syst. 27(4), 656 (2018).10.1109/JMEMS.2018.2842429 ↗
3. J.Q. Liu, H.B. Fang, Z.Y. Xu, X.H. Mao, X.C. Shen, D. Chen, H. Liao, and B.C. Cai, Microelectron. J. 39(5), 802 (2008).10.1016/j.mejo.2007.12.017 ↗
4. F. Meddour and Z. Dibi, IET Microwav. Antennas Propag 11(4), 483 (2016).10.1049/iet-map.2016.0304 ↗
5. H. Takise, T. Takahashi, M. Suzuki, and S. Aoyagi, Micro Nano Lett. 12(8), 569 (2017).10.1049/mnl.2017.0128 ↗
6. M. Shin and I. Joe, Let Commun. 10(12), 1508 (2016).
7. Y. Dai, J. Chen, W. Tian, L. Xu, and S. Gao, IEEE Sens. J. (2020)
8. D. Chaudhuri, S. Kundu, and N. Chattoraj, Microsyst. Technol. 25(4), 1437 (2019).10.1007/s00542-018-4156-z ↗
9. G. Zhang and J. Hu, J. Electron. Mater. 43(11), 3912 (2014).10.1007/s11664-014-3398-5 ↗
10. P.K. Panda, B. Sahoo, M. Chandraiah, S. Raghavan, B. Manoj, J. Ramakrishna, and P. Kiran, J. Electron. Mater. 44(11), 4349 (2015).10.1007/s11664-015-3959-2 ↗
11. S. Priya, H.C. Song, Y. Zhou, R. Varghese, A. Chopra, S.G. Kim, I. Kanno, L. Wu, D.S. Ha, J. Ryu, et al., Energy Harvest. Syst. 4(1), 3 (2019).10.1515/ehs-2016-0028 ↗
12. G. Zhang, S. Gao, H. Liu, and S. Niu, Microsyst. Technol. 23(8), 3457 (2017).10.1007/s00542-016-3224-5 ↗
13. P. Biswal, N. Verma, S.K. Kar, and B. Mukherjee, in 2018 15th IEEE India Council International Conference (INDICON) (IEEE, 2018), pp. 1–5
14. L. Dhakar, H. Liu, F. Tay, and C. Lee, Sens. Actuators A Phys. 199, 344 (2013).10.1016/j.sna.2013.06.009 ↗
15. A. Batra, J. Currie, A. Alomari, M. Aggarwal, and C. Bowen, Measurement 114, 9 (2018).10.1016/j.measurement.2017.08.038 ↗
16. L.T. Lee, M.A. Mohamed, I. Yahya, J. Kulothungan, M. Muruganathan, and H. Mizuta, Microsys. Technol. 24(9), 3783 (2018).10.1007/s00542-018-3857-7 ↗
17. P. Li, S. Gao, H. Cai, and Y. Cui, Int. J. Appl. Electromagn. Mech. 47(1), 125 (2015).10.3233/JAE-140002 ↗
18. A.H. Alameh, M. Gratuze, and F. Nabki, IEEE Sens. J. 19(22), 10316 (2019).10.1109/JSEN.2019.2932341 ↗
19. M. Gratuze, A.H. Alameh, and F. Nabki, Sensors 19(15), 3247 (2019).10.3390/s19153247 ↗
20. Y. Jia and A.A. Seshia, Microsys. Technol. 22(12), 2841 (2016).10.1007/s00542-015-2599-z ↗
21. Y. Jia and A.A. Seshia, J. Microelectromech. Syst. 25(1), 108 (2015).10.1109/JMEMS.2015.2496346 ↗
22. Y. Jia, S. Du, and A.A. Seshia, J. Micromech. Microeng. 26(12), 124007 (2016).10.1088/0960-1317/26/12/124007 ↗
23. S. Nabavi and L. Zhang, J. Microelectromechan. Syst. 28(6), 1100 (2019).10.1109/JMEMS.2019.2942291 ↗
24. S. Nabavi and L. Zhang, in 2018 IEEE SENSORS (IEEE, 2018), pp. 1–4
25. S. Nabavi and L. Zhang, IEEE Sens. J. 19(13), 4837 (2019).10.1109/JSEN.2019.2904025 ↗
26. S. Nabavi and L. Zhang, J. Microelectromechan. Syst. 28(1), 77 (2018).10.1109/JMEMS.2018.2878657 ↗
27. F.A.C. de Oliveira and D.W. de Lima Monteiro, in 2017 2nd International Symposium on Instrumentation Systems, Circuits and Transducers (INSCIT) (IEEE), pp. 1–4
28. S.S. Chauhan, M. Joglekar, and S. Manhas, IEEE Sens. J. 19(20), 9122 (2019).10.1109/JSEN.2019.2923972 ↗
29. Y. Jia, S. Du, E. Arroyo, and A.A. Seshia, in 2018 IEEE Micro Electro Mechanical Systems (MEMS) (IEEE, 2018), pp. 226–229
30. Y. Tian, G. Li, Z. Yi, J. Liu, and B. Yang, J. Phys. Chem. Solids 117, 21 (2018).10.1016/j.jpcs.2018.02.024 ↗
31. A. Cowen, G. Hames, K. Glukh, and B. Hardy, MEMSCAP Inc 1 (2014)
32. S.N. Fernando and J. Chaffey, in Smart Structures, Devices, and Systems II, vol. 5649 (International Society for Optics and Photonics, 2005), vol. 5649, pp. 265–275
33. M. Defosseux, M. Allain, E. Defay, and S. Basrour, Sens. Actuators A Phys. 188, 489 (2012).10.1016/j.sna.2012.07.002 ↗