Performance of a Thermoelectric Module Based on n-Type (La0.12Sr0.88)0.95TiO3−δ and p-Type Ca3Co4−xO9+δ
Source abstract
Abstract
Abstract Here, we present the performance of a thermoelectric (TE) module consisting of n-type (La0.12Sr0.88)0.95TiO3 and p-type Ca3Co4−xO9+δ materials. The main challenge in this investigation was operating the TE module in different atmospheric conditions, since n-type has optimum TE performance at reducing conditions, while p-type has optimum at oxidizing conditions. The TE module was exposed to two different atmospheres and demonstrated higher stability in N2 atmosphere than in air. The maximum electrical power output decreased after 40 h when the hot side was exposed to N2 at 600°C, while only 1 h at 400°C in ambient air was enough to oxidize (La0.12Sr0.88)0.95TiO3 followed by a reduced electrical power output. The module generated maximum electrical power of 0.9 mW (∼ 4.7 mW/cm2) at 600°C hot side and δT ∼ 570 K in N2, and 0.15 mW (∼ 0.8 mW/cm2) at 400°C hot side and δT ∼ 370 K in air. A stability limit of Ca3Co3.93O9+δ at ∼ 700°C in N2 was determined by in situ high-temperature x-ray diffraction.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Expansion and Ionic Conductivity · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. D. Milić, A. Prijić, Lj Vračar, and Z. Prijić, Appl. Therm. Eng. 121, 74 (2017).10.1016/j.applthermaleng.2017.04.037 ↗
2. D. Tainoff, A. Proudhom, C. Tur, T. Crozes, S. Dufresnes, S. Dumont, D. Bourgault, and O. Bourgeois, Nano Energy 57, 804–810 (2019).10.1016/j.nanoen.2019.01.006 ↗
3. K. Jaakkola and K. Tappura, IEEE Sens. J. 18, 7193 (2018).10.1109/JSEN.2018.2852561 ↗
4. M. Guan, K. Wang, D. Xu, and W.-H. Liao, Energy Convers. Manag. 138, 30 (2017).10.1016/j.enconman.2017.01.049 ↗
5. G. Gromov, Advanced Micro and Nanosystems (New York: Wiley, 2017).
6. M. Ohtaki, K. Araki, and K. Yamamoto, J. Electron. Mater. 38, 1234 (2009).10.1007/s11664-009-0816-1 ↗
7. L. Bocher, M.H. Aguirre, D. Logvinovich, A. Shkabko, R. Robert, M. Trottmann, and A. Weidenkaff, Inorg. Chem. 47, 8077 (2008).10.1021/ic800463s ↗
8. Z. Lu, H. Zhang, W. Lei, D.C. Sinclair, and I.M. Reaney, Chem. Mater. 28, 925 (2016).10.1021/acs.chemmater.5b04616 ↗
9. M. Bittner, N. Kanas, R. Hinterding, F. Steinbach, J. Räthel, M. Schrade, K. Wiik, M.-A. Einarsrud, and A. Feldhoff, J. Power Sources 410, 143 (2019).10.1016/j.jpowsour.2018.10.076 ↗
10. A.C. Marques, Ph.D. thesis, Faculdade de Ciências da Universidade de Lisboa, Portugal (2009).
11. R. Boston, W.L. Schmidt, G.D. Lewin, A.C. Iyasara, Z. Lu, H. Zhang, D.C. Sinclair, and I.M. Reaney, Chem. Mater. 29, 265 (2017).10.1021/acs.chemmater.6b03600 ↗
12. S. Funahashi, T. Nakamura, K. Kageyama, and H. Ieki, J. Appl. Phys. 109, 124509 (2011).10.1063/1.3599890 ↗
13. D. Sedmidubsky, V. Jakes, O. Jankovsky, J. Leitner, Z. Sofer, and J. Hejtmanek, J. Solid State Chem. 194, 199 (2012).10.1016/j.jssc.2012.05.014 ↗
14. J. Shimoyama, S. Horii, K. Otzschi, M. Sano, and K. Kishio, Jpn. J. Appl. Phys. 42, 194 (2003).10.1143/JJAP.42.L194 ↗
15. N. Kanas, S.P. Singh, M. Rotan, M. Saleemi, M. Bittner, A. Feldhoff, T. Norby, K. Wiik, T. Grande, and M.-A. Einarsrud, J. Eur. Ceram. Soc. 38, 1592 (2018).10.1016/j.jeurceramsoc.2017.11.011 ↗
16. X.-D. Zhou, L.R. Pederson, E. Thomsen, Z. Nie, and G. Coffey, Electrochem. Solid State 12, 2 (2009).10.1149/1.3041157 ↗
17. F. Delorme, P. Diaz-Chao, E. Guilmeau, and F. Giovannelli, Ceram. Int. 41, 10038 (2015).10.1016/j.ceramint.2015.04.091 ↗
18. E.M.M. Ibrahim, L.H. Abdel-Rahman, A.M. Abu-Dief, A. Elshafaie, S.K. Hamdan, and A.M. Ahmed, Mater. Res. Bull. 99, 103 (2018).10.1016/j.materresbull.2017.11.002 ↗
19. S.P. Singh, N. Kanas, T.D. Desissa, M.-A. Einarsrud, M. Johnsson, T. Norby, and K. Wiik, J. Eur. Ceram. Soc. 40, 401 (2020).10.1016/j.jeurceramsoc.2019.09.024 ↗
20. G. Skomedal, T. Vehus, N. Kanas, S.P. Singh, M.-A. Einarsrud, K. Wiik, and P.H. Middleton, Mater. Today Proc. 8, 696 (2019).10.1016/j.matpr.2019.02.070 ↗
21. E. Guilmeau, D. Berardan, C. Simon, A. Maignan, B. Raveau, D. Ovono Ovono, and F. Delorme, J. Appl. Phys. 106, 053715 (2009).10.1063/1.3197064 ↗
22. R. Moos, W. Menesklou, and K.H. Härdtl, Appl. Phys. A 61, 389 (1995).10.1007/BF01540113 ↗
23. R. Moos and K.H. Härdtl, J. Am. Ceram. Soc. 80, 2549 (1997).10.1111/j.1151-2916.1997.tb03157.x ↗
24. V. Bartunek, Š. Huber, D. Sedmibudsky, Z. Sofer, P. Šimek, and O. Jankovky, Ceram. Int. 40, 12591 (2014).10.1016/j.ceramint.2014.04.082 ↗
25. M. Chen, B. Hallstedt, and L.J. Gauckler, J. Phase Equilib. 4, 212 (2003).10.1361/105497103770330514 ↗
26. G. Buttner, S. Populoh, W. Xie, M. Trottman, J. Hertrampf, M. Dobeli, L. Karvonen, S. Yoon, P. Thiel, R. Niewa, and A. Weidenkaff, J. Appl. Phys. 121, 215101 (2017).10.1063/1.4984067 ↗