journal article·2019-06

The Influence of Various Dopants and Sintering Techniques on the Properties of the Yttria-Ceria-Zirconia System As an Electrolyte for Solid Oxide Fuel Cells

Payal Sharma, Kanchan L. Singh, Anirudh P. Singh, Chetan Sharma, Sonia Mago

Journal of Electronic Materials· Volume 48· Issue 6
Publisher page

Abstract

Zirconia-based ceramic oxides Zr0.90Y0.06Ce0.02X0.02O2−δ (X = Ca, Fe, La, Sr, and Mg) were prepared by conventional and microwave processing. The precursors of Zr0.90Y0.06Ce0.02X0.02O2−δ (X = Ca, Fe, La, Sr, and Mg) were prepared by a mixed oxide method and were calcined at 600°C in an electric furnace. The powders were consolidated in pellet form and sintered in a conventional electric furnace at 1400°C for 6 h and compared using microwave energy at 1400°C for 20 min. The structure and microstructure of sintered products obtained by both methods were studied by x-ray diffraction and scanning electron microscopy. Their density and microhardness were also compared. The electrical conductivities of these samples were studied using alternating current impedance spectroscopy. The analysis of the products obtained by microwave aand conventional methods shows that the microwave sintered samples have uniform grain growth, higher density, higher microhardness and higher electrical conductivity than the corresponding conventionally sintered products. The microwave sintered sample of composition Zr0.90Y0.06Ce0.02Ca0.02O2−δ was found to have the highest density and microhardness, as well as the highest electrical conductivity among all of the microwave and conventionally sintered products.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalysis and Oxidation Reactions · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. A. Choudhury, H. Chandra, and A. Arora, Renew. Sustain. Energy Rev. 20, 430 (2013).10.1016/j.rser.2012.11.031 ↗
2. E.S.M. Seo, W.K. Yoshito, V. Ussui, D.R.R. Lazar, S.R.H.D.M. Castanho, and J.O.A. Paschoal, Mater. Res. 7, 215 (2004).10.1590/S1516-14392004000100029 ↗
3. S.C. Singhal, Solid State Ion. 135, 305 (2000).10.1016/S0167-2738(00)00452-5 ↗
4. G. Xu, Y.W. Zhang, C.S. Liao, and C.H. Yan, Solid State Ion. 166, 391 (2004).10.1016/j.ssi.2003.11.014 ↗
5. S. Ramesh, C.K. Ng, C.Y. Tan, W.H. Wong, C.Y. Ching, A. Muchtar, and P. Devaraj, Ceram. Int. 42, 14469 (2016).10.1016/j.ceramint.2016.06.050 ↗
6. A. Ghazanfari, W. Li, M.C. Leu, J.L. Watts, and G.E. Hilmas, Ceram. Int. 43, 6082 (2017).10.1016/j.ceramint.2017.01.154 ↗
7. J.R. Kelly and I. Denry, Dent. Mater. 24, 289 (2008).10.1016/j.dental.2007.05.005 ↗
8. Z.G. Lv, P. Yao, R.S. Guo, and F.Y. Dai, Mater. Sci. Eng. A 458, 355 (2007).10.1016/j.msea.2006.12.072 ↗
9. M.D. Ridder, R.G. Welzenis, H.H. Brongersma, and U. Kreissig, Solid State Ion. 158, 67 (2003).10.1016/S0167-2738(02)00759-2 ↗
10. M. Biswas and K.C. Sadanala, J. Powder Metall. Min. 2, 4 (2013).
11. H.P. Dasari, J.S. Ahn, K. Ahn, S.Y. Park, J. Hong, H. Kim, K.J. Yoon, J.W. Son, H.W. Lee, and J.H. Lee, Solid State Ion. 263, 103 (2014).10.1016/j.ssi.2014.05.013 ↗
12. O. Yamamoto, Electrochem. Acta 45, 2423 (2000).10.1016/S0013-4686(00)00330-3 ↗
