Elevated Temperature Behavior of CuPb18SbTe20/Nano-Ag/Cu Joints for Thermoelectric Devices
Source abstract
Abstract
The thermal stability of the CuPb18SbTe20 thermoelectric legs and Cu electrodes bonded through sintering of nano-silver (n-Ag) paste was investigated after isothermal annealing of the joint at 400°C and 500°C for different times. The legs, prepared from spark plasma sintered (SPS) compacts of the pure CuPb18SbTe20 phase were electroplated with a 3-5 μm thick Ni barrier layer prior to bonding with the electrodes. The n-Ag layer, sintered to a relative density of around 95%, produced defect-free joints with interfaces excluding any reaction layers. The lowest specific contact resistance i.e., 136 μΩ cm2 was observed in joints with the 5 μm n-Ag layer, though it was increased about five times without a Ni barrier layer. Following thermal treatment, various interfaces of the n-CuPb18SbTe20/n-Ag/Cu joints underwent degradation reactions to produce compounds such as Cu2Te, Ag2Te in the TE legs. Under long duration of thermal treatment at 400°C, the Ni barrier layer also completely dissolved and formed a Ni (Sb1−xTex)1+y phase. The Seebeck coefficient and the electrical resistivity of the TE legs were degraded to the tune of 42 and 165%, respectively, due to the formation of secondary phases. The bonding of CuPb18SbTe20 legs and Cu electrodes through sintering of n-Ag paste necessitates a suitable barrier layer that is stable at 500°C, the intended maximum operating temperatures of PbTe-based modules.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Advanced Thermodynamics and Statistical Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. D.M. Rowe, Thermoelectrics Handbook: Macro to Nano (Oxford: Taylor and Francis Group, 2006).
2. G. Tan, F. Shi, S. Hao, L.D. Zhao, H. Chi, X. Zhang, C. Uher, C. Wolverton, V.P. Dravid, and M.G. Kanatzidis, Nat. Commun. 7, 12167 (2016).10.1038/ncomms12167 ↗
3. K.F. Hsu, S. Loo, F. Guo, W. Chen, J.S. Dyck, C. Uher, T. Hogan, E.K. Polychroniadis, and M.G. Kanatzidis, Science 303, 818 (2004).10.1126/science.1092963 ↗
4. W. Liu, Q. Jie, H.S. Kim, and Z. Ren, Acta Mater. 87, 357 (2015).10.1016/j.actamat.2014.12.042 ↗
5. Q.H. Zhang, X.Y. Huang, S.Q. Bai, X. Shi, C. Uher, and L.D. Chen, Adv. Eng. Mater. 18, 194 (2016).10.1002/adem.201500333 ↗
6. A.L. Eiss, Thermoelectric Bonding Study (NASA: Washington D.C, 1966).
7. H.C. Hsieh, C.H. Wang, W.C. Lin, S. Chakroborty, T.H. Lee, H.S. Chu, and A.T. Wu, J. Alloys Compd. 728, 1023 (2017).10.1016/j.jallcom.2017.09.051 ↗
8. X. Hu, P. Jood, M. Ohta, M. Kunii, K. Nagase, H. Nishiate, M.G. Kanatzidis, and A. Yamamoto, Energy Environ. Sci. 9, 517 (2016).10.1039/C5EE02979A ↗
9. T.H. Chuang, W.T. Yeh, C.H. Chuans, and J.D. Hwang, J. Alloys Compd. 613, 46 (2014).10.1016/j.jallcom.2014.06.020 ↗
10. T.H. Chung, H.J. Lin, C.H. Chuang, W.T. Yeh, J.D. Hwang, and H.S. Chu, J. Electron. Mater. 43, 4610 (2014).10.1007/s11664-014-3430-9 ↗
11. H. Xia, F. Drymiotis, C.L. Chen, A. Wu, and G.J. Snyder, J. Mater. Sci. 49, 1716 (2014).10.1007/s10853-013-7857-9 ↗
12. X.R. Ferreres, S.A. Yamini, M. Nancarrow, and C. Zhang, Mater. Des. 107, 90 (2016).10.1016/j.matdes.2016.06.038 ↗
13. X.R. Ferreres, A. Gazder, A. Manettas, and S.A. Yamini, ACS Appl. Energy Mater. 1, 348 (2018).10.1021/acsaem.7b00010 ↗
14. M. Weinstein and A.I. Mlavsky, Rev. Sci. Instrum. 33, 1119 (1962).10.1063/1.1717707 ↗
