journal article·2016-08Open access

Sn-Ag-Cu Nanosolders: Solder Joints Integrity and Strength

Ali Roshanghias, Golta Khatibi, Andriy Yakymovych, Johannes Bernardi, Herbert Ipser

Journal of Electronic Materials· Volume 45· Issue 8

Abstract

Although considerable research has been dedicated to the synthesis and characterization of lead-free nanoparticle solder alloys, only very little has been reported on the reliability of the respective joints. In fact, the merit of nanoparticle solders with depressed melting temperatures close to the Sn-Pb eutectic temperature has always been challenged when compared with conventional solder joints, especially in terms of inferior solderability due to the oxide shell commonly present on the nanoparticles, as well as due to compatibility problems with common fluxing agents. Correspondingly, in the current study, Sn-Ag-Cu (SAC) nanoparticle alloys were combined with a proper fluxing vehicle to produce prototype nanosolder pastes. The reliability of the solder joints was successively investigated by means of electron microscopy and mechanical tests. As a result, the optimized condition for employing nanoparticles as a competent nanopaste and a novel procedure for surface treatment of the SAC nanoparticles to diminish the oxide shell prior to soldering are being proposed.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · nanoparticles nucleation surface interactions · Nanomaterials and Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. H. Jiang, K. Moon, and C.P. Wong, Microelectron. Reliab. 53, 1968 (2013).10.1016/j.microrel.2013.04.005 ↗
2. J. Sopousek, J. Vrestal, A. Zemanova, and J. Bursik, J. Min. Metall. Sect. B: Metall. 48, 419 (2012).10.2298/JMMB120121032S ↗
3. K.J. Puttlitz and K.A. Stalter, Handbook of Lead-Free Solder Technology for Microelectronic Assemblies (Marcel Dekker Inc., New York, 2004), p. 23910.1201/9780203021484 ↗
4. J.P. Koppes, K.A. Grossklaus, A.R. Muza, R.R. Revur, S. Sengupta, A. Rae, E.A. Stach, and C.A. Handwerker, Mater. Sci. Eng. B 177, 197 (2012).10.1016/j.mseb.2011.12.019 ↗
5. Y. Shu, K. Rajathurai, F. Gao, Q. Cui, and Z. Gu, J. Alloys Compd. 626, 391 (2015).10.1016/j.jallcom.2014.11.173 ↗
6. F. Frongia, M. Pilloni, and A. Scano, J. Alloys Compd. 623, 7 (2015).10.1016/j.jallcom.2014.08.122 ↗
7. A. Roshanghias, A. Yakymovych, J. Bernardi, and H. Ipser, Nanoscale 7, 5843 (2015).10.1039/C5NR00462D ↗
8. Y. Gao, C. Zou, B. Yang, Q. Zhai, J. Liu, E. Zhuravlev, and C. Schick, J. Alloys Compd. 484, 777 (2009).10.1016/j.jallcom.2009.05.042 ↗
9. A. Roshanghias, J. Vrestal, A. Yakymovych, K.W. Richter, and H. Ipser, CALPHAD 49, 101 (2015).10.1016/j.calphad.2015.04.003 ↗
10. K.C. Yung, C.M.T. Law, C.P. Lee, B. Cheung, and T.M. Yue, J. Electron. Mater. 41, 313 (2012).10.1007/s11664-011-1765-z ↗
11. Solder Paste Task Group, Requirements for Soldering Pastes “J-STD-005” (Electronic Industries Alliance and IPC, Arlington, VA, 1995)
12. J.S. Hwang, Solder Paste in Electronics Packaging, (Springer, New York, 2012), p. 52
13. Association Connecting Electronics Industries (IPC), Acceptability of Electronic Assemblies “IPC-A-610” (Bannockburn, IL, 2010)
14. H.M. Henao, C. Masuda, and K. Nogita, Int. J. Miner. Process. 137, 98 (2015).10.1016/j.minpro.2015.02.006 ↗
15. F. Gao, K. Rajathurai, Q. Cui, G. Zhou, I. NkengforAcha, and Z. Gu, Appl. Surf. Sci. 258, 7507 (2012).10.1016/j.apsusc.2012.04.074 ↗
16. B.S. Kim, J.C. Lee, H.S. Yoon, and S. Kim, Mater. Trans. 52, 1814 (2011).10.2320/matertrans.M2011118 ↗
17. S. Itoh and K. Maruyama, High Temp. Mater. Process 30, 317 (2011).10.1515/htmp.2011.051 ↗
18. M. Pecht, Soldering Processes and Equipment (Wiley, New York, 1993), p. 9.
19. V. Simic and Z. Marinkovic, J. Less Common Met. 95, 259 (1983).10.1016/0022-5088(83)90519-2 ↗
20. A. Roshanghias, A.H. Kokabi, Y. Miyashita, Y. Mutoh, and H.R. Madaah-Hosseini, J. Mater. Sci. 24, 839 (2013).
21. P. Zimprich, A. Betzwar-Kotas, G. Khatibi, B. Weiss, and H. Ipser, J. Mater. Sci. 19, 383 (2008).
22. G.A. Storaska and J.M. Howe, Mater. Sci. Eng., A 368, 183 (2004).10.1016/j.msea.2003.10.315 ↗
23. J. Emsley, The Elements (Clarendon Press, Oxford, 1989), p. 196.
24. R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 4th ed. (Wiley, New York, 1996), p.␣11, 22, 45, 233.
25. R. Garrigos, P. Cheyssac, and R. Kofman, Z. Phys. D 12, 497 (1989).10.1007/BF01427006 ↗
26. W. Hu, S. Xiao, J. Yang, and Z. Zhang, Eur. Phys. J. B 45, 547 (2005).10.1140/epjb/e2005-00210-8 ↗
27. A. Pomogailo and G.I. Dzhardimalieva, Nanostructured Materials Preparation via Condensation Ways (Springer, Dordrecht, 2014), p. 1310.1007/978-90-481-2567-8 ↗