13. S. Hong, J. Bae, B. Koo, and Y.B. Kim, Electrochem. Commun. 47, 1 (2014).10.1016/j.elecom.2014.07.008 ↗
14. Z. Jiang, L. Zhang, L. Cai, and C. Xia, Electrochem. Acta 54, 3059 (2009).10.1016/j.electacta.2008.11.067 ↗
15. P.C. Su, C.C. Chao, J.H. Shim, R. Fasching, and F.B. Prinz, Nano Lett. 8, 2289 (2008).10.1021/nl800977z ↗
16. J.H. Shim, C.C. Chao, H. Huang, and F.B. Prinz, Chem. Mater. 19, 3850 (2007).10.1021/cm070913t ↗
17. H. Huang, M. Nakamura, P. Su, R. Fasching, Y. Saito, and F.B. Prinz, Electrochem. Soc. 154, B20 (2007).10.1149/1.2372592 ↗
18. T.I. Politova and J.T.S. Irvine, Solid State Ion. 168, 153 (2004).10.1016/j.ssi.2004.02.007 ↗
19. G.K. Meenashisundaram, T.H.D. Ong, G. Parande, V. Manakari, X. Shulin, and M. Gupta, J. Rare Earth 35, 723 (2017).10.1016/S1002-0721(17)60969-4 ↗
20. D.J. Kim, J. Am. Ceram. Soc. 72, 1415 (1989).10.1111/j.1151-2916.1989.tb07663.x ↗
21. R. Gerhardt, A.S. Nowick, M.E. Mochel, and I. Dumler, J. Am. Soc. 69, 647–651 (1986).
22. K. Tanwar, N. Jaiswal, D. Kumar, and O. Parkash, J. Alloys Compd. 684, 683 (2016).10.1016/j.jallcom.2016.05.223 ↗
23. T.S. Zhang, J. Ma, Y.J. Leng, S.H. Chan, P. Hing, and J.A. Kilner, Solid State Ion. 168, 187 (2004).10.1016/j.ssi.2004.02.015 ↗
24. H. Yamamura, E. Katoh, M. Ichikawa, K. Kakinuma, T. Mori, and H. Haneda, Electrochem. 68, 455 (2000).10.5796/electrochemistry.68.455 ↗
25. M.T. Vinas, F. Zhang, J. Vleugels, and M. Anglada, J. Eur. Ceram. Soc. 38, 2621 (2018).10.1016/j.jeurceramsoc.2017.12.053 ↗
26. D.E. Clark and W.H. Sutton, Annu. Rev. Mater. Sci. 26, 299 (1996).10.1146/annurev.ms.26.080196.001503 ↗
27. R.R. Mishra and A.K. Sharma, Compos. Part A Appl. Sci. Manuf. 81, 78 (2016).10.1016/j.compositesa.2015.10.035 ↗
28. A. Goldstein, N. Travitzky, A. Singurindy, and M. Kravchik, J. Eur. Ceram. Soc. 19, 2067 (1999).10.1016/S0955-2219(99)00020-5 ↗
29. S. Bodhak, S. Bose, and A. Bandyopadhyay, J. Am. Ceram. Soc. 94, 32 (2011).10.1111/j.1551-2916.2010.04062.x ↗
30. G. Sethi, A. Upadhyaya, and D. Agrawal, Sci. Sinter. 35, 49 (2003).10.2298/SOS0302049S ↗
31. K.L. Singh, A. Kumar, A.P. Singh, and S.S. Sekhon, Bull. Mater. Sci. 31, 655 (2008).10.1007/s12034-008-0104-3 ↗
32. A.P. Singh, N. Kaur, K.L. Singh, and A. Kumar, J. Am. Ceram. Soc. 90, 789 (2007).10.1111/j.1551-2916.2006.01379.x ↗
33. P. Sharma, C. Sharma, K.L. Singh, and A.P. Singh, JOM 70, 1398 (2018).10.1007/s11837-018-2928-7 ↗
34. K.L. Singh, A. Kumar, A.P. Singh, and S.S. Sekhon, in American Ceramic Society Conference Proceedings, Florida, USA (2008).
35. K.L. Singh, P. Sharma, A.P. Singh, A. Kumar, and S.S. Sekhon, JOM 69, 2448 (2017).10.1007/s11837-016-2145-1 ↗
36. H.S. Thamyscira, P.F.G. João, J.A. Francisco, D.P.F. Loureiroc, F.C. Fonsecad, and D.A. Macedoa, Ceram. Int. 44, 2745 (2018).10.1016/j.ceramint.2017.11.009 ↗
37. J. Yang, B. Ji, J. Si, Q. Zhang, Q. Yin, J. Xie, and C. Tian, Int. J. Hydrog. Energy 41, 15979 (2016).10.1016/j.ijhydene.2016.04.212 ↗
38. B.D. Cullity, Elements of X-Ray Diffraction, 2nd ed. (Reading: Addison-Wesley, 1978).
39. A.A. Jais, S.M. Ali, M. Anwar, M.R. Somalu, A. Muchtar, W.N. Isahak, and N.P. Brandon, Ceram. Int. 43, 8119 (2017).10.1016/j.ceramint.2017.03.135 ↗
