journal article·2020-08

Synthesis of Hydrogen-Containing Methyl Phenyl Silicone Resins with a High Refractive Index for LED Encapsulation

Zhaoqun Pan, Kelin Zeng, Bingsheng Huang, Liqiang Zhu

Journal of Electronic Materials· Volume 49· Issue 8
Publisher page

Abstract

Addition-curing is the most common method for preparing high-performance silicone materials for light-emitting diode (LED) encapsulation. The structure and the hydrogen content of the hydrogen-containing cross-linking agents used in addition reactions have a significant influence on the performance of the cured products. In this study, a series of hydrogen-containing methyl phenyl silicone resins with different hydrogen content were synthesized through hydrolysis condensation. Subsequently, the high-refractive-index hydrogen-containing silicone resins reacted with vinyl methyl phenyl silicone resins to obtain methyl phenyl silicone materials. The cured products showed high light transmittance (> 89% at 450 nm), appropriate hardness and good thermal stability. The tests of reflow soldering (265°C ± 5°C for 10 cycles) and lumen depreciation (50 mA for 165 h) further demonstrated that the prepared silicone materials possessed high thermal resistance and stability. In addition, increasing the hydrogen content enhanced the cross-link density, thereby improving the thermal stability of the silicone materials. The prepared hydrogen-containing methyl phenyl silicone resins can thus serve as a cross-linker for addition-curing in high-power LED encapsulation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Synthesis and properties of polymers · Silicone and Siloxane Chemistry · Photopolymerization techniques and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. R.I. Made, Y. Gao, G.J. Syaranamual, W.A. Sasangka, L. Zhang, X.S. Nguyen, Y.Y. Tay, J.S. Herrin, C.V. Thompson, and C.L. Gan, Microelectron. Reliab. 76–77, 561 (2017).10.1016/j.microrel.2017.07.072 ↗
2. T. Cheng, X. Luo, S. Huang, and S. Liu, Int. J. Therm. Sci. 49, 196 (2010).10.1016/j.ijthermalsci.2009.07.010 ↗
3. X. Luo, R. Hu, S. Liu, and K. Wang, Prog. Energy Combust. Sci. 56, 1 (2016).10.1016/j.pecs.2016.05.003 ↗
4. K.A. Bulashevich, M.S. Ramm, and S.Y. Karpov, Phys. Status Solidi 6, S804 (2009).
5. Z. Liu, S. Liu, K. Wang, and X. Luo, Front. Optoelectron. 2, 119 (2009).10.1007/s12200-009-0011-2 ↗
6. W.F. Schroeder, E.I. dell Erba, and G.F. Arenas, Polym. Adv. Technol. 24, 430 (2013).10.1002/pat.3101 ↗
7. S.C. Yang, S.Y. Kwak, J.H. Jin, J.S. Kim, Y. Choi, K.W. Paik, and B.S. Bae, J. Mater. Chem. 22, 8874 (2012).10.1039/c2jm16355a ↗
8. T. Li, J. Zhang, H. Wang, Z. Hu, Y. Yu, and A.C.S. Appl, Mater. Interfaces 5, 8968 (2013).10.1021/am402035r ↗
9. Y.T. Lin, Y.H. Li, I.A. Lei, C.Y. Kuo, C.F. Lee, and W.Y. Chiu, Mater. Chem. Phys. 206, 136 (2018).10.1016/j.matchemphys.2017.12.011 ↗
10. I.A. Lei, D.F. Lai, T.M. Don, W.C. Chen, Y.Y. Yu, and W.Y. Chiu, Mater. Chem. Phys. 144, 41 (2014).10.1016/j.matchemphys.2013.12.009 ↗
11. Z. Jiang, J. Zhang, and S. Feng, J. Appl. Polym. Sci. 104, 4144 (2007).10.1002/app.26029 ↗
12. J. Chen, Z. Fu, X. Zeng, H. Huang, and Z. Chen, RSC Adv. 6, 71924 (2016).10.1039/C6RA08295E ↗
13. X. Li, Y. Feng, X. Tan, Y. Han, and X. Sun, J. Macromol. Sci. Part A Pure Appl. Chem. 54, 690 (2017).10.1080/10601325.2017.1322466 ↗
14. D.D. Li, S. Li, S. Zhang, X.W. Liu, and C.P. Wong, IEEE Trans. Compon. Packag. Manuf. Technol. 4, 190 (2014).10.1109/TCPMT.2013.2292541 ↗
15. J.S. Kim, S.C. Yang, S.Y. Kwak, Y. Choi, K.W. Paik, and B.S. Bae, J. Mater. Chem. 22, 7954 (2012).10.1039/c2jm16907j ↗
16. S. Zhao and S. Feng, J. Appl. Polym. Sci. 88, 3066 (2003).10.1002/app.11912 ↗
17. S. Watzke and P. Altieri-Weimar, Microelectron. Reliab. 55, 733 (2015).10.1016/j.microrel.2015.02.008 ↗
18. Z. Pan, S. Zhu, B. Huang, and L. Zhu, J. Electron. Mater. 48, 2865 (2019).10.1007/s11664-019-07015-x ↗
19. P. Singh and C.M. Tan, Opt. Mater. 86, 148 (2018).10.1016/j.optmat.2018.10.009 ↗