Mechanism of the Local Cu Protrusion in Cu-Filled Through Silicon Vias Under Heat Treatment
Source abstract
Abstract
Reliability of through silicon via (TSV) structures is a critical issue in the industrialization of TSV technology. One of the most important problems for TSV reliability is the thermal stress induced by a large coefficient of thermal expansion mismatch between different materials in the TSV structure. This mismatch could seriously deteriorate the performance of the TSVs, and even lead to failure. Here, the influence of heating temperature on the microstructure evolution in the TSV structure was investigated. The microstructures of Cu-filled TSV samples under different annealing conditions were characterized, and the phenomenon of global Cu protrusion and local grain-like Cu protrusion were observed in Cu-filled TSVs. Mechanisms of Cu protrusion in TSVs during heat treatment were analyzed, and possible factors involving thermal stress, grain growth, and void formation are discussed. The results showed that the origin of local grain-like TSV-Cu protrusion might be related to grain growth of Cu and the elastic modulus mismatch between coarse Cu grains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. P. Kumar, I. Dutta, and M.S. Bakir, J. Electron. Mater. 41, 322 (2012).10.1007/s11664-011-1726-6 ↗
2. L.W. Kong, A.C. Rudack, P. Krueger, E. Zschech, S. Arkalgud, and A.C. Diebold, Microelectron. Eng. 92, 24 (2012).10.1016/j.mee.2011.04.012 ↗
3. C. Si, Q. Fei, A. Tong, and C. Pei, Effect of electroplating parameter on the TSV-Cu protrusion during annealing, Electronic Components and Technology Conference (Singapore: IEEE, 2016), p. 1599.10.1109/ECTC.2016.62 ↗
4. K. Kondo, No pumping at 450°C with electrodeposited copper TSV, Electronic Components and Technology Conference (Singapore: IEEE, 2016), p. 1265.10.1109/ICEP.2016.7486827 ↗
5. J. An, K.J. Moon, S. Lee, D.S. Lee, K. Yun, B.L. Park, H.J. Lee, J. Sue, Y.L. Park, G. Choi, H.K. Kang, and C. Chung, Annealing process and structural considerations in controlling extrusion-type defects Cu TSV, International Interconnect Technology Conference (San Jose: IEEE, 2012), p. 1.10.1109/IITC.2012.6251586 ↗
6. Y.T. Ding, Y.Y. Yan, Q.W. Chen, S.W. Wang, R. Su, and H. Dang, Microelectron. Reliab. 54, 1384 (2014).10.1016/j.microrel.2014.02.030 ↗
7. C. Okoro, L.E. Levine, R.Q. Xu, and Y. Obeng, J. Mater. Sci. 50, 6236 (2015).10.1007/s10853-015-9184-9 ↗
8. C. Okoro, R. Labie, K. Vanstreels, A. Franquet, M. Gonzalez, B. Vandevelde, E. Beyne, D. Vandepitte, and B. Verlinden, J. Mater. Sci. 46, 3868 (2011).10.1007/s10853-011-5308-z ↗
9. I. De Wolf, K. Croes, O.V. Pedreira, R. Labie, A. Redolfi, M. Van De Peer, K. Vanstreels, C. Okoro, B. Vandevelde, and E. Beynea, Microelectron. Reliab. 51, 1856 (2011).10.1016/j.microrel.2011.06.003 ↗
10. C. Okoro, C. Huyghebaert, J. Van Olmen, R. Labie, K. Lambrinou, B. Vandevelde, E. Beyne, and D. Vandepitte, AIP Conf. Proc. 1300, 214 (2010).10.1063/1.3527128 ↗
11. K.H. Lu, S.K. Ryu, Q. Zhao, X. Zhang, J. Im, R. Huang, and P.S. Ho, Thermal stress induced delamination of through silicon vias in 3-D interconnects, Electronic Components and Technology Conference (Las Vegas: IEEE, 2010), p. 40.10.1109/ECTC.2010.5490883 ↗
12. P. Saettler, M. Boettcher, and K.J. Wolter, Characterization of the annealing behavior for copper-filled TSVs, Electronic Components and Technology Conference (San Diego: IEEE, 2012), p. 619.10.1109/ECTC.2012.6248895 ↗
13. P. Bayat, D. Vogel, R.D. Rodriguez, E. Sheremet, D.R.T. Zahn, S. Rzepka, and B. Michel, Microelectron. Eng. 137, 101 (2015).10.1016/j.mee.2015.02.004 ↗
14. I. Dutta, P. Kumar, and M.S. Bakir, JOM-US 63, 70 (2011).10.1007/s11837-011-0179-y ↗
15. A. Heryanto, W.N. Putra, A. Trigg, S. Gao, W.S. Kwon, F.X. Che, X.F. Ang, J. Wei, R.I. Made, C.L. Gan, and K.L. Pey, J. Electron. Mater. 41, 2533 (2012).10.1007/s11664-012-2117-3 ↗
16. M.H. Roh, A. Sharma, J.H. Lee, and J.P. Jung, Metall. Mater. Trans. A 46a, 2051 (2015).10.1007/s11661-015-2801-z ↗
17. D.N. Lee, Thin Solid Films 434, 183 (2003).10.1016/S0040-6090(03)00538-8 ↗
18. J. Turley and G. Sines, J. Phys. D Appl. Phys. 4, 264 (1971).10.1088/0022-3727/4/2/312 ↗
19. H.-J. Lee, H.N. Han, J.-H. Kim, S.H. Kang, Y.-G. Cho, J.-Y. Sun, D.H. Kim, and K.H. Oh, Appl. Phys. Lett. 92, 141917 (2008).10.1063/1.2906902 ↗
20. R. Abbasi, K. Dzieciol, and A. Borbely, Mater. Sci. Technol. 31, 540 (2015).10.1179/1743284714Y.0000000593 ↗
21. E.M. Bringa, S. Traiviratana, and M.A. Meyers, Acta Mater. 58, 4458 (2010).10.1016/j.actamat.2010.04.043 ↗
22. D.W. Gan, B. Li, and P.S. Ho, Thin Films Stresses and Mechanical Properties XI, ed. T.E. Buchheit, A.M. Minor, R. Spolenak, and K. Takashima (Warrendale, PA: Materials Research Society, 2005), p. 319.