40. R.V. Manglaraja, S. Ananthakumar, A. Scachtsiek, M.L. Carlos, P. Camurri, and R.E. Alvia, Mater. Sci. Eng. A 527, 3645 (2010).10.1016/j.msea.2010.01.025 ↗
41. T. Kumatso, T. Noguchi, and Y. Benino, J. Non-Cryst. Solids 222, 206 (1997).10.1016/S0022-3093(97)00361-X ↗
42. S. Khan and K. Singh, Ceram. Int. 45, 695 (2019).10.1016/j.ceramint.2018.09.231 ↗
43. A. Zevalkink, A. Hunter, M. Swanson, C. Johnson, J. Kapat, N. Orlovskaya, and M.R.S. Symp, Proc. Ser. 972, 163 (2007).
44. R. Grosso and E. Muccillo, J. Power Sources 233, 6 (2013).10.1016/j.jpowsour.2013.01.140 ↗
45. S. Yarmolenko, J. Sankar, N. Bernier, M. Klimov, J. Kapat, and N. Orlovskaya, J. Fuel Cell Sci. Technol. 6, 021007 (2009).10.1115/1.2971126 ↗
46. J.T. Irvine and P. Connor, Solid Oxide Fuels Cells: Facts and Figures (London: Springer, 2013).10.1007/978-1-4471-4456-4 ↗
47. H. Bouhamed, Mater. Sci. Eng. B 225, 182 (2017).10.1016/j.mseb.2017.08.020 ↗
48. E.C. Subbarao, Zirconia—an overview.Advances in Ceramics, Science and Technology of Zirconia, Vol. 3, ed. A.H. Heuer and L.W. Hobbs (Amsterdam: Elsevier, 1981), pp. 1–24.
49. R.H.J. Hannink, P.M. Kelly, and B.C. Muddle, J. Am. Ceram. Soc. 83, 461 (2000).10.1111/j.1151-2916.2000.tb01221.x ↗
50. Y. Kan, S. Li, P. Wang, G.J. Zhang, O.V.D. Biest, and J. Vleugels, Solid State Ion. 179, 1531 (2008).10.1016/j.ssi.2008.03.003 ↗
51. O. Bohnke, V. Gunes, K.V. Kravchyk, A.G. Belous, O.Z. Yanchevskii, and O.I. V’Yunov, Solid State Ion. 262, 517 (2014).10.1016/j.ssi.2013.11.003 ↗
52. M.N. Rahman, J.R. Gross, and R.E. Dutton, Acta Mater. 54, 1615 (2006).10.1016/j.actamat.2005.11.033 ↗
53. A.R. Denton and N.W. Ashcroft, Phys. Rev. A 43, 3161 (1991).10.1103/PhysRevA.43.3161 ↗
54. A.J. Flegler, T.E. Burye, Q. Yang, and J.D. Nicholas, Ceram. Int. 40, 16323 (2014).10.1016/j.ceramint.2014.07.071 ↗
55. H. Inaba, T. Nakajima, and H. Tagawal, Solid State Ion. 106, 263 (1998).10.1016/S0167-2738(97)00496-7 ↗
56. N. Orlovskaya, S. Lukich, G. Subhash, T. Graule, and J. Kuebler, J. Power Sources 195, 2774 (2010).10.1016/j.jpowsour.2009.11.016 ↗
57. S.L. Hwang, I.W. Chen, and J. Am, Ceram. Soc. 73, 3269 (1990).10.1111/j.1151-2916.1990.tb06449.x ↗
58. J.A. Allemann, B. Michel, H.-B. Märkia, L.J. Gaucklera, and E.M. Moserb, J. Eur. Ceram. Soc. 15, 951 (1995).10.1016/0955-2219(95)00073-4 ↗
59. S.C. Sharma, N.M. Gokhale, R. Dayal, and R. Lal, Bull. Mater. Sci. 25, 15 (2002).10.1007/BF02704588 ↗
60. S.I. Ahmad, P.K. Rao, and I.A. Syed, J. Taibah Univ. Sci. 10, 381 (2016).10.1016/j.jtusci.2015.04.003 ↗
61. X. Miao, D. Sun, P.W. Hoo, J. Liu, Y. Hu, and Y. Chen, Ceram. Int. 30, 1041 (2004).10.1016/j.ceramint.2003.10.025 ↗
62. H. Zhou, J. Li, D. Yi, and L. Xiao, Phys. Procedia 22, 14 (2011).10.1016/j.phpro.2011.11.005 ↗
63. T. Hiratoko, A. Yoneda, and M. Osako, Ceram. Int. 40, 12471 (2014).10.1016/j.ceramint.2014.04.101 ↗
64. F. Yuan, J. Wang, H. Miao, C. Goo, and W.G. Wang, J. Alloys Compd. 549, 200 (2013).10.1016/j.jallcom.2012.09.089 ↗
65. S.P. Miller, B.I. Dunlap, and A.S. Fleisher, Solid State Ion. 253, 130 (2013).10.1016/j.ssi.2013.08.042 ↗
66. R.H.L. Garcia, V. Ussui, N.B. de Lima, E.N.S. Muccillo, and D.R.R. Lazar, J. Alloys Compd. 486, 747 (2009).10.1016/j.jallcom.2009.06.204 ↗