journal article·2020-02

First-Principles Study of Structural, Elastic, and Thermodynamic Properties of PdSn4 with Ni Addition

Yali Tian, Lifang Zhang, Ping Wu

Journal of Electronic Materials· Volume 49· Issue 2
Publisher page

Abstract

The structural, mechanical, thermodynamic, and electronic properties of PdSn4 with Ni addition are investigated by first-principles calculations. Substitution of Ni for Pd in PdSn4 causes a decrease of the lattice constants as well as cell volume due to the smaller atomic radius of Ni compared with Pd. The studied structures are thermodynamically stable, but the stability decreases with increasing Ni concentration. The bulk modulus increases while the shear modulus, Young’s modulus, hardness, Debye temperature, and minimum heat transfer ability decrease on Ni substitution. PdSn4 is elastic–brittle. Substitution leads to a ductile structure, and the ductility increases with the Ni fraction except for Pd2Ni2Sn16. The anisotropic character is estimated both based on the formula and graphically, revealing an increasing anisotropic tendency after substitution. Based on their total density of states, all the compounds are metallic. Substitution decreases the hybridization of Pd-d and Sn-p states in the lower energy range but increases the hybridization of Ni-d and Sn-p electrons near the Fermi level.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. C.E. Ho, Y.C. Lin, and S.J. Wang, Thin Solid Films 544, 551 (2013).10.1016/j.tsf.2012.12.070 ↗
2. C.E. Ho, W.H. Wu, L.H. Hsu, and C.S. Lin, J. Electron. Mater. 41, 11 (2012).10.1007/s11664-011-1722-x ↗
3. J.W. Yoon, B.I. Noh, and J.H. Yoon, J. Alloys Compd 509, 153 (2011).10.1016/j.jallcom.2011.01.015 ↗
4. S.P. Peng, W.H. Wu, C.E. Ho, and Y.M. Huang, J. Alloys Compd 493, 431 (2010).10.1016/j.jallcom.2009.12.119 ↗
5. C.-H. Wang, K.-T. Li, and C.-Y. Lin, Intermetallics 67, 102 (2015).10.1016/j.intermet.2015.08.003 ↗
6. C.-H. Wang and K.-T. Li, J. Alloys Compd. 654, 546 (2016).10.1016/j.jallcom.2015.09.132 ↗
7. M.A. Rahman, C.E. Ho, W. Gierlotka, and J.C. Kuo, J. Electron. Mater. 43, 4582 (2014).10.1007/s11664-014-3330-z ↗
8. C.-E. Ho, S.-W. Lin, and Y.-C. Lin, J. Alloys Compd. 509, 7749 (2011).10.1016/j.jallcom.2011.04.142 ↗
9. K. Masui and M. Kajihara, J. Alloys Compd. 485, 144 (2009).10.1016/j.jallcom.2009.05.100 ↗
10. R. Kubiak and M. Wolcyrz, J. Less-Common Metals 97, 265 (1984).10.1016/0022-5088(84)90031-6 ↗
11. S.A. Belyakov and C.M. Gourlay, Intermetallics 25, 48 (2012).10.1016/j.intermet.2012.02.010 ↗
12. C. Schimpf, P. Kalanke, S.L. Shang, Z.K. Liu, and A. Leineweber, Mater. Des. 109, 324 (2016).10.1016/j.matdes.2016.07.002 ↗
13. W.J. Boettinger, M.D. Vaudin, M.E. Williams, L.A. Bendersky, and W.R. Wagner, J. Electron. Mater. 32, 511 (2003).10.1007/s11664-003-0135-x ↗
14. G. Kresse and J. Furthmüller, Phys. Rev. B 54, 11169 (1996).10.1103/PhysRevB.54.11169 ↗
15. J.P. Perdew, K. Burke, and M. Ernzerhof, Phys. Rev. Lett. 77, 3865 (1996).10.1103/PhysRevLett.77.3865 ↗
16. H.J. Monkhorst and J.D. Pack, Phys. Rev. B 13, 5188 (1976).10.1103/PhysRevB.13.5188 ↗
17. M. Methfessel and A.T. Paxton, Phys. Rev. B 40, 3616 (1989).10.1103/PhysRevB.40.3616 ↗
18. Y. Yang, Y.Z. Li, H. Lu, C. Yu, and J.M. Chen, Comput. Mater. Sci. 65, 490 (2012).10.1016/j.commatsci.2012.08.027 ↗
19. J. Nylén, F.J. Garcìa Garcìa, B.D. Mosel, R. Pöttgen, and U. Häussermann, Solid State Sci. 6, 147 (2004).10.1016/j.solidstatesciences.2003.09.011 ↗
20. S. Ramos de Debiaggi, C. Deluque Toro, G.F. Cabeza, A. Fernández Guillermet, J. Alloys Compd.576, 302 (2013)10.1016/j.jallcom.2013.03.047 ↗
21. G. Ghosh, Metall. Mater. Trans. A 40A, 4 (2009).10.1007/s11661-008-9682-3 ↗
22. S.Q. Wang and H.Q. Ye, J. Phys.: Condens. Matter. 15, 5307 (2003).
23. L. Fast, J.M. Wills, B. Johansson, and O. Eriksson, Phys. Rev. B 51, 17431 (1995).10.1103/PhysRevB.51.17431 ↗
24. J.L. Du, B. Wen, R. Melnik, and Y. Kawazoe, J. Alloys Compd. 588, 96 (2014).10.1016/j.jallcom.2013.11.018 ↗
25. M.L. Wang, Z. Chen, C.J. Xia, Y. Wu, and D. Chen, Mater. Chem. Phys. 197, 145 (2017).10.1016/j.matchemphys.2017.05.032 ↗
26. H.-C. Cheng, C.-F. Yu, and W.-H. Chen, J. Alloys Compd. 546, 286 (2013).10.1016/j.jallcom.2012.08.077 ↗
27. X.D. Zhang, C.H. Ying, and Z.J. Li, Superlattices Microstruct. 52, 459 (2012).10.1016/j.spmi.2012.06.001 ↗
28. C.M. Li, S.M. Zeng, and Z.Q. Chen, Comput. Mater. Sci. 93, 210 (2014).10.1016/j.commatsci.2014.06.031 ↗
29. S.I. Ranganathan and M. Ostoja-Starzewskl, Phys. Rev. Lett. 101, 055504 (2008).10.1103/PhysRevLett.101.055504 ↗
30. Y. Liu, X. Chong, Y. Jiang, R. Zhou, and J. Peng, Phys. B Condens. Matter 506, 1 (2017).10.1016/j.physb.2016.10.032 ↗
31. Y.H. Duan, Y. Sun, and M.J. Peng, Comput. Mater. Sci. 92, 258 (2014).10.1016/j.commatsci.2014.05.067 ↗
32. D.R. Clarke and C.G. Levi, Annu. Rev. Mater. Res. 33, 383 (2003).10.1146/annurev.matsci.33.011403.113718 ↗