15. A. Singh, S. Bhattacharya, C. Thinaharan, D.K. Aswal, S.K. Gupta, J.V. Yakhmi, and K. Bhanumurthy, J. Phys. D Appl. Phys. 42, 015502 (2009).10.1088/0022-3727/42/1/015502 ↗
16. H. Xia, C.L. Chen, F. Drymiotis, A. Wu, Y.Y. Chen, and G.J. Synder, J. Electron. Mater. 43, 4064 (2014).10.1007/s11664-014-3350-8 ↗
17. D. Ben-Ayoun, Y. Sadia, and Y. Gelbstein, Materials 11, 99 (2018).10.3390/ma11010099 ↗
18. H. Xia, F. Drymiotis, C.L. Chen, A. Wu, Y.Y. Chen, and G.J. Synder, J. Mater. Sci. 50, 2700 (2015).10.1007/s10853-015-8820-8 ↗
19. D.K. Aswal, R. Basu, and A. Singh, Energy Convers. Manag. 114, 50 (2016).10.1016/j.enconman.2016.01.065 ↗
20. D. Zhao, X. Li, L. He, W. Jiang, and L.D. Chen, Intermetallics 17, 136 (2009).10.1016/j.intermet.2008.10.010 ↗
21. W. Chen, S. Chen, S. Tseng, H. Hsiao, Y. Chen, G.J. Snyder, and Y. Tang, J. Alloys Compd. 632, 500 (2015).10.1016/j.jallcom.2015.01.176 ↗
22. M. Gu, X. Xia, X. Huang, S. Bai, X. Li, and L. Chen, J. Alloys Compd. 671, 238 (2016).10.1016/j.jallcom.2016.02.041 ↗
23. M. Edwards, K. Brinkfeldt, U. Rusche, T. Bukes, G. Gaiser, M.D. Silva, and D. Andersson, Microelectron. Reliab. 55, 722 (2015).10.1016/j.microrel.2015.02.004 ↗
24. H. Li, H. Jing, Y. Han, G. Lu, L. Xu, and T. Liu, Mater. Des. 89, 604 (2016).10.1016/j.matdes.2015.09.163 ↗
25. H. Li, H. Jing, Y. Han, G. Lu, L. Xu, and T. Liu, J. Alloys Compd. 659, 95 (2016).10.1016/j.jallcom.2015.11.057 ↗
26. A. Stranz, A. Waag, and E. Peiner, J. Electron. Mater. 44, 2055 (2015).10.1007/s11664-015-3655-2 ↗
27. W. Wu, A. Bentaleb, A. Waag, and E. Peiner, Mater. Today Proc. 5, 10401 (2018).10.1016/j.matpr.2017.12.288 ↗
28. J.L. Lensch-Falk, J.D. Sugar, M.A. Hekmaty, and D.L. Medlin, J. Alloys Compd. 504, 37 (2010).10.1016/j.jallcom.2010.05.054 ↗
29. A.S. Pashinkin and V.A. Fedorov, Inorg. Mater. 39, 539 (2003).10.1023/A:1024003932461 ↗
30. S. Bajaj, G.S. Pomrehn, J.W. Doak, W. Gierlotka, H.J. Wu, S.W. Chen, C. Wolverton, W.A. Goddard, and G.J. Snyder, Acta Mater. 92, 72 (2015).10.1016/j.actamat.2015.03.034 ↗
31. Y. Xiao, H. Wu, W. Li, M. Yin, Y. Pei, Y. Zhang, L. Fu, Y. Chen, S.J. Pennycook, L. Huang, J. He, and L.D. Zhao, J. Am. Chem. Soc. 139, 18732 (2017).10.1021/jacs.7b11662 ↗
32. V.Ya. Shemet, L.D. Gulay, J. Stępień-Damm, A. Pietraszko, and I.D. Olekseyuk, J. Alloys Compd. 420, 58 (2006).10.1016/j.jallcom.2005.10.023 ↗
33. Q. Wang, Z. Su, M. Lv, J. Li, B. Sun, and G. Zhang, RSC Adv. 6, 50599 (2016).10.1039/C6RA07779J ↗
34. M.A. Nicolet and M. Bartur, J. Vac. Sci. Technol. 19, 786 (1981).10.1116/1.571149 ↗
35. A.D. Lalonde, Y. Pei, H. Wang, and G.J. Snyder, Mater. Today 14, 526 (2011).10.1016/S1369-7021(11)70278-4 ↗
36. K. Biswas, J. He, I.D. Blum, C.I. Wu, T.P. Hogan, D.N. Seidman, V.P. Dravid, and M.G. Kanatzidis, Nature 489, 414 (2012).10.1038/nature11439 ↗
37. Y. Sadia, T. Ohaion-Raz, O. Ben-Yehuda, M. Korngold, and Y. Gelbstein, J. Solid State Chem. 241, 79 (2016).10.1016/j.jssc.2016.06.006 ↗
38. C.C. Li, F. Drymiotis, L.L. Liao, H.T. Hung, J.H. Ke, C.K. Liu, C.R. Kao, and G.J. Snyder, J. Mater. Chem. C 3, 10590 (2015).10.1039/C5TC01662B ↗
39. C. Schneider, P. Schichtel, B. Mogwitz, M. Rohnke, and J. Janek, Solid State Ionics 303, 119 (2017).10.1016/j.ssi.2017.02.012 ↗
40. T. Grossfeld, A. Sheskin, Y. Gelbstein, and Y. Amouyal, Crystals 7, 281 (2017).10.3390/cryst7090281 ↗
41. W. Liu, H. Wang, L. Wang, X. Wang, G. Joshi, G. Chen, and Z. Ren, J. Mater. Chem. A 1, 13093 (2013).10.1039/c3ta13456c ↗